# Invocation command line:
# /cpu2006/bin/runspec -c amd1002mc-rate-revC.cfg --rate -T all -o all int --nopreenv --note-preenv
# output_root was not used for this run
############################################################################
# AMD SPEC CPU2006 V1.1 Rate Configuration File for 64-bit Linux
#
#      CPU2006 Version              1.1
#      Compiler name/version:       Open64 4.2.4
#      Operating system version:    64-bit Linux
#      Hardware:                    AMD Opteron (Magny-Cours)
#      FP Base Pointer Size:        64-bit only
#      FP Peak Pointer Size:        32/64-bit
#      INT Base Pointer Size:       32/64-bit
#      INT Peak Pointer Size:       32/64-bit
#      Auto Parallization:          Yes
#
# Important! Please run with your stack size set to 'unlimited'.
# Failure to do so may cause 483.xalancbmk to get a stack overflow during
# execution.
# Using csh:  unlimit
# Using bash: ulimit -s unlimited
#
# Your LD_LIBRARY_PATH must be set to the location of the dependent
# runtime libraries.  (Though this should be taken care of by the
# preENV_LD_LIBRARY_PATH found in the AMD1002mc-rate-revX.inc file.)
# This line should be commented out during builds.
#
#####################################################################

ext		     = amd1002mc-rate-revC
ignore_errors	     = no
tune		     = base,peak
output_format	     = all
flagsurl000          = http://www.spec.org/cpu2006/flags/hp-amd-linux-flags.20100330.xml
                       $[top]/amd-platform-rate-revC.xml
size		     = test,train,ref
check_md5	     = yes
reportable	     = yes
env_vars             = no
teeout		     = yes
mean_anyway	     = yes
teerunout            = yes
post_setup           = sync

####################################################################
# Include file containing the commonly changed fields
####################################################################

%define inc_file_name AMD1002mc-rate-revC.inc
#include: %{inc_file_name}
#  ----- Begin inclusion of 'AMD1002mc-rate-revC.inc'
############################################################################
#####################################################################
# Paths
#####################################################################

# Set location of run time libraries for runs.
preENV_LD_LIBRARY_PATH = $[top]/amd1002mc-rate-libs-revC/64:$[top]/amd1002mc-rate-libs-revC/32

# Set this path to your SmartHeap Library for builds.
SMARTHEAP_DIR = /root/work/libraries/SmartHeap-8.1/lib

#####################################################################
# Machine Specific Settings
#####################################################################

# If your machine orders nodes sequentially, you have 32GB/socket
# memory using 4GB DIMMS, and your system has huge pages configured,
# most settings will be correctly configured based on the below two
# settings.  See README.amd1002mc-rate for more information.

# How many sockets does your test system have? (2 or 4)
%define num_sockets 4

# How many cores per socket does your system have? (8 or 12)
%define cores_per_socket 12

########################################################################
# You should not need to change anything in this section unless you have
# a non-standard configuration.  See README.amd1002mc-rate for more
# information.
########################################################################

%if ('%{cores_per_socket}' eq '12') && ('%{num_sockets}' eq '2')
% define num_system_huge_pages 10800
% define cores_per_node 6
% define mem_size 64
% define mem_sticks 16
%elif ('%{cores_per_socket}' eq '12') && ('%{num_sockets}' eq '4')
% define num_system_huge_pages 21600
% define cores_per_node 6
% define mem_size 128
% define mem_sticks 32
%elif ('%{cores_per_socket}' eq '8') && ('%{num_sockets}' eq '2')
% define num_system_huge_pages 14336
% define cores_per_node 4
% define mem_size 64
% define mem_sticks 16
%elif ('%{cores_per_socket}' eq '8') && ('%{num_sockets}' eq '4')
% define num_system_huge_pages 28672
% define cores_per_node 4
% define mem_size 128
% define mem_sticks 32
%endif

####################################################################
# Tester information
####################################################################
license_num	= 3
prepared_by     = Hewlett-Packard Company
tester   	= Hewlett-Packard Company
test_sponsor	= Hewlett-Packard Company
hw_vendor       = Hewlett-Packard Company
hw_model000     = ProLiant DL585 G7
hw_model001 = (1.8 GHz AMD Opteron 6166 HE)

####################################################################
# Hardware information
####################################################################
hw_avail     	   = Feb-2011
hw_cpu_name        = AMD Opteron 6166 HE
hw_cpu_mhz         = 1800
hw_fpu             = Integrated
hw_nchips          = 4
hw_ncores          = 48
hw_ncoresperchip   = 12
hw_nthreadspercore = 1
hw_ncpuorder       = 2,4 chips
hw_pcache          = 64 KB I + 64 KB D on chip per core
hw_scache          = 512 KB I+D on chip per core
hw_tcache          = 12 MB I+D on chip per chip, 6 MB shared / 6 cores
hw_ocache          = None
hw_disk            = 2 x 146 GB 10 K SAS
hw_memory          = 128 GB (32 x 4 GB 2Rx4 PC3-10600R-9, ECC)
hw_other           = None
sw_file            = ext3
sw_os000           = SUSE Linux Enterprise Server 11 (x86_64) SP1,
sw_os001           = Kernel 2.6.32.12-0.7-default
sw_state           = Run level 3 (multi-user)

#####################################################################
# Notes
#####################################################################
notes_020 =The x86 Open64 Compiler Suite is only available from (and supported by) AMD at
notes_025 =http://developer.amd.com/cpu/open64

notes_submit_000 ='numactl' was used to bind copies to the cores.
notes_submit_005 =See the configuration file for details.

notes_os_000 ='ulimit -s unlimited' was used to set environment stack size
notes_os_005 ='ulimit -l 2097152'  was used to set environment locked pages in memory limit
notes_os_010 =
notes_os_015 =Set vm/nr_hugepages=21600 in /etc/sysctl.conf
notes_os_020 =mount -t hugetlbfs nodev /mnt/hugepages
# ---- End inclusion of '/cpu2006/config/AMD1002mc-rate-revC.inc'

####################################################
# Auto-configured settings based on your .inc file #
####################################################

%if '%{cores_per_socket}' eq '12'
# Config settings for MC-12 systems
% ifdef %{autopar}
   preENV_OMP_NUM_THREADS = 6
% endif #autopar
  preENV_HUGETLB_LIMIT = 450
  bind0  = numactl -m 0 --physcpubind=0
  bind1  = numactl -m 2 --physcpubind=1
  bind2  = numactl -m 4 --physcpubind=2
  bind3  = numactl -m 7 --physcpubind=3
  bind4  = numactl -m 0 --physcpubind=4
  bind5  = numactl -m 2 --physcpubind=5
  bind6  = numactl -m 4 --physcpubind=6
  bind7  = numactl -m 7 --physcpubind=7
  bind8  = numactl -m 0 --physcpubind=8
  bind9  = numactl -m 2 --physcpubind=9
  bind10 = numactl -m 4 --physcpubind=10
  bind11 = numactl -m 7 --physcpubind=11
  bind12 = numactl -m 0 --physcpubind=12
  bind13 = numactl -m 2 --physcpubind=13
  bind14 = numactl -m 4 --physcpubind=14
  bind15 = numactl -m 7 --physcpubind=15
  bind16 = numactl -m 0 --physcpubind=16
  bind17 = numactl -m 2 --physcpubind=17
  bind18 = numactl -m 4 --physcpubind=18
  bind19 = numactl -m 7 --physcpubind=19
  bind20 = numactl -m 0 --physcpubind=20
  bind21 = numactl -m 2 --physcpubind=21
  bind22 = numactl -m 4 --physcpubind=22
  bind23 = numactl -m 7 --physcpubind=23
  bind24 = numactl -m 1 --physcpubind=24
  bind25 = numactl -m 3 --physcpubind=25
  bind26 = numactl -m 5 --physcpubind=26
  bind27 = numactl -m 6 --physcpubind=27
  bind28 = numactl -m 1 --physcpubind=28
  bind29 = numactl -m 3 --physcpubind=29
  bind30 = numactl -m 5 --physcpubind=30
  bind31 = numactl -m 6 --physcpubind=31
  bind32 = numactl -m 1 --physcpubind=32
  bind33 = numactl -m 3 --physcpubind=33
  bind34 = numactl -m 5 --physcpubind=34
  bind35 = numactl -m 6 --physcpubind=35
  bind36 = numactl -m 1 --physcpubind=36
  bind37 = numactl -m 3 --physcpubind=37
  bind38 = numactl -m 5 --physcpubind=38
  bind39 = numactl -m 6 --physcpubind=39
  bind40 = numactl -m 1 --physcpubind=40
  bind41 = numactl -m 3 --physcpubind=41
  bind42 = numactl -m 5 --physcpubind=42
  bind43 = numactl -m 6 --physcpubind=43
  bind44 = numactl -m 1 --physcpubind=44
  bind45 = numactl -m 3 --physcpubind=45
  bind46 = numactl -m 5 --physcpubind=46
  bind47 = numactl -m 6 --physcpubind=47

% if '%{num_sockets}' eq '2'
#   Config settings for 2P MC-12 system
    copies = 24
%   define num_nodes 4

% elif '%{num_sockets}' eq '4'
#   Config settings for 4P MC-12 system
    copies = 48
%   define num_nodes 8

% else #num_sockets
%   error Please define "num_sockets" to either '2' or '4' in %{inc_file_name}.  This error was generated
% endif #num_sockets

%elif '%{cores_per_socket}' eq '8'
# Config settings for MC-8 systems
% ifdef %{autopar}
   preENV_OMP_NUM_THREADS = 4
% endif #autopar
  preENV_HUGETLB_LIMIT = 896
  bind0  = numactl -m 0 --physcpubind=0
  bind1  = numactl -m 2 --physcpubind=1
  bind2  = numactl -m 4 --physcpubind=2
  bind3  = numactl -m 7 --physcpubind=3
  bind4  = numactl -m 0 --physcpubind=4
  bind5  = numactl -m 2 --physcpubind=5
  bind6  = numactl -m 4 --physcpubind=6
  bind7  = numactl -m 7 --physcpubind=7
  bind8  = numactl -m 0 --physcpubind=8
  bind9  = numactl -m 2 --physcpubind=9
  bind10 = numactl -m 4 --physcpubind=10
  bind11 = numactl -m 7 --physcpubind=11
  bind12 = numactl -m 0 --physcpubind=12
  bind13 = numactl -m 2 --physcpubind=13
  bind14 = numactl -m 4 --physcpubind=14
  bind15 = numactl -m 7 --physcpubind=15
  bind16 = numactl -m 1 --physcpubind=16
  bind17 = numactl -m 3 --physcpubind=17
  bind18 = numactl -m 5 --physcpubind=18
  bind19 = numactl -m 6 --physcpubind=19
  bind20 = numactl -m 1 --physcpubind=20
  bind21 = numactl -m 3 --physcpubind=21
  bind22 = numactl -m 5 --physcpubind=22
  bind23 = numactl -m 6 --physcpubind=23
  bind24 = numactl -m 1 --physcpubind=24
  bind25 = numactl -m 3 --physcpubind=25
  bind26 = numactl -m 5 --physcpubind=26
  bind27 = numactl -m 6 --physcpubind=27
  bind28 = numactl -m 1 --physcpubind=28
  bind29 = numactl -m 3 --physcpubind=29
  bind30 = numactl -m 5 --physcpubind=30
  bind31 = numactl -m 6 --physcpubind=31

% if '%{num_sockets}' eq '2'
#   Config settings for 2P MC-8 system
    copies = 16
%   define num_nodes 4

% elif '%{num_sockets}' eq '4'
#   Config settings for 4P MC-8 system
    copies = 32
%   define num_nodes 8

% else #num_sockets
%   error Please define "num_sockets" to either '2' or '4' in %{inc_file_name}.  This error was generated
% endif #num_sockets

%else #cores_per_socket
% error Please define "cores_per_socket" to either '8' or '12' in %{inc_file_name}.  This error was generated
%endif #cores_per_socket

################################
# End auto-configured settings #
################################

submit = echo "$command" > run.sh ; $BIND bash run.sh

############################ Software Info   ############################
fp=default=default=default:
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 32/64-bit
sw_avail        = July-2010
sw_compiler     = x86 Open64 4.2.4 Compiler Suite (from AMD)
sw_other1       = binutils 2.18

int=default=default=default:
sw_base_ptrsize = 32/64-bit
sw_peak_ptrsize = 32/64-bit
sw_avail        = Aug-2010
sw_compiler     = x86 Open64 4.2.4 Compiler Suite (from AMD)
sw_other        = SmartHeap 8.1 32-bit Library for Linux

default=default=default=default:

#####################################################################
# Compiler selection
#
#

CC  = opencc -march=barcelona -mso
CXX = openCC -march=barcelona -mso
FC  = openf95 -march=barcelona -mso

#####################################################################
# Portability for default 64-bit code generation
#####################################################################

default=default=default:
PORTABILITY = -DSPEC_CPU_LP64

#####################################################################
# INT Portability
#####################################################################

400.perlbench=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

403.gcc=peak=default:
PORTABILITY =

429.mcf=peak=default:
PORTABILITY =

462.libquantum=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX

471.omnetpp=default=default:
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

473.astar=default=default:
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

483.xalancbmk=default=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

#################################################################
#                                                               #
#          SPECint Tuning & Notes                               #
#                                                               #
#################################################################

int=base:
COPTIMIZE = -Ofast -CG:local_sched_alg=1 -INLINE:aggressive=on -IPA:plimit=8000:small_pu=100 -HP:bdt=2m:heap=2m
CXXOPTIMIZE = -Ofast -m32 -INLINE:aggressive=on -CG:cmp_peep=on
EXTRA_CXXLIBS = -L$(SMARTHEAP_DIR) -lsmartheap

#####################################################################
# INT Peak Tuning
#####################################################################

int=peak=default:
COPTIMIZE = -Ofast -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m
CXXOPTIMIZE = -Ofast -m32 -HP:bdt=2m:heap=2m
PASS1_CFLAGS = -fb_create fbdata
PASS1_CXXFLAGS = -fb_create fbdata
PASS1_LDFLAGS = -fb_create fbdata
PASS2_CFLAGS = -fb_opt fbdata
PASS2_CXXFLAGS = -fb_opt fbdata
PASS2_LDFLAGS = -fb_opt fbdata

400.perlbench=peak=default:
COPTIMIZE = -Ofast -IPA:plimit=20000 -LNO:opt=0 -OPT:unroll_times_max=8:unroll_size=256:unroll_level=2:keep_ext=on -WOPT:if_conv=0 -CG:local_sched_alg=1:unroll_fb_req=on -HP:bdt=2m:heap=2m

401.bzip2=peak=default:
COPTIMIZE = -O3 -OPT:alias=disjoint:goto=off -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m

403.gcc=peak=default:
COPTIMIZE = -Ofast -LNO:trip_count=256:prefetch_ahead=10 -CG:cmp_peep=on -m32 -HP:bdt=2m:heap=2m -GRA:unspill=on -IPA:small_pu=200

429.mcf=peak=default:
COPTIMIZE = -O3 -ipa -INLINE:aggressive=on -CG:gcm=off -GRA:prioritize_by_density=on -m32 -HP:bdt=2m:heap=2m
feedback = 0

445.gobmk=peak=default:
COPTIMIZE = -O3 -OPT:alias=restrict:unroll_times_max=8:unroll_size=256:unroll_level=2:keep_ext=on -ipa -IPA:plimit=750:min_hotness=300:pu_reorder=1 -LNO:prefetch=1:ignore_feedback=off -CG:p2align=on:unroll_fb_req=on -HP:bdt=2m:heap=2m

456.hmmer=peak=default:
COPTIMIZE = -Ofast -LNO:prefetch=0 -OPT:alias=disjoint:unroll_times_max=8:unroll_size=256:unroll_level=2:keep_ext=on -CG:local_sched_alg=1:cflow=0:push_pop_int_saved_regs=off:cmp_peep=on -HP:bdt=2m:heap=2m

458.sjeng=peak=default:
COPTIMIZE = -O3 -ipa -LNO:ignore_feedback=off:full_unroll=10:fusion=0:fission=2 -IPA:pu_reorder=2 -CG:ptr_load_use=0 -OPT:unroll_times_max=8 -INLINE:aggressive=on

462.libquantum=peak=default:
COPTIMIZE = -Ofast -LNO:pf2=0 -CG:gcm=off:use_prefetchnta=on:cmp_peep=on -WOPT:aggstr=0 -HP:bdt=2m:heap=2m -OPT:alias=disjoint -INLINE:aggressive=on -IPA:space=1000:plimit=20000
feedback = 0

464.h264ref=peak=default:
COPTIMIZE = -O3 -IPA:plimit=20000 -OPT:alias=disjoint -LNO:prefetch=0 -CG:ptr_load_use=0:push_pop_int_saved_regs=off

471.omnetpp=peak=default:
basepeak = 1

473.astar=peak=default:
CXXOPTIMIZE = -Ofast -TENV:frame_pointer=off -WOPT:if_conv=0 -GRA:optimize_boundary=on -OPT:alias=disjoint -INLINE:aggressive=on -IPA:small_pu=3000:plimit=3000 -m32 -HP:bdt=2m:heap=2m

483.xalancbmk=peak=default:
CXXOPTIMIZE = -Ofast -INLINE:aggressive=on -m32 -CG:cmp_peep=on -GRA:unspill=on -TENV:frame_pointer=off -fno-emit-exceptions
EXTRA_CXXLIBS = -L$(SMARTHEAP_DIR) -lsmartheap
feedback = 0

#####################################################################
# FP Portability
#####################################################################

436.cactusADM=default=default:
FPORTABILITY = -fno-second-underscore

447.dealII=peak=default:
PORTABILITY =

450.soplex=peak=default:
PORTABILITY =

481.wrf=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG
FPORTABILITY = -fno-second-underscore

#################################################################
#                                                               #
#                        SPECfp Tuning                          #
#                                                               #
#################################################################

fp=base:
COPTIMIZE = -Ofast -OPT:malloc_alg=1 -HP:bdt=2m
CXXOPTIMIZE = -Ofast -static -INLINE:aggressive=on -OPT:malloc_alg=1 -HP:bdt=2m
FOPTIMIZE = -Ofast -HP

#####################################################################
# FP Peak Tuning
#####################################################################

fp=peak=default:
COPTIMIZE = -Ofast -HP:bdt=2m:heap=2m
CXXOPTIMIZE = -Ofast -INLINE:aggressive=on -HP:bdt=2m:heap=2m
FOPTIMIZE = -Ofast -HP:bdt=2m:heap=2m
PASS1_CFLAGS = -fb_create fbdata
PASS2_CFLAGS = -fb_opt fbdata
PASS1_CXXFLAGS = -fb_create fbdata
PASS2_CXXFLAGS = -fb_opt fbdata
PASS1_FFLAGS = -fb_create fbdata
PASS2_FFLAGS = -fb_opt fbdata
PASS1_LDFLAGS = -fb_create fbdata
PASS2_LDFLAGS = -fb_opt fbdata

410.bwaves=peak=default:
FOPTIMIZE = -O3 -OPT:Ofast:treeheight=on -LNO:blocking=off:prefetch_ahead=5:ignore_feedback=off -WOPT:aggstr=0 -HP:bdt=2m:heap=2m -CG:cmp_peep=on
feedback = 0

416.gamess=peak=default:
FOPTIMIZE = -O3 -LNO:fu=6:blocking=0:prefetch=0 -OPT:Ofast:ro=3:unroll_size=256 -HP:bdt=2m:heap=2m

433.milc=peak=default:
COPTIMIZE = -Ofast -CG:movnti=1:local_sched_alg=1 -CG:locs_shallow_depth=1 -HP:bdt=2m:heap=2m -LNO:prefetch=3
feedback = 0

434.zeusmp=peak=default:
FOPTIMIZE = -Ofast -LNO:blocking=off:interchange=off -OPT:treeheight=on:unroll_size=256 -CG:cmp_peep=on -GRA:prioritize_by_density=on -HP
feedback = 0

435.gromacs=peak=default:
FOPTIMIZE = -Ofast -OPT:rsqrt=2 -HP:bdt=2m:heap=2m
COPTIMIZE = $(FOPTIMIZE)
feedback = 0

436.cactusADM=peak=default:
FOPTIMIZE = -Ofast -apo -LNO:prefetch_ahead=1 -HP:bdt=2m:heap=2m -LANG:heap_allocation_threshold=100
COPTIMIZE = $(FOPTIMIZE)
copies = %{num_nodes}

%if '%{cores_per_socket}' eq '12'
# Settings for MC-12 systems

  bind0 = numactl -m 0 --physcpubind=0,4,8,12,16,20
  bind1 = numactl -m 1 --physcpubind=24,28,32,36,40,44
  bind2 = numactl -m 2 --physcpubind=1,5,9,13,17,21
  bind3 = numactl -m 3 --physcpubind=25,29,33,37,41,45
  bind4 = numactl -m 4 --physcpubind=2,6,10,14,18,22
  bind5 = numactl -m 5 --physcpubind=26,30,34,38,42,46
  bind6 = numactl -m 6 --physcpubind=27,31,35,39,43,47
  bind7 = numactl -m 7 --physcpubind=3,7,11,15,19,23

%elif '%{cores_per_socket}' eq '8'
# Settings for MC-8 systems
  bind0 = numactl -m 0 --physcpubind=0,4,8,12
  bind1 = numactl -m 1 --physcpubind=16,20,24,28
  bind2 = numactl -m 2 --physcpubind=1,5,9,13
  bind3 = numactl -m 3 --physcpubind=17,21,25,29
  bind4 = numactl -m 4 --physcpubind=2,6,10,14
  bind5 = numactl -m 5 --physcpubind=18,22,26,30
  bind6 = numactl -m 6 --physcpubind=19,23,27,31
  bind7 = numactl -m 7 --physcpubind=3,7,11,15
%else #cores_per_socket
% error Please define "cores_per_socket" to either '8' or '12'.
%endif #cores_per_socket

437.leslie3d=peak=default:
FOPTIMIZE = -Ofast -HP:bdt=2m:heap=2m
feedback = 0

444.namd=peak=default:
CXXOPTIMIZE = -Ofast -LNO:ignore_feedback=off -CG:local_sched_alg=2:load_exe=0:compute_to=on -OPT:unroll_size=256 -fno-exceptions -HP:bdt=2m:heap=2m

447.dealII=peak=default:
CXXOPTIMIZE = -Ofast -static -INLINE:aggressive=on -LNO:opt=0 -fno-emit-exceptions -m32 -OPT:unroll_times_max=8:unroll_size=256:unroll_level=2 -HP:bdt=2m:heap=2m -GRA:unspill=on -CG:cmp_peep=on -TENV:frame_pointer=off
feedback = 0

450.soplex=peak=default:
CXXOPTIMIZE = -O3 -INLINE:aggressive=on -OPT:IEEE_arith=3:IEEE_NaN_Inf=off:fold_unsigned_relops=on:malloc_alg=1 -CG:load_exe=0 -fno-exceptions -m32 -HP:bdt=2m

453.povray=peak=default:
CXXOPTIMIZE = -Ofast  -INLINE:aggressive=on

454.calculix=peak=default:
FOPTIMIZE = -Ofast -CG:load_exe=0:ptr_load_use=0:local_sched_alg=2:compute_to=on -LNO:prefetch_ahead=30 -WOPT:unroll=2 -GRA:optimize_boundary=on -HP:bdt=2m:heap=2m
COPTIMIZE = $(FOPTIMIZE)
feedback = 0

459.GemsFDTD=peak=default:
FOPTIMIZE = -Ofast -LNO:fission=2:prefetch_ahead=1 -CG:load_exe=0:local_sched_alg=1 -HP
feedback = 0

465.tonto=peak=default:
FOPTIMIZE = -Ofast -OPT:alias=no_f90_pointer_alias -LNO:blocking=off -CG:load_exe=1 -IPA:plimit=525 -HP
feedback = 0

470.lbm=peak=default:
basepeak = 1

481.wrf=peak=default:
FOPTIMIZE = -Ofast -LNO:blocking=off:prefetch_ahead=10 -LANG:copyinout=off -IPA:callee_limit=5000 -GRA:prioritize_by_density=on -m3dnow -HP
COPTIMIZE = $(FOPTIMIZE)
feedback = 0

482.sphinx3=peak=default:
COPTIMIZE = -Ofast -OPT:malloc_alg=2 -CG:sse_cse_regs=0:locs_shallow_depth=1:cmp_peep=on:local_sched_alg=1 -INLINE:aggressive=on




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

462.libquantum:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
flagsurl001 = http://www.spec.org/cpu2006/flags/x86-open64-424-flags-rate-revC.20100901.xml
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =HUGETLB_LIMIT = "450"
notes_010 =LD_LIBRARY_PATH = "/cpu2006/amd1002mc-rate-libs-revC/64:/cpu2006/amd1002mc-rate-libs-revC/32"
notes_015 =
notes_plat_000 =BIOS Configuration:
notes_plat_005 =  HP Power Profile set to Maximum Performance
notes_plat_010 =  Thermal Configuration set to Increased Cooling