Comment at the top of ns-3.38/examples/wireless/wifi-eht-network.cc

// This is a simple example in order to show how to configure an IEEE 802.11be Wi-Fi network.
//
// It outputs the UDP or TCP goodput for every EHT MCS value, which depends on the MCS value (0 to
// 13), the channel width (20, 40, 80 or 160 MHz) and the guard interval (800ns, 1600ns or 3200ns).
// The PHY bitrate is constant over all the simulation run. The user can also specify the distance
// between the access point and the station: the larger the distance the smaller the goodput.
//
// The simulation assumes a configurable number of stations in an infrastructure network:
//
//  STA     AP
//    *     *
//    |     |
//   n1     n2
//
// Packets in this simulation belong to BestEffort Access Class (AC_BE).
// By selecting an acknowledgment sequence for DL MU PPDUs, it is possible to aggregate a
// Round Robin scheduler to the AP, so that DL MU PPDUs are sent by the AP via DL OFDMA.