SPEC(R) CFP2006 Summary Fujitsu PRIMERGY TX140 S1p, Intel Pentium G550, 2.60 GHz Fri May 11 17:27:45 2012 CPU2006 License: 19 Test date: May-2012 Test sponsor: Fujitsu Hardware availability: Jun-2012 Tested by: Fujitsu Software availability: Feb-2012 --------------------------------------------------------------------------- SPEC has determined that this result is not in compliance with the SPEC CPU2006 run and reporting rules. Specifically, the submitter reported that the result does not meet the 3 month availability requirement in the SPEC CPU2006 run rules, because the tested processor was not supported on this platform within three months of publication. --------------------------------------------------------------------------- Base Base Base Peak Peak Peak Benchmarks Copies Run Time Rate Copies Run Time Rate -------------- ------ --------- --------- ------ --------- --------- 410.bwaves 2 NC NC 2 NC NC 416.gamess 2 NC NC 2 NC NC 433.milc 2 NC NC 2 NC NC 434.zeusmp 2 NC NC 2 NC NC 435.gromacs 2 NC NC 2 NC NC 436.cactusADM 2 NC NC 2 NC NC 437.leslie3d 2 NC NC 2 NC NC 444.namd 2 NC NC 2 NC NC 447.dealII 2 NC NC 2 NC NC 450.soplex 2 NC NC 2 NC NC 453.povray 2 NC NC 2 NC NC 454.calculix 2 NC NC 2 NC NC 459.GemsFDTD 2 NC NC 2 NC NC 465.tonto 2 NC NC 2 NC NC 470.lbm 2 NC NC 2 NC NC 481.wrf 2 NC NC 2 NC NC 482.sphinx3 2 NC NC 2 NC NC SPECfp(R)_rate_base2006 NC SPECfp_rate2006 NC HARDWARE -------- CPU Name: Intel Celeron G550 CPU Characteristics: CPU MHz: 2600 FPU: Integrated CPU(s) enabled: 2 cores, 1 chip, 2 cores/chip CPU(s) orderable: 1 chip Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core L3 Cache: 2 MB I+D on chip per chip Other Cache: None Memory: 16 GB (2 x 8 GB 2Rx8 PC3-12800E-11, ECC, running at 1067 MHz and CL7) Disk Subsystem: 1 x SATA, 500 GB, 7200 RPM Other Hardware: None SOFTWARE -------- Operating System: Red Hat Enterprise Linux Server release 6.2 (Santiago) 2.6.32-220.el6.x86_64 Compiler: C/C++: Version 12.1.0.293 of Intel C++ Studio XE for Linux; Fortran: Version 12.1.0.293 of Intel Fortran Studio XE for Linux Auto Parallel: No File System: ext4 System State: Run level 3 (multi-user) Base Pointers: 32/64-bit Peak Pointers: 32/64-bit Other Software: None Submit Notes ------------ The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file. Operating System Notes ---------------------- Stack size set to unlimited using "ulimit -s unlimited" Transparent Huge Pages disabled with: runspec command invoked through numactl i.e.: numactl --interleave=all runspec General Notes ------------- Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64" Binaries compiled on a system with 1x E3-1270v2 CPU + 32 GB memory using RHEL6.2 For information about Fujitsu please visit: http://www.fujitsu.com Base Compiler Invocation ------------------------ C benchmarks: icc -m64 C++ benchmarks: icpc -m64 Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Base Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 450.soplex: -DSPEC_CPU_LP64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 482.sphinx3: -DSPEC_CPU_LP64 Base Optimization Flags ----------------------- C benchmarks: -xSSE4.2 -ipo -O3 -no-prec-div -static -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 C++ benchmarks: -xSSE4.2 -ipo -O3 -no-prec-div -static -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 Fortran benchmarks: -xSSE4.2 -ipo -O3 -no-prec-div -static -opt-prefetch Benchmarks using both Fortran and C: -xSSE4.2 -ipo -O3 -no-prec-div -static -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 Peak Compiler Invocation ------------------------ C benchmarks (except as noted below): icc -m64 482.sphinx3: icc -m32 C++ benchmarks (except as noted below): icpc -m64 450.soplex: icpc -m32 Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Peak Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX Peak Optimization Flags ----------------------- C benchmarks: 433.milc: basepeak = yes 470.lbm: basepeak = yes 482.sphinx3: -xSSE4.2 -ipo -O3 -no-prec-div -opt-mem-layout-trans=3 -unroll2 C++ benchmarks: 444.namd: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -fno-alias -auto-ilp32 447.dealII: basepeak = yes 450.soplex: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -opt-malloc-options=3 453.povray: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -unroll4 -ansi-alias Fortran benchmarks: 410.bwaves: basepeak = yes 416.gamess: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -inline-level=0 -scalar-rep- -static 434.zeusmp: basepeak = yes 437.leslie3d: basepeak = yes 459.GemsFDTD: basepeak = yes 465.tonto: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto -inline-calloc -opt-malloc-options=3 Benchmarks using both Fortran and C: 435.gromacs: basepeak = yes 436.cactusADM: basepeak = yes 454.calculix: basepeak = yes 481.wrf: -xSSE4.2 -ipo -O3 -no-prec-div -static -auto-ilp32 The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.html http://www.spec.org/cpu2006/flags/Fujitsu-Platform.20120320.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.xml http://www.spec.org/cpu2006/flags/Fujitsu-Platform.20120320.xml SPEC and SPECfp are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2006-2015 Standard Performance Evaluation Corporation Tested with SPEC CPU2006 v1.2. Report generated on Fri Mar 20 12:05:58 2015 by CPU2006 ASCII formatter v6932. Originally published on 19 June 2012.