|
Lenovo Global Technology (Test Sponsor: Ampere Computing, Inc.) ThinkSystem HR330A |
SPECspeed®2017_fp_base = 35.0 |
|
SPECspeed®2017_fp_peak = 39.1 |
| CPU2017 License: | 6412 | Test Date: | Mar-2026 |
|---|---|---|---|
| Test Sponsor: | Ampere Computing, Inc. | Hardware Availability: | Apr-2019 |
| Tested by: | Ampere Computing, Inc. | Software Availability: | Aug-2025 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | Ampere eMAG 8180 |
| Max MHz: | 3300 |
| Nominal: | 3000 |
| Enabled: | 32 cores, 1 chip |
| Orderable: | 1 chips |
| Cache L1: | 32 KB I + 32 KB D on chip per core |
| L2: | 4 MB I+D on chip per chip (256 KiB shared / 2 cores) |
| L3: | 32 MB I+D on chip per chip |
| Other: | None |
| Memory: | 128 GB (8 x 16 GB 2Rx4 PC4-2666V-R) |
| Storage: | 1 x 480 GB SATA SSD |
| Other: | CPU Cooling: Air |
| Software | |
|---|---|
| OS: | Ubuntu 24.04.1 LTS kernel 6.8.0 (64KB pages) |
| Compiler: | C/C++/Fortran: Version 15.2.0 of GCC |
| Parallel: | Yes |
| Firmware: | Version 1.12 released Nov-2019 |
| File System: | ext4 |
| System State: | Run level 5 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| Other: | jemalloc v5.3+, commit hash 1972241 |
| Power Management: | OS CPU governor set to "performance" |
| Power | |
|---|---|
| Max. Power (W): | 289.13 |
| Idle Power (W): | 75.62 |
| Min. Temperature (C): | 21.00 |
| Elevation (m): | 60 |
| Line Standard: | 120 V / 60 Hz / 1 phase / 2 wire |
| Provisioning: | Line powered |
| Power Settings | |
|---|---|
| Management FW: | Version 11.05.111 of Falcon BMC |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 550 W (non-redundant) |
| Details: | Lenovo 03LD785 550 Watt High Efficiency Platinum AC Power Supply |
| Backplane: | N/A |
| Other Storage: | N/A |
| Storage Model #s: | 1 x Lenovo 01PE965 (480GB SATA SSD) connected to on-board HBA |
| NICs Installed: | 1 x Lenovo 01PE857 @ 10 GbE (2 ports ethernet) |
| NICs Enabled (FW/OS): | 2 / 1 |
| NICs Connected/Speed: | 1 @ 1 Gbps |
| Other HW Model #s: | -- |
| Power Analyzer | |
|---|---|
| Power Analyzer: | cpu-reference-ptd:8000 |
| Hardware Vendor: | Yokogawa |
| Model: | YokogawaWT310E |
| Serial Number: | T11733385 |
| Input Connection: | Serial over USB |
| Metrology Institute: | NIST |
| Calibration By: | Yokogawa USA |
| Calibration Label: | T126622 |
| Calibration Date: | 18-Aug-2025 |
| PTDaemon® Version: | 1.11.3 (0c074d7d; 2025-10-15) |
| Setup Description: | Directly connected |
| Current Ranges Used: | 5A |
| Voltage Range Used: | 150V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | cpu-reference-ptd:9000 |
| Hardware Vendor: | PCSensor |
| Model: | USB9097+DS18B20 |
| Serial Number: | -- |
| Input Connection: | USB |
| PTDaemon Version: | 1.11.3 (0c074d7d; 2025-10-15) |
| Setup Description: | In front of SUT front panel primary air inlet |
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_fp_base | 35.0 | ||||||||||||||||||
| SPECspeed®2017_fp_energy_base | 201 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 603.bwaves_s | 32 | 428 | 138 | 84.2 | 764 | 197 | 227 | 425 | 139 | 83.8 | 768 | 197 | 232 | 424 | 139 | 83.9 | 767 | 198 | 232 |
| 607.cactuBSSN_s | 32 | 280 | 59.6 | 51.7 | 353 | 185 | 206 | 281 | 59.4 | 51.7 | 353 | 184 | 204 | 280 | 59.5 | 51.8 | 352 | 185 | 207 |
| 619.lbm_s | 32 | 264 | 19.8 | 52.3 | 114 | 198 | 219 | 266 | 19.7 | 52.4 | 114 | 197 | 219 | 265 | 19.8 | 52.2 | 114 | 197 | 219 |
| 621.wrf_s | 32 | 421 | 31.4 | 81.8 | 177 | 194 | 217 | 419 | 31.5 | 82.1 | 176 | 196 | 218 | 420 | 31.5 | 82.6 | 175 | 197 | 226 |
| 627.cam4_s | 32 | 301 | 29.4 | 53.0 | 182 | 176 | 205 | 301 | 29.4 | 52.9 | 182 | 176 | 203 | 302 | 29.4 | 53.0 | 182 | 176 | 205 |
| 628.pop2_s | 32 | 505 | 23.5 | 95.1 | 137 | 189 | 213 | 502 | 23.6 | 94.4 | 138 | 188 | 207 | 504 | 23.5 | 95.3 | 137 | 189 | 208 |
| 638.imagick_s | 32 | 645 | 22.4 | 164 | 96.1 | 254 | 286 | 646 | 22.3 | 163 | 96.5 | 252 | 286 | 646 | 22.3 | 164 | 96.1 | 253 | 286 |
| 644.nab_s | 32 | 391 | 44.6 | 62.9 | 302 | 161 | 177 | 391 | 44.7 | 62.9 | 302 | 161 | 176 | 391 | 44.7 | 62.9 | 302 | 161 | 176 |
| 649.fotonik3d_s | 32 | 336 | 27.1 | 54.7 | 187 | 163 | 180 | 337 | 27.1 | 54.7 | 187 | 162 | 179 | 335 | 27.2 | 54.6 | 188 | 163 | 180 |
| 654.roms_s | 32 | 545 | 28.9 | 116 | 152 | 213 | 255 | 546 | 28.8 | 116 | 151 | 213 | 253 | 546 | 28.8 | 117 | 150 | 215 | 254 |
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_fp_peak | 39.1 | ||||||||||||||||||
| SPECspeed®2017_fp_energy_peak | 224 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 603.bwaves_s | 32 | 372 | 159 | 76.5 | 842 | 206 | 237 | 372 | 159 | 77.3 | 833 | 208 | 244 | 373 | 158 | 76.8 | 838 | 206 | 243 |
| 607.cactuBSSN_s | 32 | 249 | 67.0 | 46.2 | 395 | 186 | 202 | 249 | 67.1 | 46.2 | 395 | 186 | 203 | 247 | 67.4 | 45.9 | 397 | 186 | 203 |
| 619.lbm_s | 32 | 257 | 20.4 | 51.8 | 115 | 202 | 223 | 257 | 20.4 | 52.6 | 113 | 205 | 228 | 257 | 20.4 | 51.4 | 116 | 200 | 223 |
| 621.wrf_s | 32 | 346 | 38.3 | 71.5 | 202 | 207 | 245 | 348 | 38.0 | 71.9 | 201 | 207 | 257 | 347 | 38.1 | 71.8 | 201 | 207 | 240 |
| 627.cam4_s | 32 | 184 | 48.3 | 35.0 | 275 | 191 | 226 | 184 | 48.1 | 35.4 | 273 | 192 | 227 | 184 | 48.2 | 35.1 | 275 | 190 | 226 |
| 628.pop2_s | 32 | 505 | 23.5 | 95.1 | 137 | 189 | 213 | 502 | 23.6 | 94.4 | 138 | 188 | 207 | 504 | 23.5 | 95.3 | 137 | 189 | 208 |
| 638.imagick_s | 32 | 716 | 20.1 | 162 | 96.9 | 227 | 288 | 716 | 20.2 | 158 | 99.2 | 221 | 289 | 715 | 20.2 | 162 | 96.9 | 227 | 289 |
| 644.nab_s | 32 | 317 | 55.2 | 51.0 | 373 | 161 | 174 | 316 | 55.3 | 50.9 | 373 | 161 | 174 | 316 | 55.2 | 50.9 | 373 | 161 | 173 |
| 649.fotonik3d_s | 32 | 333 | 27.4 | 53.8 | 190 | 162 | 178 | 334 | 27.3 | 53.9 | 190 | 161 | 178 | 334 | 27.3 | 53.9 | 190 | 161 | 178 |
| 654.roms_s | 32 | 531 | 29.7 | 112 | 157 | 211 | 269 | 530 | 29.7 | 112 | 157 | 212 | 268 | 531 | 29.7 | 112 | 158 | 210 | 271 |
Environment variables set by runcpu before the start of the run: LD_LIBRARY_PATH = "/usr/lib64/:/usr/lib/:/lib64:/home/mjm/jemalloc/lib" OMP_STACKSIZE = "120M"
607.cactuBSSN_s (peak): "snprintf" src.alt was used. 607.cactuBSSN_s (base): "snprintf" src.alt was used. jemalloc is a general purpose malloc(3) implementation that emphasizes fragmentation avoidance and scalable concurrency support. sources available from https://github.com/facebook/jemalloc/tree/1972241 and built via "./configure --with-lg-quantum=3" which used system gcc-14 -O3 This benchmark result is intended to provide perspective on past power and/or performance using the historical hardware and/or software described on this result page. The system as described on this result page was formerly generally available. At the time of this publication, it may not be shipping, and/or may not be supported, and/or may fail to meet other tests of General Availability described in the SPEC OSG Policy document, http://www.spec.org/osg/policy.html This measured result may not be representative of the result that would be measured were this benchmark run with hardware and software available as of the publication date.
Sysinfo program /home/mjm/cpu2017/bin/sysinfo
Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197
running on emag Wed Mar 4 07:35:37 2026
SUT (System Under Test) info as seen by some common utilities.
------------------------------------------------------------
Table of contents
------------------------------------------------------------
1. uname -a
2. w
3. Username
4. ulimit -a
5. sysinfo process ancestry
6. /proc/cpuinfo
7. lscpu
8. numactl --hardware
9. /proc/meminfo
10. who -r
11. Systemd service manager version: systemd 255 (255.4-1ubuntu8.8)
12. Services, from systemctl list-unit-files
13. Linux kernel boot-time arguments, from /proc/cmdline
14. sysctl
15. /sys/kernel/mm/transparent_hugepage
16. /sys/kernel/mm/transparent_hugepage/khugepaged
17. OS release
18. Disk information
19. /sys/devices/virtual/dmi/id
20. dmidecode
21. BIOS
------------------------------------------------------------
------------------------------------------------------------
1. uname -a
Linux emag 6.8.0 #1 SMP PREEMPT_DYNAMIC Fri Feb 28 00:25:30 UTC 2025 aarch64 aarch64 aarch64 GNU/Linux
------------------------------------------------------------
2. w
07:35:37 up 75 days, 8:00, 2 users, load average: 1.08, 4.50, 3.69
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
mjm 10.13.114.186 28Jan26 4days 0.00s 0.02s sshd: mjm [priv]
------------------------------------------------------------
3. Username
From environment variable $USER: mjm
------------------------------------------------------------
4. ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) unlimited
coredump(blocks) 0
memory(kbytes) unlimited
locked memory(kbytes) 16691648
process 128681
nofiles 1024
vmemory(kbytes) unlimited
locks unlimited
rtprio 0
------------------------------------------------------------
5. sysinfo process ancestry
/usr/lib/systemd/systemd --system --deserialize=66
SCREEN
-bin/tcsh
runcpu --flagsurl=$SPEC/gcc.2024-08-14.xml --reportable -c emag-O3-gcc15 --tune=base,peak -n 3 --threads 32
fpspeed
runcpu --flagsurl $SPEC/gcc.2024-08-14.xml --reportable --configfile emag-O3-gcc15 --tune base,peak
--iterations 3 --threads 32 --runmode speed --tune base:peak --size refspeed fpspeed --nopreenv
--note-preenv --logfile $SPEC/tmp/CPU2017.098/templogs/preenv.fpspeed.098.0.log --lognum 098.0
--from_runcpu 2
specperl $SPEC/bin/sysinfo -f
$SPEC = /home/mjm/cpu2017
------------------------------------------------------------
6. /proc/cpuinfo
CPU implementer : 0x50
CPU architecture: 8
CPU variant : 0x3
CPU part : 0x000
CPU revision : 2
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
------------------------------------------------------------
7. lscpu
From lscpu from util-linux 2.39.3:
Architecture: aarch64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Vendor ID: APM
Model name: -
Model: 2
Thread(s) per core: 1
Core(s) per socket: 32
Socket(s): 1
Stepping: 0x3
Frequency boost: disabled
CPU(s) scaling MHz: 100%
CPU max MHz: 2911.7639
CPU min MHz: 363.9700
BogoMIPS: 80.00
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
L1d cache: 1 MiB (32 instances)
L1i cache: 1 MiB (32 instances)
L2 cache: 4 MiB (16 instances)
NUMA node(s): 1
NUMA node0 CPU(s): 0-31
Vulnerability Gather data sampling: Not affected
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Not affected
Vulnerability Mds: Not affected
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Mmio stale data: Not affected
Vulnerability Retbleed: Not affected
Vulnerability Spec rstack overflow: Not affected
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1: Mitigation; __user pointer sanitization
Vulnerability Spectre v2: Vulnerable
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
From lscpu --cache:
NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE
L1d 32K 1M 8 Data 1
L1i 32K 1M 8 Instruction 1
L2 256K 4M 32 Unified 2
------------------------------------------------------------
8. numactl --hardware
NOTE: a numactl 'node' might or might not correspond to a physical chip.
available: 1 nodes (0)
node 0 cpus: 0-31
node 0 size: 130403 MB
node 0 free: 68466 MB
node distances:
node 0
0: 10
------------------------------------------------------------
9. /proc/meminfo
MemTotal: 133533376 kB
------------------------------------------------------------
10. who -r
run-level 5 Dec 18 23:35
------------------------------------------------------------
11. Systemd service manager version: systemd 255 (255.4-1ubuntu8.8)
Default Target Status
graphical running
------------------------------------------------------------
12. Services, from systemctl list-unit-files
STATE UNIT FILES
enabled ModemManager apparmor apport blk-availability cloud-config cloud-final cloud-init
cloud-init-local console-setup cron dmesg e2scrub_reap finalrd getty@ grub-common
grub-initrd-fallback keyboard-setup lvm2-monitor multipathd networkd-dispatcher open-iscsi
open-vm-tools pollinate power-profiles-daemon rsyslog secureboot-db setvtrgb snapd sysstat
systemd-networkd systemd-networkd-wait-online systemd-pstore systemd-resolved
systemd-timesyncd ua-reboot-cmds ubuntu-advantage udisks2 ufw unattended-upgrades vgauth
enabled-runtime netplan-ovs-cleanup systemd-fsck-root systemd-remount-fs
disabled console-getty debug-shell ipmievd iscsid nftables rsync ssh systemd-boot-check-no-failures
systemd-confext systemd-network-generator systemd-networkd-wait-online@
systemd-pcrlock-file-system systemd-pcrlock-firmware-code systemd-pcrlock-firmware-config
systemd-pcrlock-machine-id systemd-pcrlock-make-policy
systemd-pcrlock-secureboot-authority systemd-pcrlock-secureboot-policy systemd-sysext
systemd-time-wait-sync
generated openipmi perlbal
indirect serial-getty@ systemd-sysupdate systemd-sysupdate-reboot uuidd
masked cryptdisks cryptdisks-early hwclock multipath-tools-boot screen-cleanup sudo x11-common
------------------------------------------------------------
13. Linux kernel boot-time arguments, from /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-6.8.0
root=UUID=16268541-06d0-4374-97ca-2d512d4db26f
ro
cma=1024M
iommu.passthrough=1
------------------------------------------------------------
14. sysctl
kernel.numa_balancing 0
kernel.randomize_va_space 2
vm.compaction_proactiveness 20
vm.dirty_background_bytes 0
vm.dirty_background_ratio 10
vm.dirty_bytes 0
vm.dirty_expire_centisecs 3000
vm.dirty_ratio 20
vm.dirty_writeback_centisecs 500
vm.dirtytime_expire_seconds 43200
vm.extfrag_threshold 500
vm.min_unmapped_ratio 1
vm.nr_hugepages 0
vm.nr_hugepages_mempolicy 0
vm.nr_overcommit_hugepages 0
vm.swappiness 60
vm.watermark_boost_factor 15000
vm.watermark_scale_factor 10
vm.zone_reclaim_mode 0
------------------------------------------------------------
15. /sys/kernel/mm/transparent_hugepage
defrag always defer defer+madvise [madvise] never
enabled always [madvise] never
hpage_pmd_size 536870912
shmem_enabled always within_size advise [never] deny force
------------------------------------------------------------
16. /sys/kernel/mm/transparent_hugepage/khugepaged
alloc_sleep_millisecs 60000
defrag 1
max_ptes_none 8191
max_ptes_shared 4096
max_ptes_swap 1024
pages_to_scan 65536
scan_sleep_millisecs 10000
------------------------------------------------------------
17. OS release
From /etc/*-release /etc/*-version
os-release Ubuntu 24.04.1 LTS
------------------------------------------------------------
18. Disk information
SPEC is set to: /home/mjm/cpu2017
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 439G 317G 99G 77% /
------------------------------------------------------------
19. /sys/devices/virtual/dmi/id
Vendor: Lenovo
Product: HR330A 7X33CTO1WW
Product Family: Lenovo ThinkSystem HR330A/HR350A
------------------------------------------------------------
20. dmidecode
Additional information from dmidecode 3.5 follows. WARNING: Use caution when you interpret this section.
The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
"DMTF SMBIOS" standard.
Memory:
8x Samsung M393A2K43CB2-CTD 16 GB 2 rank 2667
------------------------------------------------------------
21. BIOS
(This section combines info from /sys/devices and dmidecode.)
BIOS Vendor: LENOVO
BIOS Version: HVE104N-1.12
BIOS Date: 11/29/2019
BIOS Revision: 1.12
Firmware Revision: 1.7
OS CPU governor was set using the command: echo performance | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
============================================================================================================ C | 619.lbm_s(base, peak) 638.imagick_s(base, peak) 644.nab_s(base, peak) ------------------------------------------------------------------------------------------------------------ gcc (GCC) 15.2.0 Copyright (C) 2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------------------------------------ ============================================================================================================ C++, C, Fortran | 607.cactuBSSN_s(base, peak) ------------------------------------------------------------------------------------------------------------ g++ (GCC) 15.2.0 Copyright (C) 2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. gcc (GCC) 15.2.0 Copyright (C) 2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. GNU Fortran (GCC) 15.2.0 Copyright (C) 2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------------------------------------ ============================================================================================================ Fortran | 603.bwaves_s(base, peak) 649.fotonik3d_s(base, peak) 654.roms_s(base, peak) ------------------------------------------------------------------------------------------------------------ GNU Fortran (GCC) 15.2.0 Copyright (C) 2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------------------------------------ ============================================================================================================ Fortran, C | 621.wrf_s(base, peak) 627.cam4_s(base, peak) 628.pop2_s(base, peak) ------------------------------------------------------------------------------------------------------------ GNU Fortran (GCC) 15.2.0 Copyright (C) 2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. gcc (GCC) 15.2.0 Copyright (C) 2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------------------------------------
| gcc |
| gfortran |
| gfortran gcc |
| g++ gcc gfortran |
| 603.bwaves_s: | -DSPEC_LP64 |
| 607.cactuBSSN_s: | -DSPEC_LP64 |
| 619.lbm_s: | -DSPEC_LP64 |
| 621.wrf_s: | -DSPEC_CASE_FLAG -fconvert=big-endian -DSPEC_LP64 |
| 627.cam4_s: | -DSPEC_CASE_FLAG -DSPEC_LP64 |
| 628.pop2_s: | -DSPEC_CASE_FLAG -fconvert=big-endian -DSPEC_LP64 |
| 638.imagick_s: | -DSPEC_LP64 |
| 644.nab_s: | -DSPEC_LP64 |
| 649.fotonik3d_s: | -DSPEC_LP64 |
| 654.roms_s: | -DSPEC_LP64 |
| -mabi=lp64 -std=c99 -g -O3 -mcpu=native -flto=16 -fno-strict-aliasing -fopenmp -DSPEC_OPENMP -L/home/mjm/jemalloc/lib -ljemalloc |
| -mabi=lp64 -g -O3 -mcpu=native -flto=16 -DSPEC_OPENMP -fopenmp -L/home/mjm/jemalloc/lib -ljemalloc |
| -mabi=lp64 -std=c99 -g -O3 -mcpu=native -flto=16 -fno-strict-aliasing -DSPEC_OPENMP -fopenmp -L/home/mjm/jemalloc/lib -ljemalloc |
| -mabi=lp64 -std=c++03 -std=c99 -g -O3 -mcpu=native -flto=16 -fno-strict-aliasing -fopenmp -DSPEC_OPENMP -L/home/mjm/jemalloc/lib -ljemalloc |
| -Wno-error=implicit-int |
| -fallow-argument-mismatch |
| -Wno-error=implicit-int -fallow-argument-mismatch |
| -Wno-error=implicit-int -fallow-argument-mismatch |
| gcc |
| gfortran |
| gfortran gcc |
| g++ gcc gfortran |
Same as Base Portability Flags
| -mabi=lp64 -std=c99 -fprofile-generate -fprofile-use -g -Ofast -mcpu=native -flto=16 -fopenmp -DSPEC_OPENMP -L/home/mjm/jemalloc/lib -ljemalloc |
| -mabi=lp64 -fprofile-generate -fprofile-use -g -Ofast -mcpu=native -flto=16 -DSPEC_OPENMP -fopenmp -L/home/mjm/jemalloc/lib -ljemalloc |
| 621.wrf_s: | -mabi=lp64 -std=c99 -fprofile-generate -fprofile-use -g -Ofast -mcpu=native -flto=16 -DSPEC_OPENMP -fopenmp -L/home/mjm/jemalloc/lib -ljemalloc |
| 627.cam4_s: | -mabi=lp64 -std=c99 -fprofile-generate -fprofile-use -g -Ofast -mcpu=native -flto=16 -fno-strict-aliasing -DSPEC_OPENMP -fopenmp -L/home/mjm/jemalloc/lib -ljemalloc |
| 628.pop2_s: | basepeak = yes |
| -mabi=lp64 -std=c++03 -std=c99 -fprofile-generate -fprofile-use -g -Ofast -mcpu=native -flto=16 -fopenmp -DSPEC_OPENMP -L/home/mjm/jemalloc/lib -ljemalloc |