SPEC CPU®2026 Integer Speed Result

Copyright 2026 Standard Performance Evaluation Corporation

Dell Inc.

PowerEdge R770 (Intel Xeon 6787P)

SPECspeed®2026_int_base = 4.05

SPECspeed®2026_int_energy_base = 1.32

SPECspeed®2026_int_peak = 4.09

SPECspeed®2026_int_energy_peak = 1.34

CPU2026 License: 6573 Test Date: Feb-2026
Test Sponsor: Dell Inc. Hardware Availability: Mar-2025
Tested by: Dell Inc. Software Availability: Nov-2025
Benchmark results graph
Hardware
CPU Name: Intel Xeon 6787P
  Max MHz: 3800
  Nominal: 2000
Enabled: 172 cores, 2 chips
Orderable: 1,2 chips
Cache L1: 64 KB I + 48 KB D on chip per core
  L2: 2 MB I+D on chip per core
  L3: 336 MB I+D on chip per chip
  Other: None
Memory: 1 TB (16 x 64 GB 2Rx4 PC5-6400B-R, running at
4800)
Storage: 120 GB on tmpfs
Cooling: Air
Other: None
Software
OS: SUSE Linux Enterprise Server 15 SP6
6.4.0-150600.21-default
Compiler: C/C++: Version 2025.3 of Intel oneAPI DPC++/C++
Compiler for Linux;
Fortran: Version 2025.3 of Intel Fortran
Compiler for Linux
Compiler Category: Vendor
Firmware: Version 1.6.4 released Nov-2025
File System: tmpfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc memory allocator v5.3
Power Management: BIOS and OS set to balanced performance
Power
Max. Power (W): 769.6
Idle Power (W): 180.55
Min. Temperature (C): 21.50
Elevation (m): 255
Line Standard: 220 V / 50 Hz / 1 phase / 3 wires
Provisioning: Line-powered
Power Settings
Management FW: Version 1.20.80.50 of IDRAC
Memory Mode: Normal
Power-Relevant Hardware
Power Supply: 1 x 1500 W (non-redundant)
  Details: 1500W Titanium Power supply DPN 1PKMH
Backplane: 8 x EDSFF E3.S NVMe
Other Storage: 1 x NVMe E3 Drive
Storage Model #s: NVMe PM1745 MU E3.S 3.2TB
NICs Installed: 1 x Intel E610-XT2 @ 10 Gbps (Dell P/N FC0HK)
NICs Enabled (FW/OS): 2 / 1
NICs Connected/Speed: 1 @ 10 Gb
Other HW Model #s: 6 x performance fans
Power Analyzer
Power Analyzer: 192.168.0.5:8888
Hardware Vendor: Yokogawa Meters and Instruments Corporation
Model: YokogawaWT310E
Serial Number: T11733386
Input Connection: Default
Metrology Institute: Tescom
Calibration By: NIST
Calibration Label: T126623
Calibration Date: 13-Aug-2025
PTDaemon® Version: 1.11.4 (5bcc369b; 2026-01-19)
Setup Description: Connected to PSU1
Current Ranges Used: 10A
Voltage Range Used: 300V
Temperature Meter
Temperature Meter: 192.168.0.5:8889
Hardware Vendor: Digi International Inc.
Model: DigiWATCHPORT_H
Serial Number: W13370940
Input Connection: USB
PTDaemon Version: 1.11.4 (5bcc369b; 2026-01-19)
Setup Description: 25 mm in front of SUT main airflow intake

Base Results Table

Benchmark Threads Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
801.xz_s 172 3430 1.72 1230 0.676 358 650 3440 1.72 1280 0.649 371 659
807.ntest_s 172 1060 10.70 63.9 3.630 600 647 1060 10.70 63.7 3.640 599 647
817.flac_s 172 5860 2.96 1970 0.944 336 385 5830 2.98 2000 0.931 343 384
821.gcc_s 172 1470 14.10 96.4 4.410 655 700 1470 14.10 96.6 4.400 657 702
823.llvm_s 172 1110 12.70 77.1 3.800 696 729 1110 12.70 77.3 3.790 698 731
827.cppcheck_s 172 1750 6.41 95.7 2.540 548 770 1750 6.38 96.2 2.520 549 768
829.abc_s 172 4900 1.69 1460 0.476 298 351 4910 1.69 1500 0.464 306 350
834.vpr_s 172 4250 2.25 1220 0.657 287 291 4230 2.26 1220 0.659 288 291
835.gem5_s 172 4460 2.55 1280 0.754 288 290 4490 2.54 1290 0.749 287 290
838.diamond_s 172 1910 5.23 85.6 2.340 448 603 1890 5.31 84.8 2.360 450 602
846.minizinc_s 172 5590 1.20 1790 0.350 320 348 5690 1.18 1840 0.342 322 348
853.ns3_s 172 3610 3.19 1070 0.923 297 344 3640 3.17 1090 0.912 299 344
854.graph500_s 172 89.8 6.80 52.6 2.470 585 728 88.7 6.89 52.0 2.500 586 727
SPECspeed®2026_int_base 4.05
SPECspeed®2026_int_energy_base 1.32
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.

Peak Results Table

Benchmark Threads Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
801.xz_s 172 3430 1.72 1230 0.676 358 650 3440 1.72 1280 0.649 371 659
807.ntest_s 172 1060 10.70 63.9 3.630 600 647 1060 10.70 63.7 3.640 599 647
817.flac_s 172 5860 2.96 1970 0.944 336 385 5830 2.98 2000 0.931 343 384
821.gcc_s 172 1470 14.10 96.4 4.410 655 700 1470 14.10 96.6 4.400 657 702
823.llvm_s 172 1110 12.70 76.9 3.810 693 731 1100 12.80 76.9 3.810 697 732
827.cppcheck_s 172 1750 6.41 95.7 2.540 548 770 1750 6.38 96.2 2.520 549 768
829.abc_s 172 4900 1.69 1460 0.476 298 351 4910 1.69 1500 0.464 306 350
834.vpr_s 172 4250 2.25 1220 0.657 287 291 4230 2.26 1220 0.659 288 291
835.gem5_s 172 3980 2.86 1140 0.845 287 290 3990 2.85 1150 0.843 287 290
838.diamond_s 172 1900 5.28 86.5 2.320 456 616 1900 5.26 86.4 2.320 454 617
846.minizinc_s 172 5590 1.20 1790 0.350 320 348 5690 1.18 1840 0.342 322 348
853.ns3_s 172 3610 3.19 1070 0.923 297 344 3640 3.17 1090 0.912 299 344
854.graph500_s 172 89.8 6.80 52.6 2.470 585 728 88.7 6.89 52.0 2.500 586 727
SPECspeed®2026_int_peak 4.09
SPECspeed®2026_int_energy_peak 1.34
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/mnt/ramdisk/cpu2026rc2/lib"
MALLOC_CONF = "retain:true"
OMP_STACKSIZE = "192M"

General Notes

 Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM
 memory using CentOS Stream 9.
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches
 jemalloc, a general purpose malloc implementation
 built with the CentOS Stream 9, and the system compiler gcc 11.5.0
 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases
 Benchmark run from a 120 GB ramdisk created with the cmd: "mount -t tmpfs -o size=120G tmpfs /mnt/ramdisk"

Platform Notes


 BIOS Settings:
          Logical Processor : Disabled
  Virtualization Technology : Disabled
        Hardware Prefetcher : Disabled
           Sub NUMA Cluster : Enabled
      MADT Core Enumeration : Linear

             System Profile : Custom
       CPU Power Management : OS DBPM
           Memory Frequency : Maximum Reliability
                Turbo Boost : Disabled
     Energy Efficient Turbo : Disabled
     Latency Optimized Mode : Enabled
    Energy Efficient Policy : Energy Efficient
              ADDDC Setting : Disabled
        DIMM Self Healing -
 on Uncorrectable Memory Error : Disabled

 Sysinfo program /mnt/ramdisk/cpu2026rc2/bin/sysinfo
 Rev: 069f95da7e7f5d81b2ce48a82150e54f
 running on B2KQ54-R770 Thu Feb  5 20:10:44 2026

 SUT (System Under Test) info as seen by some common utilities.

 ------------------------------------------------------------
 Table of contents
 ------------------------------------------------------------
  1. uname -srvm
  2. w
  3. Username
  4. ulimit -a
  5. sysinfo process ancestry
  6. /proc/cpuinfo
  7. lscpu
  8. numactl --hardware
  9. /proc/meminfo
 10. who -r
 11. Systemd service manager version: systemd 254 (254.10+suse.84.ge8d77af424)
 12. Services, from systemctl list-unit-files
 13. Linux kernel boot-time arguments, from /proc/cmdline
 14. cpupower frequency-info
 15. sysctl
 16. /sys/kernel/mm/transparent_hugepage
 17. /sys/kernel/mm/transparent_hugepage/khugepaged
 18. OS release
 19. Disk information
 20. /sys/devices/virtual/dmi/id
 21. dmidecode
 22. BIOS
 ------------------------------------------------------------

 ------------------------------------------------------------
 1. uname -srvm
   Linux 6.4.0-150600.21-default #1 SMP PREEMPT_DYNAMIC Thu May 16 11:09:22 UTC 2024 (36c1e09) x86_64

 ------------------------------------------------------------
 2. w
    20:10:44 up  4:24,  1 user,  load average: 1.30, 23.39, 62.31
   USER     TTY      FROM             LOGIN@   IDLE   JCPU   PCPU WHAT
   root     tty1     -                15:47   44.00s  2.84s  0.00s /bin/bash
   /home/DellFiles/bin/Intel/dell-run-speccpu.sh speed --define DL-VERS=7.0_T01 --output_format html,pdf,txt

 ------------------------------------------------------------
 3. Username
   From environment variable $USER:  root

 ------------------------------------------------------------
 4. ulimit -a
   core file size          (blocks, -c) unlimited
   data seg size           (kbytes, -d) unlimited
   scheduling priority             (-e) 0
   file size               (blocks, -f) unlimited
   pending signals                 (-i) 4126573
   max locked memory       (kbytes, -l) 8192
   max memory size         (kbytes, -m) unlimited
   open files                      (-n) 1024
   pipe size            (512 bytes, -p) 8
   POSIX message queues     (bytes, -q) 819200
   real-time priority              (-r) 0
   stack size              (kbytes, -s) unlimited
   cpu time               (seconds, -t) unlimited
   max user processes              (-u) 4126573
   virtual memory          (kbytes, -v) unlimited
   file locks                      (-x) unlimited

 ------------------------------------------------------------
 5. sysinfo process ancestry
  /usr/lib/systemd/systemd --switched-root --system --deserialize=42
  login -- root
  -bash
  /bin/bash /home/DellFiles/bin/DELL_speed.sh
  /bin/bash /home/DellFiles/bin/dell-run-main.sh speed
  /bin/bash /home/DellFiles/bin/dell-run-main.sh speed
  /bin/bash /home/DellFiles/bin/Intel/dell-run-speccpu.sh speed --define DL-VERS=7.0_T01 --output_format
    html,pdf,txt
  /bin/bash /home/DellFiles/bin/Intel/dell-run-speccpu.sh speed --define DL-VERS=7.0_T01 --output_format
    html,pdf,txt
  runcpu --nobuild --reportable --action validate --define default-platform-flags -c
    ic2025.3-graniterapids-cpu2026-0.902-speed-20260121.cfg --threads 172 --define cores=172 --tune base,peak
    -o all --define intspeedaffinity --define drop_caches --iterations 2 --define DL-VERS=7.0_T01
    --output_format html,pdf,txt intspeed
  runcpu --nobuild --reportable --action validate --define default-platform-flags --configfile
    ic2025.3-graniterapids-cpu2026-0.902-speed-20260121.cfg --threads 172 --define cores=172 --tune base,peak
    --output_format all --define intspeedaffinity --define drop_caches --iterations 2 --define DL-VERS=7.0_T01
    --output_format html,pdf,txt --runmode speed --tune base:peak --size refspeed intspeed --nopreenv
    --note-preenv --logfile $SPEC/tmp/CPU2026.001/templogs/preenv.intspeed.001.0.log --lognum 001.0
    --from_runcpu 2
  specperl $SPEC/bin/sysinfo
 $SPEC = /mnt/ramdisk/cpu2026rc2

 ------------------------------------------------------------
 6. /proc/cpuinfo
     model name      : Intel(R) Xeon(R) 6787P
     vendor_id       : GenuineIntel
     cpu family      : 6
     model           : 173
     stepping        : 1
     microcode       : 0x10003f3
     bugs            : spectre_v1 spectre_v2 spec_store_bypass swapgs bhi
     cpu cores       : 86
     siblings        : 86
     2 physical ids (chips)
     172 processors (hardware threads)
     physical id 0: core ids 0-42,64-106
     physical id 1: core ids 0-42,64-106
     physical id 0: apicids
     0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72
     ,74,76,78,80,82,84,128,130,132,134,136,138,140,142,144,146,148,150,152,154,156,158,160,162,164,166,168,17
     0,172,174,176,178,180,182,184,186,188,190,192,194,196,198,200,202,204,206,208,210,212
     physical id 1: apicids
     256,258,260,262,264,266,268,270,272,274,276,278,280,282,284,286,288,290,292,294,296,298,300,302,304,306,3
     08,310,312,314,316,318,320,322,324,326,328,330,332,334,336,338,340,384,386,388,390,392,394,396,398,400,40
     2,404,406,408,410,412,414,416,418,420,422,424,426,428,430,432,434,436,438,440,442,444,446,448,450,452,454
     ,456,458,460,462,464,466,468
   Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for
   virtualized systems.  Use the above data carefully.

 ------------------------------------------------------------
 7. lscpu

 From lscpu from util-linux 2.39.3:
   Architecture:                         x86_64
   CPU op-mode(s):                       32-bit, 64-bit
   Address sizes:                        52 bits physical, 57 bits virtual
   Byte Order:                           Little Endian
   CPU(s):                               172
   On-line CPU(s) list:                  0-171
   Vendor ID:                            GenuineIntel
   BIOS Vendor ID:                       Intel
   Model name:                           Intel(R) Xeon(R) 6787P
   BIOS Model name:                      Intel(R) Xeon(R) 6787P  CPU @ 2.0GHz
   BIOS CPU family:                      179
   CPU family:                           6
   Model:                                173
   Thread(s) per core:                   1
   Core(s) per socket:                   86
   Socket(s):                            2
   Stepping:                             1
   CPU(s) scaling MHz:                   40%
   CPU max MHz:                          2000.0000
   CPU min MHz:                          800.0000
   BogoMIPS:                             4000.00
   Flags:                                fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
                                         pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
                                         pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good
                                         nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni
                                         pclmulqdq dtes64 monitor ds_cpl smx est tm2 ssse3 sdbg fma cx16 xtpr
                                         pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer
                                         aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb
                                         cat_l3 cat_l2 cdp_l3 intel_ppin cdp_l2 ssbd mba ibrs ibpb stibp
                                         ibrs_enhanced fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms
                                         invpcid rtm cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma
                                         clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl xsaveopt
                                         xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
                                         cqm_mbm_local split_lock_detect user_shstk avx_vnni avx512_bf16
                                         wbnoinvd dtherm arat pln pts hwp hwp_act_window hwp_epp hwp_pkg_req
                                         avx512vbmi umip pku ospke waitpkg avx512_vbmi2 gfni vaes vpclmulqdq
                                         avx512_vnni avx512_bitalg tme avx512_vpopcntdq la57 rdpid
                                         bus_lock_detect cldemote movdiri movdir64b enqcmd fsrm md_clear
                                         serialize tsxldtrk pconfig arch_lbr ibt amx_bf16 avx512_fp16 amx_tile
                                         amx_int8 flush_l1d arch_capabilities
   L1d cache:                            8.1 MiB (172 instances)
   L1i cache:                            10.8 MiB (172 instances)
   L2 cache:                             344 MiB (172 instances)
   L3 cache:                             672 MiB (2 instances)
   NUMA node(s):                         4
   NUMA node0 CPU(s):                    0-42
   NUMA node1 CPU(s):                    43-85
   NUMA node2 CPU(s):                    86-128
   NUMA node3 CPU(s):                    129-171
   Vulnerability Gather data sampling:   Not affected
   Vulnerability Itlb multihit:          Not affected
   Vulnerability L1tf:                   Not affected
   Vulnerability Mds:                    Not affected
   Vulnerability Meltdown:               Not affected
   Vulnerability Mmio stale data:        Not affected
   Vulnerability Reg file data sampling: Not affected
   Vulnerability Retbleed:               Not affected
   Vulnerability Spec rstack overflow:   Not affected
   Vulnerability Spec store bypass:      Mitigation; Speculative Store Bypass disabled via prctl
   Vulnerability Spectre v1:             Mitigation; usercopy/swapgs barriers and __user pointer sanitization
   Vulnerability Spectre v2:             Mitigation; Enhanced / Automatic IBRS; IBPB conditional; RSB filling;
                                         PBRSB-eIBRS Not affected; BHI BHI_DIS_S
   Vulnerability Srbds:                  Not affected
   Vulnerability Tsx async abort:        Not affected

 From lscpu --cache:
      NAME ONE-SIZE ALL-SIZE WAYS TYPE        LEVEL   SETS PHY-LINE COHERENCY-SIZE
      L1d       48K     8.1M   12 Data            1     64        1             64
      L1i       64K    10.8M   16 Instruction     1     64        1             64
      L2         2M     344M   16 Unified         2   2048        1             64
      L3       336M     672M   16 Unified         3 344064        1             64

 ------------------------------------------------------------
 8. numactl --hardware
 NOTE: a numactl 'node' might or might not correspond to a physical chip.
   available: 4 nodes (0-3)
   node 0 cpus: 0-42
   node 0 size: 257600 MB
   node 0 free: 243484 MB
   node 1 cpus: 43-85
   node 1 size: 258036 MB
   node 1 free: 257318 MB
   node 2 cpus: 86-128
   node 2 size: 258036 MB
   node 2 free: 243824 MB
   node 3 cpus: 129-171
   node 3 size: 257996 MB
   node 3 free: 257341 MB
   node distances:
   node   0   1   2   3
     0:  10  12  21  21
     1:  12  10  21  21
     2:  21  21  10  12
     3:  21  21  12  10

 ------------------------------------------------------------
 9. /proc/meminfo
    MemTotal:       1056429864 kB

 ------------------------------------------------------------
 10. who -r
   run-level 3 Feb 5 15:46

 ------------------------------------------------------------
 11. Systemd service manager version: systemd 254 (254.10+suse.84.ge8d77af424)
   Default Target  Status
   multi-user      running

 ------------------------------------------------------------
 12. Services, from systemctl list-unit-files
   STATE            UNIT FILES
   enabled          YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron display-manager getty@ irqbalance
                    issue-generator kbdsettings klog lvm2-monitor nscd nvmefc-boot-connections
                    nvmf-autoconnect postfix purge-kernels rollback rsyslog smartd sshd systemd-pstore wicked
                    wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 wickedd-nanny
   enabled-runtime  systemd-remount-fs
   disabled         autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait
                    chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info
                    firewalld fsidd gpm grub2-once haveged ipmi ipmievd issue-add-ssh-keys kexec-load lunmask
                    man-db-create multipathd nfs nfs-blkmap rpcbind rpmconfigcheck rsyncd serial-getty@
                    smartd_generate_opts snmpd snmptrapd systemd-boot-check-no-failures systemd-confext
                    systemd-network-generator systemd-sysext systemd-time-wait-sync systemd-timesyncd udisks2
                    vncserver@
   indirect         systemd-userdbd wickedd

 ------------------------------------------------------------
 13. Linux kernel boot-time arguments, from /proc/cmdline
   BOOT_IMAGE=/boot/vmlinuz-6.4.0-150600.21-default
   root=UUID=02b3adac-b4ec-425b-b06d-e66675474f80
   splash=silent
   mitigations=auto
   quiet
   security=apparmor

 ------------------------------------------------------------
 14. cpupower frequency-info
   analyzing CPU 143:
     current policy: frequency should be within 800 MHz and 2.00 GHz.
                     The governor "powersave" may decide which speed to use
                     within this range.
     boost state support:
       Supported: no
       Active: no

 ------------------------------------------------------------
 15. sysctl
   kernel.numa_balancing               1
   kernel.randomize_va_space           2
   vm.compaction_proactiveness        20
   vm.dirty_background_bytes           0
   vm.dirty_background_ratio          10
   vm.dirty_bytes                      0
   vm.dirty_expire_centisecs        3000
   vm.dirty_ratio                     20
   vm.dirty_writeback_centisecs      500
   vm.dirtytime_expire_seconds     43200
   vm.extfrag_threshold              500
   vm.min_unmapped_ratio               1
   vm.nr_hugepages                     0
   vm.nr_hugepages_mempolicy           0
   vm.nr_overcommit_hugepages          0
   vm.swappiness                      60
   vm.watermark_boost_factor       15000
   vm.watermark_scale_factor          10
   vm.zone_reclaim_mode                0

 ------------------------------------------------------------
 16. /sys/kernel/mm/transparent_hugepage
   defrag          always defer defer+madvise [madvise] never
   enabled         [always] madvise never
   hpage_pmd_size  2097152
   shmem_enabled   always within_size advise [never] deny force

 ------------------------------------------------------------
 17. /sys/kernel/mm/transparent_hugepage/khugepaged
   alloc_sleep_millisecs   60000
   defrag                      1
   max_ptes_none             511
   max_ptes_shared           256
   max_ptes_swap              64
   pages_to_scan            4096
   scan_sleep_millisecs    10000

 ------------------------------------------------------------
 18. OS release
   From /etc/*-release /etc/*-version
   os-release SUSE Linux Enterprise Server 15 SP6

 ------------------------------------------------------------
 19. Disk information
 SPEC is set to: /mnt/ramdisk/cpu2026rc2
   Filesystem     Type   Size  Used Avail Use% Mounted on
   tmpfs          tmpfs  120G   13G  108G  11% /mnt/ramdisk

 ------------------------------------------------------------
 20. /sys/devices/virtual/dmi/id
     Vendor:         Dell Inc.
     Product:        PowerEdge R770
     Product Family: PowerEdge
     Serial:         5B2KQ54

 ------------------------------------------------------------
 21. dmidecode
   Additional information from dmidecode 3.4 follows.  WARNING: Use caution when you interpret this section.
   The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
   determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
   "DMTF SMBIOS" standard.
   Memory:
     16x 002C069D002C MTC40F2046S1RC64BD2 QSFF 64 GB 2 rank 6400, configured at 4800


 ------------------------------------------------------------
 22. BIOS
 (This section combines info from /sys/devices and dmidecode.)
    BIOS Vendor:       Dell Inc.
    BIOS Version:      1.6.4
    BIOS Date:         11/02/2025
    BIOS Revision:     1.6

Compiler Version Notes

==============================================================================
C      | 854.graph500_s(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2025.3.0 Build 20251010
Copyright (C) 1985-2025 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++    | 807.ntest_s(base, peak) 827.cppcheck_s(base, peak) 853.ns3_s(base,
       | peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2025.3.0 Build 20251010
Copyright (C) 1985-2025 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++, C | 801.xz_s(base, peak) 817.flac_s(base, peak) 821.gcc_s(base, peak)
       | 823.llvm_s(base, peak) 829.abc_s(base, peak) 834.vpr_s(base, peak)
       | 835.gem5_s(base, peak) 838.diamond_s(base, peak)
       | 846.minizinc_s(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2025.3.0 Build 20251010
Copyright (C) 1985-2025 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Benchmarks using both C and C++:

 icpx   icx 

Base Portability Flags

801.xz_s:  -DSPEC_LP64 
807.ntest_s:  -DSPEC_LP64 
817.flac_s:  -DSPEC_LP64 
821.gcc_s:  -DSPEC_LP64 
823.llvm_s:  -DSPEC_LP64 
827.cppcheck_s:  -DSPEC_LP64 
829.abc_s:  -DSPEC_LP64 
834.vpr_s:  -DSPEC_LP64 
835.gem5_s:  -DSPEC_LP64 
838.diamond_s:  -DSPEC_LP64 
846.minizinc_s:  -DSPEC_LP64 
853.ns3_s:  -DSPEC_LP64 
854.graph500_s:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -m64   -std=c18   -Wl,-z,muldefs   -xgraniterapids   -mprefer-vector-width=512   -O3   -ffp-model=fast   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fiopenmp   -DSPEC_OPENMP   -L/usr/local/jemalloc-5.3.0/lib   -ljemalloc 

C++ benchmarks:

807.ntest_s:  -m64   -std=c++17   -Wl,-z,muldefs   -xgraniterapids   -mprefer-vector-width=512   -O3   -ffp-model=fast   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fiopenmp   -DSPEC_OPENMP   -L/usr/local/jemalloc-5.3.0/lib   -ljemalloc 
827.cppcheck_s:  -m64   -std=c++17   -Wl,-z,muldefs   -xgraniterapids   -mprefer-vector-width=512   -O3   -ffp-model=fast   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -pthread   -L/usr/local/jemalloc-5.3.0/lib   -ljemalloc 
853.ns3_s:  -m64   -std=c++17   -Wl,-z,muldefs   -xgraniterapids   -mprefer-vector-width=512   -O3   -ffp-model=fast   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -L/usr/local/jemalloc-5.3.0/lib   -ljemalloc 

Benchmarks using both C and C++:

801.xz_s:  -m64   -std=c++17   -std=c18   -Wl,-z,muldefs   -xgraniterapids   -mprefer-vector-width=512   -O3   -ffp-model=fast   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -pthread   -L/usr/local/jemalloc-5.3.0/lib   -ljemalloc 
817.flac_s:  Same as 801.xz_s 
821.gcc_s:  -m64   -std=c++17   -std=c18   -Wl,-z,muldefs   -xgraniterapids   -mprefer-vector-width=512   -O3   -ffp-model=fast   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -L/usr/local/jemalloc-5.3.0/lib   -ljemalloc 
823.llvm_s:  Same as 801.xz_s 
829.abc_s:  Same as 821.gcc_s 
834.vpr_s:  Same as 821.gcc_s 
835.gem5_s:  Same as 801.xz_s 
838.diamond_s:  Same as 801.xz_s 
846.minizinc_s:  Same as 801.xz_s 

Peak Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Benchmarks using both C and C++:

 icpx   icx 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

854.graph500_s:  basepeak = yes 

C++ benchmarks:

807.ntest_s:  basepeak = yes 
827.cppcheck_s:  basepeak = yes 
853.ns3_s:  basepeak = yes 

Benchmarks using both C and C++:

801.xz_s:  basepeak = yes 
817.flac_s:  basepeak = yes 
821.gcc_s:  basepeak = yes 
823.llvm_s:  -m64   -std=c++17   -std=c18   -Wl,-z,muldefs   -fprofile-generate(pass 1)   -fprofile-use=default.profdata(pass 2)   -xHost(pass 1)   -ffp-model=fast   -xgraniterapids(pass 2)   -flto   -mprefer-vector-width=512   -qopt-mem-layout-trans=4   -O3   -mfpmath=sse   -funroll-loops   -pthread   -L/usr/local/jemalloc-5.3.0/lib   -ljemalloc 
829.abc_s:  basepeak = yes 
834.vpr_s:  basepeak = yes 
835.gem5_s:  Same as 823.llvm_s 
838.diamond_s:  Same as 823.llvm_s 
846.minizinc_s:  basepeak = yes 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2026/results/flags/Intel-ic2025-official-linux64-cpu2026-0.902.html,
http://www.spec.org/cpu2026/results/flags/Dell-Platform-Flags-PowerEdge-Intel-Xeon-v1.19.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2026/results/flags/Intel-ic2025-official-linux64-cpu2026-0.902.xml,
http://www.spec.org/cpu2026/results/flags/Dell-Platform-Flags-PowerEdge-Intel-Xeon-v1.19.xml.