SPEC CPU®2017 Integer Rate Result

Copyright 2017-2024 Standard Performance Evaluation Corporation

Bull SAS

BullSequana SH160 (Intel Xeon Platinum 8490H)

SPECrate®2017_int_base = 541000

SPECrate®2017_int_peak = 549000

CPU2017 License: 20 Test Date: Aug-2024
Test Sponsor: Bull SAS Hardware Availability: Jun-2024
Tested by: Bull SAS Software Availability: Dec-2023

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon Platinum 8490H
  Max MHz: 3500
  Nominal: 1900
Enabled: 720 cores, 12 chips, 2 threads/core
Orderable: 12,16 chips
Cache L1: 32 KB I + 48 KB D on chip per core
  L2: 2 MB I+D on chip per core
  L3: 112.5 MB I+D on chip per chip
  Other: None
Memory: 6 TB (96 x 64 GB 2Rx4 PC5-4800B-R)
Storage: 1 x 15.4 TB NVME RAID SSD
1 x 960 GB NVME SSD
Other: CPU Cooling: Air
Software
OS: Red Hat Enterprise Linux 9.2 (Plow)
5.14.0-284.30.1.el9_2.x86_64
Compiler: C/C++: Version 2023.2.3 of Intel oneAPI DPC++/C++
Compiler for Linux;
Fortran: Version 2023.2.3 of Intel Fortran
Compiler for Linux;
Parallel: No
Firmware: Version BIOS_SAR121.79.00.007 released Jun-2024
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: None
Power Management: BIOS and OS set to prefer performance at the cost
of additional power usage.

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
SPECrate®2017_int_base 541000
SPECrate®2017_int_peak 549000
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
500.perlbench_r 1440 526 4360 526 4360 525 4360 1440 478 4790 479 4790 479 4780
502.gcc_r 1440 509 4000 511 3990 510 4000 1440 509 4000 511 3990 510 4000
505.mcf_r 1440 284 8190 284 8190 284 8180 1440 284 8190 284 8190 284 8180
520.omnetpp_r 1440 610 3100 610 3100 612 3090 1440 610 3100 610 3100 612 3090
523.xalancbmk_r 1440 196 7770 196 7770 195 7790 1440 196 7770 196 7770 195 7790
525.x264_r 1440 219 11500 217 11600 219 11500 1440 204 12400 205 12300 204 12300
531.deepsjeng_r 1440 398 4140 398 4140 398 4140 1440 398 4140 398 4140 398 4140
541.leela_r 1440 580 4110 579 4120 578 4130 1440 580 4110 579 4120 578 4130
548.exchange2_r 1440 319 11800 319 11800 319 11800 1440 319 11800 319 11800 319 11800
557.xz_r 1440 583 2670 583 2670 582 2670 1440 583 2670 583 2670 582 2670

Submit Notes

 The numactl mechanism was used to bind copies to processors. The config file option 'submit'
 was used to generate numactl commands to bind each copy to a specific processor.
 For details, please see the config file.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"
 Not using the LTS version of the kernel

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/mnt/spec/lib/intel64:/mnt/spec/lib/ia32:/mnt/spec/je5.0.1-32"
MALLOC_CONF = "retain:true"

General Notes

 Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM
 memory using Red Hat Enterprise Linux 8.4
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches
 runcpu command invoked through numactl i.e.:
 numactl --interleave=all runcpu <etc>

 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
 is mitigated in the system as tested and documented.

Platform Notes

BIOS Configuration:
DCU Streamer Prefetcher = Disabled
Power Performance Tuning = BIOS Controls EPB
Energy Perf Bias CFG mode = Performance0
Enable dIout tuning = enabled
LLC Dead Line Alloc = disabled
Package C State = C0/C1 state
Patrol Scrub = Disabled
BMC Configuration:
FansFullSpeed = True

 Sysinfo program /mnt/spec/bin/sysinfo
 Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197
 running on mesca516s-02 Tue Aug 20 10:50:52 2024

 SUT (System Under Test) info as seen by some common utilities.

 ------------------------------------------------------------
 Table of contents
 ------------------------------------------------------------
  1. uname -a
  2. w
  3. Username
  4. ulimit -a
  5. sysinfo process ancestry
  6. /proc/cpuinfo
  7. lscpu
  8. numactl --hardware
  9. /proc/meminfo
 10. who -r
 11. Systemd service manager version: systemd 252 (252-14.el9_2.3)
 12. Failed units, from systemctl list-units --state=failed
 13. Services, from systemctl list-unit-files
 14. Linux kernel boot-time arguments, from /proc/cmdline
 15. cpupower frequency-info
 16. tuned-adm active
 17. sysctl
 18. /sys/kernel/mm/transparent_hugepage
 19. /sys/kernel/mm/transparent_hugepage/khugepaged
 20. OS release
 21. Disk information
 22. /sys/devices/virtual/dmi/id
 23. dmidecode
 24. BIOS
 ------------------------------------------------------------

 ------------------------------------------------------------
 1. uname -a
   Linux mesca516s-02 5.14.0-284.30.1.el9_2.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Aug 25 09:13:12 EDT 2023 x86_64
   x86_64 x86_64 GNU/Linux

 ------------------------------------------------------------
 2. w
    10:50:52 up 2 days, 20:10,  2 users,  load average: 0.68, 110.38, 415.38
   USER     TTY        LOGIN@   IDLE   JCPU   PCPU WHAT
   root     pts/0     09:40    1:05m  0.01s  0.01s -bash
   root     pts/1     10:07   60.00s  4.99s  3.33s top

 ------------------------------------------------------------
 3. Username
   From environment variable $USER:  root

 ------------------------------------------------------------
 4. ulimit -a
   real-time non-blocking time  (microseconds, -R) unlimited
   core file size              (blocks, -c) 0
   data seg size               (kbytes, -d) unlimited
   scheduling priority                 (-e) 0
   file size                   (blocks, -f) unlimited
   pending signals                     (-i) 24766553
   max locked memory           (kbytes, -l) 8192
   max memory size             (kbytes, -m) unlimited
   open files                          (-n) 40000
   pipe size                (512 bytes, -p) 8
   POSIX message queues         (bytes, -q) 819200
   real-time priority                  (-r) 0
   stack size                  (kbytes, -s) unlimited
   cpu time                   (seconds, -t) unlimited
   max user processes                  (-u) 24766553
   virtual memory              (kbytes, -v) unlimited
   file locks                          (-x) unlimited

 ------------------------------------------------------------
 5. sysinfo process ancestry
  /usr/lib/systemd/systemd rhgb --switched-root --system --deserialize 31
  sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
  sshd: root [priv]
  sshd: root@pts/1
  -bash
  bash $SPEC/run_one_rate.sh 3 intrate
  runcpu --copies 1440 --configfile mesca5_16S --define smt-on --define cores=720 --define
    invoke_with_interleave --define drop_caches --iterations=3 --reportable --size=ref --tune all -o all
    intrate
  runcpu --copies 1440 --configfile mesca5_16S --define smt-on --define cores=720 --define
    invoke_with_interleave --define drop_caches --iterations 3 --reportable --size ref --tune all
    --output_format all --nopower --runmode rate --tune base:peak --size refrate intrate --nopreenv
    --note-preenv --logfile $SPEC/tmp/CPU2017.070/templogs/preenv.intrate.070.0.log --lognum 070.0
    --from_runcpu 2
  specperl $SPEC/bin/sysinfo
 $SPEC = /mnt/spec

 ------------------------------------------------------------
 6. /proc/cpuinfo
     model name      : Intel(R) Xeon(R) Platinum 8490H
     vendor_id       : GenuineIntel
     cpu family      : 6
     model           : 143
     stepping        : 8
     microcode       : 0x2b0005c0
     bugs            : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb
     cpu cores       : 60
     siblings        : 120
     12 physical ids (chips)
     1440 processors (hardware threads)
     physical id 0: core ids 0-59
     physical id 1: core ids 0-59
     physical id 2: core ids 0-59
     physical id 3: core ids 0-59
     physical id 4: core ids 0-59
     physical id 5: core ids 0-59
     physical id 6: core ids 0-59
     physical id 7: core ids 0-59
     physical id 8: core ids 0-59
     physical id 9: core ids 0-59
     physical id 10: core ids 0-59
     physical id 11: core ids 0-59
     physical id 0: apicids 0-119
     physical id 1: apicids 128-247
     physical id 2: apicids 256-375
     physical id 3: apicids 384-503
     physical id 4: apicids 512-631
     physical id 5: apicids 640-759
     physical id 6: apicids 768-887
     physical id 7: apicids 896-1015
     physical id 8: apicids 1024-1143
     physical id 9: apicids 1152-1271
     physical id 10: apicids 1280-1399
     physical id 11: apicids 1408-1527
   Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for
   virtualized systems.  Use the above data carefully.

 ------------------------------------------------------------
 7. lscpu

 From lscpu from util-linux 2.37.4:
   Architecture:                    x86_64
   CPU op-mode(s):                  32-bit, 64-bit
   Address sizes:                   46 bits physical, 57 bits virtual
   Byte Order:                      Little Endian
   CPU(s):                          1440
   On-line CPU(s) list:             0-1439
   Vendor ID:                       GenuineIntel
   BIOS Vendor ID:                  Intel(R) Corporation
   Model name:                      Intel(R) Xeon(R) Platinum 8490H
   BIOS Model name:                 Intel(R) Xeon(R) Platinum 8490H
   CPU family:                      6
   Model:                           143
   Thread(s) per core:              2
   Core(s) per socket:              60
   Socket(s):                       12
   Stepping:                        8
   CPU max MHz:                     3500.0000
   CPU min MHz:                     800.0000
   BogoMIPS:                        3800.00
   Flags:                           fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
                                    clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
                                    lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
                                    nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor
                                    ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1
                                    sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand
                                    lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cat_l2 cdp_l3
                                    invpcid_single intel_ppin cdp_l2 ssbd mba ibrs ibpb stibp ibrs_enhanced
                                    tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2
                                    smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap
                                    avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl
                                    xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
                                    cqm_mbm_local split_lock_detect avx_vnni avx512_bf16 wbnoinvd dtherm ida
                                    arat pln pts hwp hwp_act_window hwp_epp hwp_pkg_req avx512vbmi umip pku
                                    ospke waitpkg avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg
                                    tme avx512_vpopcntdq la57 rdpid bus_lock_detect cldemote movdiri movdir64b
                                    enqcmd fsrm md_clear serialize tsxldtrk pconfig arch_lbr ibt amx_bf16
                                    avx512_fp16 amx_tile amx_int8 flush_l1d arch_capabilities
   Virtualization:                  VT-x
   L1d cache:                       33.8 MiB (720 instances)
   L1i cache:                       22.5 MiB (720 instances)
   L2 cache:                        1.4 GiB (720 instances)
   L3 cache:                        1.3 GiB (12 instances)
   NUMA node(s):                    12
   NUMA node0 CPU(s):               0-59,720-779
   NUMA node1 CPU(s):               60-119,780-839
   NUMA node2 CPU(s):               120-179,840-899
   NUMA node3 CPU(s):               180-239,900-959
   NUMA node4 CPU(s):               240-299,960-1019
   NUMA node5 CPU(s):               300-359,1020-1079
   NUMA node6 CPU(s):               360-419,1080-1139
   NUMA node7 CPU(s):               420-479,1140-1199
   NUMA node8 CPU(s):               480-539,1200-1259
   NUMA node9 CPU(s):               540-599,1260-1319
   NUMA node10 CPU(s):              600-659,1320-1379
   NUMA node11 CPU(s):              660-719,1380-1439
   Vulnerability Itlb multihit:     Not affected
   Vulnerability L1tf:              Not affected
   Vulnerability Mds:               Not affected
   Vulnerability Meltdown:          Not affected
   Vulnerability Mmio stale data:   Not affected
   Vulnerability Retbleed:          Not affected
   Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
   Vulnerability Spectre v1:        Mitigation; usercopy/swapgs barriers and __user pointer sanitization
   Vulnerability Spectre v2:        Mitigation; Enhanced IBRS, IBPB conditional, RSB filling, PBRSB-eIBRS SW
                                    sequence
   Vulnerability Srbds:             Not affected
   Vulnerability Tsx async abort:   Not affected

 From lscpu --cache:
      NAME ONE-SIZE ALL-SIZE WAYS TYPE        LEVEL   SETS PHY-LINE COHERENCY-SIZE
      L1d       48K    33.8M   12 Data            1     64        1             64
      L1i       32K    22.5M    8 Instruction     1     64        1             64
      L2         2M     1.4G   16 Unified         2   2048        1             64
      L3     112.5M     1.3G   15 Unified         3 122880        1             64

 ------------------------------------------------------------
 8. numactl --hardware
 NOTE: a numactl 'node' might or might not correspond to a physical chip.
   available: 12 nodes (0-11)
   node 0 cpus: 0-59,720-779
   node 0 size: 515027 MB
   node 0 free: 512240 MB
   node 1 cpus: 60-119,780-839
   node 1 size: 516018 MB
   node 1 free: 514094 MB
   node 2 cpus: 120-179,840-899
   node 2 size: 516069 MB
   node 2 free: 514263 MB
   node 3 cpus: 180-239,900-959
   node 3 size: 516069 MB
   node 3 free: 514152 MB
   node 4 cpus: 240-299,960-1019
   node 4 size: 516069 MB
   node 4 free: 513933 MB
   node 5 cpus: 300-359,1020-1079
   node 5 size: 516069 MB
   node 5 free: 514101 MB
   node 6 cpus: 360-419,1080-1139
   node 6 size: 516069 MB
   node 6 free: 513805 MB
   node 7 cpus: 420-479,1140-1199
   node 7 size: 516069 MB
   node 7 free: 514104 MB
   node 8 cpus: 480-539,1200-1259
   node 8 size: 516069 MB
   node 8 free: 514296 MB
   node 9 cpus: 540-599,1260-1319
   node 9 size: 516069 MB
   node 9 free: 514332 MB
   node 10 cpus: 600-659,1320-1379
   node 10 size: 516069 MB
   node 10 free: 514264 MB
   node 11 cpus: 660-719,1380-1439
   node 11 size: 516029 MB
   node 11 free: 514188 MB
   node distances:
   node   0   1   2   3   4   5   6   7   8   9  10  11
     0:  10  21  21  21  41  41  41  41  41  41  41  41
     1:  21  10  21  21  41  41  41  41  41  41  41  41
     2:  21  21  10  21  41  41  41  41  41  41  41  41
     3:  21  21  21  10  41  41  41  41  41  41  41  41
     4:  41  41  41  41  10  21  21  21  41  41  41  41
     5:  41  41  41  41  21  10  21  21  41  41  41  41
     6:  41  41  41  41  21  21  10  21  41  41  41  41
     7:  41  41  41  41  21  21  21  10  41  41  41  41
     8:  41  41  41  41  41  41  41  41  10  21  21  21
     9:  41  41  41  41  41  41  41  41  21  10  21  21
    10:  41  41  41  41  41  41  41  41  21  21  10  21
    11:  41  41  41  41  41  41  41  41  21  21  21  10

 ------------------------------------------------------------
 9. /proc/meminfo
    MemTotal:       6340303880 kB

 ------------------------------------------------------------
 10. who -r
   run-level 3 Aug 17 14:44

 ------------------------------------------------------------
 11. Systemd service manager version: systemd 252 (252-14.el9_2.3)
   Default Target  Status
   multi-user      degraded

 ------------------------------------------------------------
 12. Failed units, from systemctl list-units --state=failed
     UNIT                               LOAD   ACTIVE SUB    DESCRIPTION
   * NetworkManager-wait-online.service loaded failed failed Network Manager Wait Online

 ------------------------------------------------------------
 13. Services, from systemctl list-unit-files
   STATE            UNIT FILES
   enabled          ModemManager NetworkManager NetworkManager-dispatcher NetworkManager-wait-online
                    accounts-daemon atd auditd avahi-daemon bluetooth chronyd crond cups dbus-broker firewalld
                    gdm getty@ insights-client-boot irqbalance iscsi iscsi-onboot kdump libstoragemgmt
                    low-memory-monitor lvm2-monitor mcelog mdmonitor microcode multipathd nis-domainname
                    nvmefc-boot-connections ostree-remount power-profiles-daemon qemu-guest-agent rhsmcertd
                    rsyslog rtkit-daemon selinux-autorelabel-mark smartd sshd sssd switcheroo-control
                    systemd-boot-update systemd-network-generator tuned udisks2 upower vgauthd vmtoolsd
   enabled-runtime  systemd-remount-fs
   disabled         arp-ethers blk-availability brltty canberra-system-bootup canberra-system-shutdown
                    canberra-system-shutdown-reboot chrony-wait cni-dhcp console-getty cpupower cups-browsed
                    dbus-daemon debug-shell dnf-system-upgrade dnsmasq iprdump iprinit iprupdate iscsid
                    iscsiuio kpatch kvm_stat ledmon man-db-restart-cache-update nftables nvmf-autoconnect
                    ostree-readonly-sysroot-migration podman podman-auto-update podman-clean-transient
                    podman-kube@ podman-restart psacct ras-mc-ctl rasdaemon rdisc rhcd rhsm rhsm-facts
                    rpmdb-rebuild selinux-check-proper-disable speech-dispatcherd sshd-keygen@
                    systemd-boot-check-no-failures systemd-pstore systemd-sysext wpa_supplicant
   indirect         serial-getty@ spice-vdagentd sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh
                    sssd-sudo systemd-sysupdate systemd-sysupdate-reboot

 ------------------------------------------------------------
 14. Linux kernel boot-time arguments, from /proc/cmdline
   BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.14.0-284.30.1.el9_2.x86_64
   root=/dev/mapper/rhel-root
   ro
   crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M
   resume=/dev/mapper/rhel-swap
   rd.lvm.lv=rhel/root
   rd.lvm.lv=rhel/swap
   pci=nobar
   selinux=0
   rhgb
   tsc=nowatchdog
   console=ttyS0,115200
   udev.children-max=512
   nmi_watchdog=0
   add_efi_memmap
   pci=nobar
   earlyprintk=ttyS0,115200

 ------------------------------------------------------------
 15. cpupower frequency-info
   analyzing CPU 0:
     current policy: frequency should be within 800 MHz and 3.50 GHz.
                     The governor "performance" may decide which speed to use
                     within this range.
     boost state support:
       Supported: yes
       Active: yes

 ------------------------------------------------------------
 16. tuned-adm active
   Current active profile: throughput-performance

 ------------------------------------------------------------
 17. sysctl
   kernel.numa_balancing               0
   kernel.randomize_va_space           2
   vm.compaction_proactiveness        20
   vm.dirty_background_bytes           0
   vm.dirty_background_ratio          10
   vm.dirty_bytes                      0
   vm.dirty_expire_centisecs        3000
   vm.dirty_ratio                     40
   vm.dirty_writeback_centisecs      500
   vm.dirtytime_expire_seconds     43200
   vm.extfrag_threshold              500
   vm.min_unmapped_ratio               1
   vm.nr_hugepages                  6144
   vm.nr_hugepages_mempolicy        6144
   vm.nr_overcommit_hugepages          0
   vm.swappiness                      10
   vm.watermark_boost_factor       15000
   vm.watermark_scale_factor          10
   vm.zone_reclaim_mode                0

 ------------------------------------------------------------
 18. /sys/kernel/mm/transparent_hugepage
   defrag          always defer defer+madvise [madvise] never
   enabled         [always] madvise never
   hpage_pmd_size  2097152
   shmem_enabled   always within_size advise [never] deny force

 ------------------------------------------------------------
 19. /sys/kernel/mm/transparent_hugepage/khugepaged
   alloc_sleep_millisecs   60000
   defrag                      1
   max_ptes_none             511
   max_ptes_shared           256
   max_ptes_swap              64
   pages_to_scan            4096
   scan_sleep_millisecs    10000

 ------------------------------------------------------------
 20. OS release
   From /etc/*-release /etc/*-version
   os-release     Red Hat Enterprise Linux 9.2 (Plow)
   redhat-release Red Hat Enterprise Linux release 9.2 (Plow)
   system-release Red Hat Enterprise Linux release 9.2 (Plow)

 ------------------------------------------------------------
 21. Disk information
 SPEC is set to: /mnt/spec
   Filesystem     Type  Size  Used Avail Use% Mounted on
   /dev/sdc       xfs    14T   11T  3.7T  75% /mnt

 ------------------------------------------------------------
 22. /sys/devices/virtual/dmi/id
     Vendor:         BULL
     Product:        BullSequana S series
     Product Family: -
     Serial:         -

 ------------------------------------------------------------
 23. dmidecode
   Additional information from dmidecode 3.3 follows.  WARNING: Use caution when you interpret this section.
   The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
   determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
   "DMTF SMBIOS" standard.
   Memory:
     96x Hynix HMCG94AEBRA109N 64 GB 2 rank 4800


 ------------------------------------------------------------
 24. BIOS
 (This section combines info from /sys/devices and dmidecode.)
    BIOS Vendor:       BULL
    BIOS Version:      BIOS_SAR121.79.00.007-D
    BIOS Date:         06/22/2024
    BIOS Revision:     121.79

Compiler Version Notes

============================================================================================================
C       | 500.perlbench_r(base, peak) 502.gcc_r(base, peak) 505.mcf_r(base, peak) 525.x264_r(base, peak)
        | 557.xz_r(base, peak)
------------------------------------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2023.2.3 Build x
Copyright (C) 1985-2023 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------------------------------------

============================================================================================================
C++     | 520.omnetpp_r(base, peak) 523.xalancbmk_r(base, peak) 531.deepsjeng_r(base, peak)
        | 541.leela_r(base, peak)
------------------------------------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2023.2.3 Build x
Copyright (C) 1985-2023 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------------------------------------

============================================================================================================
Fortran | 548.exchange2_r(base, peak)
------------------------------------------------------------------------------------------------------------
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 2023.2.3 Build x
Copyright (C) 1985-2023 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Base Portability Flags

500.perlbench_r:  -DSPEC_LP64   -DSPEC_LINUX_X64 
502.gcc_r:  -DSPEC_LP64 
505.mcf_r:  -DSPEC_LP64 
520.omnetpp_r:  -DSPEC_LP64 
523.xalancbmk_r:  -DSPEC_LP64   -DSPEC_LINUX 
525.x264_r:  -DSPEC_LP64 
531.deepsjeng_r:  -DSPEC_LP64 
541.leela_r:  -DSPEC_LP64 
548.exchange2_r:  -DSPEC_LP64 
557.xz_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -w   -std=c11   -m64   -Wl,-z,muldefs   -xsapphirerapids   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -L/home/specdev/new_compilers/ic2023.2.3/compiler/lib/intel64_lin   -lqkmalloc 

C++ benchmarks:

 -w   -std=c++14   -m64   -Wl,-z,muldefs   -xsapphirerapids   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -L/home/specdev/new_compilers/ic2023.2.3/compiler/lib/intel64_lin   -lqkmalloc 

Fortran benchmarks:

 -w   -m64   -Wl,-z,muldefs   -xsapphirerapids   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -L/home/specdev/new_compilers/ic2023.2.3/compiler/lib/intel64_lin   -lqkmalloc 

Peak Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

500.perlbench_r:  -w   -std=c11   -m64   -Wl,-z,muldefs   -fprofile-generate(pass 1)   -fprofile-use=default.profdata(pass 2)   -xCORE-AVX2(pass 1)   -flto   -Ofast   -xCORE-AVX512   -ffast-math   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fno-strict-overflow   -L/home/specdev/new_compilers/ic2023.2.3/compiler/lib/intel64_lin   -lqkmalloc 
502.gcc_r:  basepeak = yes 
505.mcf_r:  basepeak = yes 
525.x264_r:  -w   -std=c11   -m64   -Wl,-z,muldefs   -xsapphirerapids   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fno-alias   -L/home/specdev/new_compilers/ic2023.2.3/compiler/lib/intel64_lin   -lqkmalloc 
557.xz_r:  basepeak = yes 

C++ benchmarks:

520.omnetpp_r:  basepeak = yes 
523.xalancbmk_r:  basepeak = yes 
531.deepsjeng_r:  basepeak = yes 
541.leela_r:  basepeak = yes 

Fortran benchmarks:

548.exchange2_r:  basepeak = yes 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/BullSequanaSH-Flags-V1.1.html,
http://www.spec.org/cpu2017/flags/Intel-ic2023p2-official-linux64.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/BullSequanaSH-Flags-V1.1.xml,
http://www.spec.org/cpu2017/flags/Intel-ic2023p2-official-linux64.xml.