SPEC CPU®2026 Integer Rate Result

Copyright 2026 Standard Performance Evaluation Corporation

GIGA-BYTE TECHNOLOGY CO., LTD. (Test Sponsor: Ampere Computing, Inc.)

R2A3-T40-AAV1
(3.20 GHz AmpereOneM A192-32M)

SPECrate®2026_int_base = 42900

SPECrate®2026_int_energy_base = 55.10

SPECrate®2026_int_peak = 46200

SPECrate®2026_int_energy_peak = 59.70
CPU2026 License: 6412 Test Date: Feb-2026
Test Sponsor: Ampere Computing, Inc. Hardware Availability: Nov-2025
Tested by: Ampere Computing, Inc. Software Availability: Oct-2025
Benchmark results graph
Hardware
CPU Name: AmpereOneM A192-32M
  Max MHz: 3200
  Nominal: 3200
Enabled: 192 cores, 1 chip
Orderable: 1 chip
Cache L1: 16 KB I + 64 KB D on chip per core
  L2: 2 MB I+D on chip per core
  L3: 64 MB I+D on chip per chip
  Other: None
Memory: 768 GB (12 x 64 GB 2Rx4 PC5-5600B-R)
Storage: 1 x 960 GB Samsung M.2 (MZ1L2960HCJR-00A07)
Cooling: Air
Other: None
Software
OS: Fedora Linux 43 (Server Edition)
6.17.5-200.64K_PS.fc42.aarch64
Compiler: C/C++/Fortran: Version 15.2.0 of GCC
Compiler Category: Community
Firmware: Version 5.4.5.1 released Oct-2025
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: Jemalloc memory allocator library v5.3.0
Power Management: OS CPU governor set to "performance"
Power
Max. Power (W): 854.3
Idle Power (W): 236.28
Min. Temperature (C): 20.50
Elevation (m): 60
Line Standard: 120 V / 60 Hz / 1 phase / 2 wire
Provisioning: Line powered
Power Settings
Management FW: Version 4.06 of MegaRAC BMC
Memory Mode: Normal
Power-Relevant Hardware
Power Supply: 1 x 1600 W (non-redundant)
  Details: 1+1 1600W 80 PLUS Titanium redundant power
supplies
AC Power Supply
Backplane: PCIe Gen5 x4
Other Storage: Embedded SATA Controller
Storage Model #s: R2A3-T40-AAV1
NICs Installed: 1 x Mellanox Technologies MT27710 Family @ 25 GbE
(2 ports ethernet)
NICs Enabled (FW/OS): 2 / 1
NICs Connected/Speed: 1 @ 25 Gbps
Other HW Model #s: Fan configuration is 4 x 80x80x38mm
Power Analyzer
Power Analyzer: cpu-reference-ptd:8000
Hardware Vendor: Yokogawa
Model: WT-310
Serial Number: T11733285
Input Connection: Serial over USB
Metrology Institute: NIST
Calibration By: Yokogawa USA
Calibration Label: T126622
Calibration Date: 13-Aug-2025
PTDaemon® Version: 1.11.3 (0c074d7d; 2025-10-15)
Setup Description: Directly Connected to PSU 1
Current Ranges Used: 10A
Voltage Range Used: 150V
Temperature Meter
Temperature Meter: cpu-reference-ptd:9000
Hardware Vendor: PCSensor
Model: USB9097+DS18B20
Serial Number: N/A
Input Connection: USB
PTDaemon Version: 1.11.3 (0c074d7d; 2025-10-15)
Setup Description: In front of SUT front panel primary air inlet

Base Results Table

Benchmark Copies Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power
706.stockfish_r 192 335 722 2210 92.8 661 710 334 724 2250 91.3 673 713 335 723 2260 91.0 674 713
707.ntest_r 192 247 461 1380 69.2 559 582 245 464 1380 69.1 562 581 248 459 1390 68.4 562 584
708.sqlite_r 192 341 297 2270 37.4 666 842 348 292 2280 37.3 655 834 340 298 2260 37.7 663 854
710.omnetpp_r 192 220 425 1390 56.5 633 769 220 423 1390 56.5 631 767 217 429 1380 56.7 637 769
714.cpython_r 192 184 500 1380 55.8 750 828 185 497 1380 55.7 745 825 183 502 1390 55.3 760 831
721.gcc_r 192 444 297 2700 41.1 608 756 444 296 2700 41.1 608 764 445 296 2710 41.0 608 766
723.llvm_r 192 234 415 1560 52.4 664 739 234 416 1560 52.5 664 743 235 414 1570 52.0 668 749
727.cppcheck_r 192 185 372 1280 45.3 690 807 186 370 1270 45.5 682 802 187 369 1280 45.2 686 804
729.abc_r 192 262 336 1620 45.5 618 792 262 336 1620 45.6 618 794 262 336 1620 45.5 618 785
734.vpr_r 192 234 378 1510 49.1 644 773 235 376 1520 48.8 645 772 237 374 1520 48.7 642 767
735.gem5_r 192 138 680 97.1 80.6 706 798 136 685 97.2 80.5 712 794 137 680 97.8 80.0 712 821
750.sealcrypto_r 192 250 412 1810 47.9 726 750 247 416 1800 48.2 728 751 246 418 1800 48.2 731 748
753.ns3_r 192 135 874 91.8 1080 682 765 135 872 92.3 1070 684 767 135 873 91.6 1080 679 757
777.zstd_r 192 513 241 2960 35.1 577 700 513 241 2960 35.0 578 696 512 242 2970 35.0 580 700
SPECrate®2026_int_base 42900
SPECrate®2026_int_energy_base 55.10
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.

Peak Results Table

Benchmark Copies Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power
706.stockfish_r 192 329 736 2170 94.5 662 714 327 740 2210 93.0 675 717 326 742 2190 93.9 671 715
707.ntest_r 192 247 461 1380 69.2 559 582 245 464 1380 69.1 562 581 248 459 1390 68.4 562 584
708.sqlite_r 192 317 320 2050 41.6 646 821 318 319 2040 41.7 642 826 319 318 2050 41.5 643 826
710.omnetpp_r 192 192 486 1190 66.3 618 766 186 501 1180 66.4 635 767 188 497 1170 66.9 625 769
714.cpython_r 192 147 627 1100 69.6 752 825 146 628 1110 69.5 756 825 147 627 1110 69.5 754 824
721.gcc_r 192 421 313 2510 44.3 597 761 421 313 2500 44.5 592 759 421 313 2510 44.3 596 764
723.llvm_r 192 189 515 1240 65.9 656 753 189 516 1240 65.9 656 747 189 516 1240 65.8 658 746
727.cppcheck_r 192 180 383 1180 49.1 655 785 181 381 1190 48.6 659 787 180 384 1180 49.1 656 789
729.abc_r 192 261 338 1610 45.8 618 782 261 338 1610 45.8 617 787 261 337 1610 45.8 616 785
734.vpr_r 192 230 384 1450 51.1 630 751 230 385 1450 51.2 630 768 230 385 1450 50.9 633 773
735.gem5_r 192 133 705 93.8 83.5 707 799 135 694 94.6 82.7 702 800 133 704 94.4 82.9 711 796
750.sealcrypto_r 192 250 412 1810 47.9 726 750 247 416 1800 48.2 728 751 246 418 1800 48.2 731 748
753.ns3_r 192 115 1020 80.5 1230 698 778 115 1020 80.3 1230 699 782 115 1020 80.1 1230 695 770
777.zstd_r 192 501 247 2920 35.5 583 702 497 249 2910 35.6 585 705 497 249 2920 35.6 587 703
SPECrate®2026_int_peak 46200
SPECrate®2026_int_energy_peak 59.70
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.

Compiler Notes

 Binaries were compiled on a system with 1x AmpereOneM CPU
 chip + 768 GB Memory using Fedora Linux 42

Submit Notes

 The config file option 'submit' was used.
 'numactl' was used to bind copies to the cores.

Operating System Notes

 'ulimit -s unlimited' was used to set environment stack size
 Set dirty_ratio=8 to limit dirty cache to 8% of memory
      echo 8 | sudo tee /proc/sys/vm/dirty_ratio
 Set swappiness=1 to swap only if necessary
      echo 1 | sudo tee /proc/sys/vm/swappiness
 Set zone_reclaim_mode=1 to free local node memory and avoid remote memory
      echo 1 | sudo tee /proc/sys/vm/zone_reclaim_mode
 Set drop_caches=3 to reset caches before invoking runcpu
      echo 3 | sudo tee /proc/sys/vm/drop_caches
 Set numa_balancing=0 to disable automatic numa balancing
      echo 0 | sudo tee /proc/sys/kernel/numa_balancing
 Switch off all ktune and tuned settings
      sudo tuned-adm off
 Transparent huge pages set to 'never'
      sudo bash -c "echo never > /sys/kernel/mm/transparent_hugepage/enabled"

 runcpu command invoked through numactl i.e.
 numactl --interleave=all runcpu <etc>

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
     "/home/amptest/workspace/sir2026_pkg_verify/ampere_spec2026/spec2026/jem
     alloc/install/lib:/home/amptest/workspace/sir2026_pkg_verify/ampere_spec
     2026/spec2026/gcc/install/lib64:/home/amptest/ampere_spec2026/spec2026/j
     emalloc/install/lib:/home/amptest/ampere_spec2026/spec2026/gcc/install/l
     ib64"
MALLOC_CONF = "thp:never,dirty_decay_ms:-1,muzzy_decay_ms:-1,retain:true"

General Notes

 Jemalloc v5.3.0 is available via
 https://github.com/jemalloc/jemalloc/releases/download/5.3.0/jemalloc-5.3.0.tar.bz2
 It was built on Fedora Linux 42 using Version 15.2.0 of GCC
 The configure options are
 "--with-lg-page=16" for building libjemalloc.so, and
 "--with-lg-quantum=3 --with-lg-page=16" for building libjemalloc_ext.so
 Tuned MALLOC_CONF in terms of https://jemalloc.net/jemalloc.3.html

  NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
  is mitigated in the system as tested and documented.
  Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
  is mitigated in the system as tested and documented.
  Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
  is mitigated in the system as tested and documented.

Platform Notes

 Note: lscpu is not able to detect the SLC.
 SLC is defined at https://developer.arm.com/documentation/100180/0103/bry1436285730281

 Sysinfo program /home/amptest/workspace/sir2026_pkg_verify/ampere_spec2026/spec2026/bin/sysinfo
 Rev: 069f95da7e7f5d81b2ce48a82150e54f
 running on ampereone Wed Feb  4 11:21:17 2026

 SUT (System Under Test) info as seen by some common utilities.

 ------------------------------------------------------------
 Table of contents
 ------------------------------------------------------------
  1. uname -srvm
  2. w
  3. Username
  4. ulimit -a
  5. sysinfo process ancestry
  6. /proc/cpuinfo
  7. lscpu
  8. numactl --hardware
  9. /proc/meminfo
 10. Systemd service manager version: systemd 258 (258-1.fc43)
 11. Services, from systemctl list-unit-files
 12. Linux kernel boot-time arguments, from /proc/cmdline
 13. cpupower frequency-info
 14. tuned-adm active
 15. sysctl
 16. /sys/kernel/mm/transparent_hugepage
 17. /sys/kernel/mm/transparent_hugepage/khugepaged
 18. OS release
 19. Disk information
 20. /sys/devices/virtual/dmi/id
 21. dmidecode
 22. BIOS
 ------------------------------------------------------------

 ------------------------------------------------------------
 1. uname -srvm
   Linux 6.17.5-200.64K_PS.fc42.aarch64 #1 SMP PREEMPT_DYNAMIC Wed Jan 21 08:54:52 EST 2026 aarch64

 ------------------------------------------------------------
 2. w
    11:21:17 up  3:34,  2 users,  load average: 95.96, 34.00, 12.19
   USER     TTY        LOGIN@   IDLE   JCPU   PCPU WHAT
   amptest            07:47    3:34m  0.00s  0.02s sshd-session: amptest [priv]
   amptest            07:47    3:34m  0.00s  0.17s /usr/lib/systemd/systemd --user

 ------------------------------------------------------------
 3. Username
   From environment variable $USER:  root
   From the command 'logname':       amptest

 ------------------------------------------------------------
 4. ulimit -a
   real-time non-blocking time  (microseconds, -R) unlimited
   core file size              (blocks, -c) 0
   data seg size               (kbytes, -d) unlimited
   scheduling priority                 (-e) 0
   file size                   (blocks, -f) unlimited
   pending signals                     (-i) 784991
   max locked memory           (kbytes, -l) 8192
   max memory size             (kbytes, -m) unlimited
   open files                          (-n) 524288
   pipe size                (512 bytes, -p) 8
   POSIX message queues         (bytes, -q) 819200
   real-time priority                  (-r) 0
   stack size                  (kbytes, -s) unlimited
   cpu time                   (seconds, -t) unlimited
   max user processes                  (-u) 784991
   virtual memory              (kbytes, -v) unlimited
   file locks                          (-x) unlimited

 ------------------------------------------------------------
 5. sysinfo process ancestry
  /usr/lib/systemd/systemd --switched-root --system --deserialize=57
  sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
  sshd-session: amptest [priv]
  sshd-session: amptest@notty
  java -jar remoting.jar -workDir /home/amptest -jar-cache /home/amptest/remoting/jarCache
  /bin/bash /tmp/jenkins1326802532574597729.sh
  sudo -S -E UPDATE_UTIL=false /home/amptest/util/jenkins/speccpu_pkg_verify.sh
    GreenSIR2026/without_report/spec2026_intrate_gcc15_Ofast_static_ampereonem_power_109.tgz
  /bin/bash /home/amptest/util/jenkins/speccpu_pkg_verify.sh
    GreenSIR2026/without_report/spec2026_intrate_gcc15_Ofast_static_ampereonem_power_109.tgz
  /bin/bash /home/amptest/workspace/sir2026_pkg_verify/ampere_spec2026/run_spec2026.sh --iterations 3
    --nobuild --action run --copies 192 --reportable --tune=base,peak intrate
  runcpu --config=ampere_aarch64 --define numasize=48 --define
    gcc_dir=/home/amptest/ampere_spec2026/spec2026/gcc/install --define
    llvm_dir=/home/amptest/ampere_spec2026/spec2026/llvm/install --define
    jemalloc_dir=/home/amptest/ampere_spec2026/spec2026/jemalloc/install --define glibc_dir=/ --iterations 3
    --nobuild --action run --copies 192 --reportable --tune=base,peak intrate
  runcpu --configfile ampere_aarch64 --define numasize=48 --define
    gcc_dir=/home/amptest/ampere_spec2026/spec2026/gcc/install --define
    llvm_dir=/home/amptest/ampere_spec2026/spec2026/llvm/install --define
    jemalloc_dir=/home/amptest/ampere_spec2026/spec2026/jemalloc/install --define glibc_dir=/ --iterations 3
    --nobuild --action run --copies 192 --reportable --tune base,peak --runmode rate --tune base:peak --size
    refrate intrate --nopreenv --note-preenv --logfile $SPEC/tmp/CPU2026.003/templogs/preenv.intrate.003.0.log
    --lognum 003.0 --from_runcpu 2
  specperl $SPEC/bin/sysinfo -f
 $SPEC = /home/amptest/workspace/sir2026_pkg_verify/ampere_spec2026/spec2026

 ------------------------------------------------------------
 6. /proc/cpuinfo
     CPU implementer : 0xc0
     CPU architecture: 8
     CPU variant     : 0x0
     CPU part        : 0xac4
     CPU revision    : 0
     Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm jscvt
                       fcma lrcpc dcpop sha3 sm3 sm4 asimddp sha512 asimdfhm dit uscat ilrcpc flagm ssbs sb
                       paca pacg dcpodp flagm2 frint i8mm bf16 rng bti ecv

 ------------------------------------------------------------
 7. lscpu

 From lscpu from util-linux 2.41.3:
   Architecture:                            aarch64
   CPU op-mode(s):                          64-bit
   Byte Order:                              Little Endian
   CPU(s):                                  192
   On-line CPU(s) list:                     0-191
   Vendor ID:                               Ampere
   BIOS Vendor ID:                          Ampere (R)
   Model name:                              Ampere-1a
   BIOS Model name:                         AmpereOne (R) A192-32M CPU @ 3.2GHz
   BIOS CPU family:                         257
   Model:                                   0
   Thread(s) per core:                      1
   Core(s) per socket:                      192
   Socket(s):                               1
   Stepping:                                0x0
   Frequency boost:                         disabled
   CPU(s) scaling MHz:                      100%
   CPU max MHz:                             3200.0000
   CPU min MHz:                             1000.0000
   BogoMIPS:                                2000.00
   Flags:                                   fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp
                                            cpuid asimdrdm jscvt fcma lrcpc dcpop sha3 sm3 sm4 asimddp sha512
                                            asimdfhm dit uscat ilrcpc flagm ssbs sb paca pacg dcpodp flagm2
                                            frint i8mm bf16 rng bti ecv
   L1d cache:                               12 MiB (192 instances)
   L1i cache:                               3 MiB (192 instances)
   L2 cache:                                384 MiB (192 instances)
   NUMA node(s):                            4
   NUMA node0 CPU(s):                       0-47
   NUMA node1 CPU(s):                       48-95
   NUMA node2 CPU(s):                       96-143
   NUMA node3 CPU(s):                       144-191
   Vulnerability Gather data sampling:      Not affected
   Vulnerability Ghostwrite:                Not affected
   Vulnerability Indirect target selection: Not affected
   Vulnerability Itlb multihit:             Not affected
   Vulnerability L1tf:                      Not affected
   Vulnerability Mds:                       Not affected
   Vulnerability Meltdown:                  Not affected
   Vulnerability Mmio stale data:           Not affected
   Vulnerability Old microcode:             Not affected
   Vulnerability Reg file data sampling:    Not affected
   Vulnerability Retbleed:                  Not affected
   Vulnerability Spec rstack overflow:      Not affected
   Vulnerability Spec store bypass:         Mitigation; Speculative Store Bypass disabled via prctl
   Vulnerability Spectre v1:                Mitigation; __user pointer sanitization
   Vulnerability Spectre v2:                Not affected
   Vulnerability Srbds:                     Not affected
   Vulnerability Tsa:                       Not affected
   Vulnerability Tsx async abort:           Not affected
   Vulnerability Vmscape:                   Not affected

 From lscpu --cache:
      NAME ONE-SIZE ALL-SIZE WAYS TYPE        LEVEL SETS PHY-LINE COHERENCY-SIZE
      L1d       64K      12M    4 Data            1  256                      64
      L1i       16K       3M    4 Instruction     1   64                      64
      L2         2M     384M    8 Unified         2 4096                      64

 ------------------------------------------------------------
 8. numactl --hardware
 NOTE: a numactl 'node' might or might not correspond to a physical chip.
   available: 4 nodes (0-3)
   node 0 cpus: 0-47
   node 0 size: 195947 MB
   node 0 free: 189432 MB
   node 1 cpus: 48-95
   node 1 size: 196403 MB
   node 1 free: 189586 MB
   node 2 cpus: 96-143
   node 2 size: 196403 MB
   node 2 free: 192659 MB
   node 3 cpus: 144-191
   node 3 size: 196211 MB
   node 3 free: 191565 MB
   node distances:
   node     0    1    2    3
      0:   10   11   11   12
      1:   11   10   12   11
      2:   11   12   10   11
      3:   12   11   11   10

 ------------------------------------------------------------
 9. /proc/meminfo
    MemTotal:       803806272 kB

 'who -r' did not return a run level

 ------------------------------------------------------------
 10. Systemd service manager version: systemd 258 (258-1.fc43)
   Default Target  Status
   multi-user      running

 ------------------------------------------------------------
 11. Services, from systemctl list-unit-files
   STATE            UNIT FILES
   enabled          ModemManager NetworkManager NetworkManager-dispatcher abrt-journal-core abrt-oops
                    abrt-vmcore abrt-xorg abrtd atd audit-rules auditd authselect-apply-changes bluetooth
                    crond dbus-broker fips-crypto-policy-overlay firewalld getty@ irqbalance iscsi-onboot
                    iscsi-starter lm_sensors lvm2-monitor mdmonitor multipathd rpmdb-rebuild rsyslog
                    rtkit-daemon selinux-autorelabel-mark smartd sshd sssd systemd-boot-clear-sysfail
                    systemd-confext systemd-resolved systemd-sysext systemd-tpm2-clear tuned udisks2 upower
   enabled-runtime  systemd-remount-fs
   disabled         NetworkManager-wait-online abrt-pstoreoops arp-ethers blk-availability
                    canberra-system-bootup canberra-system-shutdown canberra-system-shutdown-reboot
                    chrony-wait chronyd chronyd-restricted console-getty containerd cpupower debug-shell
                    dnf-system-upgrade dnf5-offline-transaction dnsmasq docker fancontrol fsidd gssproxy
                    iscsi-init iscsid iscsiuio kvm_stat lastlog2-import low-memory-monitor lvm-devices-import
                    man-db-restart-cache-update netavark-dhcp-proxy netavark-firewalld-reload
                    netavark-nftables-reload nfs-blkmap nfs-server nftables nis-domainname
                    nvmefc-boot-connections nvmf-autoconnect openhpid podman podman-auto-update
                    podman-clean-transient podman-kube@ podman-restart psacct rmtfs rpcbind
                    selinux-check-proper-disable ssh-host-keys-migration sshd-keygen@ svnserve
                    systemd-boot-check-no-failures systemd-boot-update systemd-homed systemd-homed-activate
                    systemd-homed-firstboot systemd-network-generator systemd-oomd systemd-pcrlock-file-system
                    systemd-pcrlock-firmware-code systemd-pcrlock-firmware-config systemd-pcrlock-machine-id
                    systemd-pcrlock-make-policy systemd-pcrlock-secureboot-authority
                    systemd-pcrlock-secureboot-policy systemd-pstore systemd-time-wait-sync systemd-timesyncd
                    systemd-udev-load-credentials systemd-userdb-load-credentials wpa_supplicant zvbid
   indirect         iscsi pcscd serial-getty@ sshd@ sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh
                    sssd-sudo systemd-sysupdate systemd-sysupdate-reboot systemd-userdbd

 ------------------------------------------------------------
 12. Linux kernel boot-time arguments, from /proc/cmdline
   BOOT_IMAGE=(hd5,gpt2)/vmlinuz-6.17.5-200.64K_PS.fc42.aarch64
   root=/dev/mapper/fedora-root
   ro
   rd.lvm.lv=fedora/root
   nokaslr
   kaslr.disabled=1
   nohz=on
   nohz_full=0-191

 ------------------------------------------------------------
 13. cpupower frequency-info
   analyzing CPU 4:
     current policy: frequency should be within 1000 MHz and 3.20 GHz.
                     The governor "performance" may decide which speed to use
                     within this range.

 ------------------------------------------------------------
 14. tuned-adm active
   No current active profile.

 ------------------------------------------------------------
 15. sysctl
   kernel.numa_balancing               0
   kernel.randomize_va_space           2
   vm.compaction_proactiveness        20
   vm.dirty_background_bytes           0
   vm.dirty_background_ratio          10
   vm.dirty_bytes                      0
   vm.dirty_expire_centisecs        3000
   vm.dirty_ratio                      8
   vm.dirty_writeback_centisecs      500
   vm.dirtytime_expire_seconds     43200
   vm.extfrag_threshold              500
   vm.min_unmapped_ratio               1
   vm.nr_hugepages                     0
   vm.nr_hugepages_mempolicy           0
   vm.nr_overcommit_hugepages          0
   vm.swappiness                       1
   vm.watermark_boost_factor       15000
   vm.watermark_scale_factor          10
   vm.zone_reclaim_mode                1

 ------------------------------------------------------------
 16. /sys/kernel/mm/transparent_hugepage
   defrag          always defer defer+madvise madvise [never]
   enabled         always madvise [never]
   hpage_pmd_size  536870912
   shmem_enabled   always within_size advise [never] deny force

 ------------------------------------------------------------
 17. /sys/kernel/mm/transparent_hugepage/khugepaged
   alloc_sleep_millisecs   60000
   defrag                      1
   max_ptes_none            8191
   max_ptes_shared          4096
   max_ptes_swap            1024
   pages_to_scan           65536
   scan_sleep_millisecs    10000

 ------------------------------------------------------------
 18. OS release
   From /etc/*-release /etc/*-version
   os-release     Fedora Linux 43 (Server Edition)
   fedora-release Fedora release 43 (Forty Three)
   redhat-release Fedora release 43 (Forty Three)
   system-release Fedora release 43 (Forty Three)

 ------------------------------------------------------------
 19. Disk information
 SPEC is set to: /home/amptest/workspace/sir2026_pkg_verify/ampere_spec2026/spec2026
   Filesystem              Type  Size  Used Avail Use% Mounted on
   /dev/mapper/fedora-root xfs   891G  245G  647G  28% /

 ------------------------------------------------------------
 20. /sys/devices/virtual/dmi/id
     Vendor:         GIGACOMPUTING
     Product:        R2A3-T40-AAV1
     Product Family: R2A3-T40-AAV1
     Serial:         0000000000000000000000000001

 ------------------------------------------------------------
 21. dmidecode
   Additional information from dmidecode 3.6 follows.  WARNING: Use caution when you interpret this section.
   The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
   determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
   "DMTF SMBIOS" standard.
   Memory:
     12x Micron Technology MTC40F2046S1RC56BD2 MLCC 64 GB 2 rank 5600


 ------------------------------------------------------------
 22. BIOS
 (This section combines info from /sys/devices and dmidecode.)
    BIOS Vendor:       Ampere Computing LLC
    BIOS Version:      5.4.5.1
    BIOS Date:         10/22/2025
    BIOS Revision:     5.37

Compiler Version Notes

==============================================================================
C      | 708.sqlite_r(base, peak) 714.cpython_r(base, peak) 777.zstd_r(base,
       | peak)
------------------------------------------------------------------------------
gcc (GCC) 15.2.0
Copyright (C) 2025 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

==============================================================================
C++    | 706.stockfish_r(base, peak) 707.ntest_r(base, peak)
       | 727.cppcheck_r(base, peak) 753.ns3_r(base, peak)
------------------------------------------------------------------------------
g++ (GCC) 15.2.0
Copyright (C) 2025 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

==============================================================================
C++, C | 710.omnetpp_r(base pass 0, peak pass 1, peak pass 2) 721.gcc_r(base
       | pass 0, peak pass 1, peak pass 2) 723.llvm_r(base pass 0, peak pass
       | 1, peak pass 2) 729.abc_r(base pass 0, peak pass 1, peak pass 2)
       | 734.vpr_r(base pass 0, peak pass 1, peak pass 2) 735.gem5_r(base
       | pass 0, peak pass 1, peak pass 2) 750.sealcrypto_r(base pass 0, peak
       | pass 0)
------------------------------------------------------------------------------
g++ (GCC) 15.2.0
Copyright (C) 2025 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

==============================================================================
C++, C | 710.omnetpp_r(base pass 0, peak pass 1, peak pass 2) 721.gcc_r(base
       | pass 0, peak pass 1, peak pass 2) 723.llvm_r(base pass 0, peak pass
       | 1, peak pass 2) 729.abc_r(base pass 0, peak pass 1, peak pass 2)
       | 734.vpr_r(base pass 0, peak pass 1, peak pass 2) 735.gem5_r(base
       | pass 0, peak pass 1, peak pass 2) 750.sealcrypto_r(base pass 0, peak
       | pass 0)
------------------------------------------------------------------------------
gcc (GCC) 15.2.0
Copyright (C) 2025 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

==============================================================================
C++, C | 710.omnetpp_r(base pass 0, peak pass 1, peak pass 2) 721.gcc_r(base
       | pass 0, peak pass 1, peak pass 2) 723.llvm_r(base pass 0, peak pass
       | 1, peak pass 2) 729.abc_r(base pass 0, peak pass 1, peak pass 2)
       | 734.vpr_r(base pass 0, peak pass 1, peak pass 2) 735.gem5_r(base
       | pass 0, peak pass 1, peak pass 2) 750.sealcrypto_r(base pass 0, peak
       | pass 0)
------------------------------------------------------------------------------
g++ (GCC) 15.2.0
Copyright (C) 2025 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

==============================================================================
C++, C | 710.omnetpp_r(base pass 0, peak pass 1, peak pass 2) 721.gcc_r(base
       | pass 0, peak pass 1, peak pass 2) 723.llvm_r(base pass 0, peak pass
       | 1, peak pass 2) 729.abc_r(base pass 0, peak pass 1, peak pass 2)
       | 734.vpr_r(base pass 0, peak pass 1, peak pass 2) 735.gem5_r(base
       | pass 0, peak pass 1, peak pass 2) 750.sealcrypto_r(base pass 0, peak
       | pass 0)
------------------------------------------------------------------------------
gcc (GCC) 15.2.0
Copyright (C) 2025 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 gcc 

C++ benchmarks:

 g++ 

Benchmarks using both C and C++:

 g++   gcc 

Base Portability Flags

710.omnetpp_r:  -fno-finite-math-only 
734.vpr_r:  -fno-finite-math-only 
735.gem5_r:  -fno-finite-math-only 

Base Optimization Flags

C benchmarks:

 -mabi=lp64   -std=c18   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -u malloc   -ljemalloc 

C++ benchmarks:

706.stockfish_r:  -mabi=lp64   -std=c++17   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -pthread   -u malloc   -ljemalloc_ext 
707.ntest_r:  -mabi=lp64   -std=c++17   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -u malloc   -ljemalloc_ext 
727.cppcheck_r:  Same as 707.ntest_r 
753.ns3_r:  Same as 707.ntest_r 

Benchmarks using both C and C++:

710.omnetpp_r:  -mabi=lp64   -std=c++17   -std=c18   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -u malloc   -ljemalloc_ext 
721.gcc_r:  Same as 710.omnetpp_r 
723.llvm_r:  -mabi=lp64   -std=c++17   -std=c18   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -pthread   -u malloc   -ljemalloc_ext 
729.abc_r:  Same as 710.omnetpp_r 
734.vpr_r:  Same as 710.omnetpp_r 
735.gem5_r:  Same as 723.llvm_r 
750.sealcrypto_r:  Same as 710.omnetpp_r 

Base Other Flags

C benchmarks:

 -w   -Wl,-Map,mapfile 

C++ benchmarks:

 -Wl,-Map,mapfile 

Benchmarks using both C and C++:

 -w   -Wl,-Map,mapfile 

Peak Compiler Invocation

C benchmarks:

 gcc 

C++ benchmarks:

 g++ 

Benchmarks using both C and C++:

 g++   gcc 

Peak Portability Flags

710.omnetpp_r:  -fno-finite-math-only 
734.vpr_r:  -fno-finite-math-only 
735.gem5_r:  -fno-finite-math-only 

Peak Optimization Flags

C benchmarks:

 -mabi=lp64   -std=c18   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -fprofile-partial-training   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -u malloc   -ljemalloc 

C++ benchmarks:

706.stockfish_r:  -mabi=lp64   -std=c++17   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -fprofile-partial-training   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -pthread   -u malloc   -ljemalloc_ext 
707.ntest_r:  basepeak = yes 
727.cppcheck_r:  -mabi=lp64   -std=c++17   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -fprofile-partial-training   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -u malloc   -ljemalloc_ext 
753.ns3_r:  Same as 727.cppcheck_r 

Benchmarks using both C and C++:

710.omnetpp_r:  -mabi=lp64   -std=c++17   -std=c18   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -fprofile-partial-training   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -u malloc   -ljemalloc_ext 
721.gcc_r:  Same as 710.omnetpp_r 
723.llvm_r:  -mabi=lp64   -std=c++17   -std=c18   -Wl,-allow-multiple-definition   -static   -fwhole-program   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib64   -L/home/amptest/ampere_spec2026/spec2026/gcc/install/lib   -L/home/amptest/ampere_spec2026/spec2026/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -fprofile-partial-training   -g   -Ofast   -mcpu=ampere1a   -flto=32   -funroll-loops   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -pthread   -u malloc   -ljemalloc_ext 
729.abc_r:  Same as 710.omnetpp_r 
734.vpr_r:  Same as 710.omnetpp_r 
735.gem5_r:  Same as 723.llvm_r 
750.sealcrypto_r:  basepeak = yes 

Peak Other Flags

C benchmarks:

 -w   -Wl,-Map,mapfile 

C++ benchmarks:

 -Wl,-Map,mapfile 

Benchmarks using both C and C++:

 -w   -Wl,-Map,mapfile 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2026/results/flags/gcc-rev-A2.html,
http://www.spec.org/cpu2026/results/flags/GIGA-BYTE-platform-settings-AmpereOneM-rev.1.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2026/results/flags/gcc-rev-A2.xml,
http://www.spec.org/cpu2026/results/flags/GIGA-BYTE-platform-settings-AmpereOneM-rev.1.xml.

PTDaemon, SPEC CPU, and SPECrate are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders.

For questions about this result, please contact the tester. For other inquiries, please contact info@spec.org
Copyright 2026 Standard Performance Evaluation Corporation
Tested with SPEC CPU®2026 v0.902.0 on 2026-02-04 14:21:16-0500.
Report generated on 2026-05-04 23:26:59 by SPEC CPU®2026 HTML formatter (f598b8d7).
Originally published on 2026-05-05.