# Invocation command line: # /home/cpu2026/bin/harness/runcpu --configfile amd_rate_aocc510_znver5_A1.cfg --tune base --reportable --iterations 3 --nopower --runmode rate --tune base --size test:train:refrate fprate # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 5.1.0 SPEC CPU 2026 Kit RC2 (0.902.0) Rate Zen5 Configuration File for 64-bit Linux # # File name : amd_rate_aocc510_znver5_A1.cfg # Creation Date : January 21 2026 # CPU 2026 Version : Kit RC2 (0.902.0) # Supported benchmarks : All Rate benchmarks (intrate, fprate) # Compiler name/version : AOCC 5.1.0 # Operating system version : Ubuntu 24.04 # Supported OS's : Ubuntu 24.04 # Hardware : AMD Venice/Turin (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 32/64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_rate_aocc510_znver5_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2026 under optimized conditions on AMD Venice/Turin-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Venice and Turin microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_rate_aocc510_znver5_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Venice/Turin-based servers with 96 cores per socket, SMT enabled and 1.5 TiB of DDR5 # memory distributed evenly among all 24 channels using 64 GiB DIMMs. # # To run the binary package on other Venice/Turin configurations, please review # "Readme.amd_rate_aocc510_znver5_A1.txt". In general, Venice/Turin CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_rate_aocc510_znver5_A1.cfg" or any # other file besides "ini_amd_rate_aocc510_znver5_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of rate copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 24.04. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 %define allow_build false # This is a temporary line until the binaries are stable: %define allow_reportable true # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc510 %define binary_package_name amd_rate_%{compiler_name}_znver5_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path /work/cpu2026/rc1/rate %define flags_file_name %{compiler_name}-flags-A1.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir %{binary_package_name}_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file names ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. The flags include file contains all of the compiler flags. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc %define port_flags_inc_file_name %{binary_package_full_name}_flags_portability.inc %define workaround_flags_inc_file_name %{binary_package_full_name}_flags_workaround.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2026 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # Necessary to avoid out-of-memory exceptions on certain SUTs: preENV_MALLOC_CONF = retain:true # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:$[top]/%{lib_dir}/lib32:%{ENV_LD_LIBRARY_PATH} # Define 32-bit library build paths: # Do NOT use $[top] with the 32-bit libraries because doing so will cause an # options checksum error triggering a xalanc recompile attempt on SUTs having # different file paths. # Do NOT change build_lib_dir after the build or it will also trigger a # rebuild of the xalanc: AMDALLOC_LIB32_PATH = %{build_path}/%{build_lib_dir}/lib32 %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_rate_aocc510_znver5_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_rate_aocc510_znver5_A1.inc # File generation code date: October 21, 2025 # File generation date/time: January 28, 2026 / 10:07:46 # # This file is automatically generated during a SPEC CPU 2026 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 96 %define physical_core_count 96 ################################################################################ # The following inc blocks set the rate copy counts and affinity settings. # # intrate benchmarks: 706.stockfish_r, 707.ntest_r, 708.sqlite_r, 710.omnetpp_r, 714.cpython_r, # 721.gcc_r, 723.llvm_r, 727.cppcheck_r, 729.abc_r, 734.vpr_r, 735.gem5_r, # 750.sealcrypto_r, 753.ns3_r, 777.zstd_r # fprate benchmarks: 709.cactus_r, 722.palm_r, 731.astcenc_r, 736.ocio_r, 737.gmsh_r, # 748.flightdm_r, 749.fotonik3d_r, 765.roms_r, 766.femflow_r, 767.nest_r, # 772.marian_r, 782.lbm_r # # Selected copy counts from '9654p' section of CPU info ################################################################################ # default copy counts: default: copies = 96 submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command ################################################################################ ################################################################################ # fprate copy counts: fprate: copies = 96 submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command ################################################################################ ################################################################################ # intrate copy counts: intrate: copies = 96 submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command ################################################################################ ################################################################################ # peak copy counts: 96 731.astcenc_r,736.ocio_r,737.gmsh_r,748.flightdm_r,767.nest_r,782.lbm_r=peak: copies = 96 submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command ################################################################################ ################################################################################ # peak copy counts: 96 710.omnetpp_r,714.cpython_r,729.abc_r,750.sealcrypto_r,753.ns3_r=peak: copies = 96 submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command ################################################################################ ################################################################################ # peak copy counts: 48 772.marian_r=peak: copies = 48 # Bind commands for assigning affinity: bind0 = numactl --localalloc --physcpubind=0 bind1 = numactl --localalloc --physcpubind=2 bind2 = numactl --localalloc --physcpubind=4 bind3 = numactl --localalloc --physcpubind=6 bind4 = numactl --localalloc --physcpubind=8 bind5 = numactl --localalloc --physcpubind=10 bind6 = numactl --localalloc --physcpubind=12 bind7 = numactl --localalloc --physcpubind=14 bind8 = numactl --localalloc --physcpubind=16 bind9 = numactl --localalloc --physcpubind=18 bind10 = numactl --localalloc --physcpubind=20 bind11 = numactl --localalloc --physcpubind=22 bind12 = numactl --localalloc --physcpubind=24 bind13 = numactl --localalloc --physcpubind=26 bind14 = numactl --localalloc --physcpubind=28 bind15 = numactl --localalloc --physcpubind=30 bind16 = numactl --localalloc --physcpubind=32 bind17 = numactl --localalloc --physcpubind=34 bind18 = numactl --localalloc --physcpubind=36 bind19 = numactl --localalloc --physcpubind=38 bind20 = numactl --localalloc --physcpubind=40 bind21 = numactl --localalloc --physcpubind=42 bind22 = numactl --localalloc --physcpubind=44 bind23 = numactl --localalloc --physcpubind=46 bind24 = numactl --localalloc --physcpubind=48 bind25 = numactl --localalloc --physcpubind=50 bind26 = numactl --localalloc --physcpubind=52 bind27 = numactl --localalloc --physcpubind=54 bind28 = numactl --localalloc --physcpubind=56 bind29 = numactl --localalloc --physcpubind=58 bind30 = numactl --localalloc --physcpubind=60 bind31 = numactl --localalloc --physcpubind=62 bind32 = numactl --localalloc --physcpubind=64 bind33 = numactl --localalloc --physcpubind=66 bind34 = numactl --localalloc --physcpubind=68 bind35 = numactl --localalloc --physcpubind=70 bind36 = numactl --localalloc --physcpubind=72 bind37 = numactl --localalloc --physcpubind=74 bind38 = numactl --localalloc --physcpubind=76 bind39 = numactl --localalloc --physcpubind=78 bind40 = numactl --localalloc --physcpubind=80 bind41 = numactl --localalloc --physcpubind=82 bind42 = numactl --localalloc --physcpubind=84 bind43 = numactl --localalloc --physcpubind=86 bind44 = numactl --localalloc --physcpubind=88 bind45 = numactl --localalloc --physcpubind=90 bind46 = numactl --localalloc --physcpubind=92 bind47 = numactl --localalloc --physcpubind=94 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak copy counts: 24 749.fotonik3d_r,765.roms_r=peak: copies = 24 # Bind commands for assigning affinity: bind0 = numactl --localalloc --physcpubind=0 bind1 = numactl --localalloc --physcpubind=4 bind2 = numactl --localalloc --physcpubind=8 bind3 = numactl --localalloc --physcpubind=12 bind4 = numactl --localalloc --physcpubind=16 bind5 = numactl --localalloc --physcpubind=20 bind6 = numactl --localalloc --physcpubind=24 bind7 = numactl --localalloc --physcpubind=28 bind8 = numactl --localalloc --physcpubind=32 bind9 = numactl --localalloc --physcpubind=36 bind10 = numactl --localalloc --physcpubind=40 bind11 = numactl --localalloc --physcpubind=44 bind12 = numactl --localalloc --physcpubind=48 bind13 = numactl --localalloc --physcpubind=52 bind14 = numactl --localalloc --physcpubind=56 bind15 = numactl --localalloc --physcpubind=60 bind16 = numactl --localalloc --physcpubind=64 bind17 = numactl --localalloc --physcpubind=68 bind18 = numactl --localalloc --physcpubind=72 bind19 = numactl --localalloc --physcpubind=76 bind20 = numactl --localalloc --physcpubind=80 bind21 = numactl --localalloc --physcpubind=84 bind22 = numactl --localalloc --physcpubind=88 bind23 = numactl --localalloc --physcpubind=92 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ # Switch back to the default block after the include file: default: ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU 2026 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2026 report header ################################################################################ license_num =3 tester =HPE test_sponsor =HPE hw_vendor =Hewlett Packard Enterprise sw_compiler_category = Vendor hw_model000 =ProLiant DL325 Gen11 hw_model001 =(2.40 GHz, AMD EPYC 9654P) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 5.1.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Aug-2023 sw_avail =Jan-2026 hw_cpu_name =AMD EPYC 9654P hw_cpu_nominal_mhz =2400 hw_cpu_max_mhz =3700 hw_ncores =96 hw_nthreadspercore =1 hw_ncpuorder =1 Chip hw_other =None # Other perf-relevant hw, or "None" fw_bios000 =HPE BIOS Version v2.90 fw_bios001 = released Jan-2026 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =384 MB I+D on chip per chip, hw_tcache001 = 32 MB shared / 8 cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC Venice256 CPU + 2TiB notes_005 =Memory using Ubuntu 24.04 notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. #notes_os_013 =Reduce jitter by disabling C2 sleep for all logical cores: #notes_os_014 ='cpupower -c 0-$LAST_CORE idle-set -d 2' run as root notes_os_015 notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v15.1.0 in Ubuntu 26.04 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 # new field for CPU 2026 denoting open source compiler: ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 500 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 500 # notes_plat_010 = NPS: 1 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C # RC1 requires a new field, hw_cooling. which describes the cooling method # used for the CPU, either "Air", "CLC", "DLC", "Not configurable", or "Other" hw_cooling =CLC ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intrate: sw_peak_ptrsize =64-bit notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_001 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_002 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fprate: sw_peak_ptrsize =64-bit notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_os_thp_015 = ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intrate,fprate: hw_memory =768 GB (12 x 64 GB 2Rx4 PC5-4800B-R) hw_nchips =1 prepared_by =HPE Performance Engineering sw_file =ext4 sw_os000 =Ubuntu 24.04.3 LTS sw_os001 =Kernel 6.8.0-90-generic sw_state =Run level 5 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2026/config/amd_rate_aocc510_znver5_A1.inc' # Switch back to default block after the include file: default: fail_build = yes # FIX THIS SO THAT CHECKSUMS WILL BE ENFORCED! %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:$[top]/%{build_lib_dir}/lib32:%{ENV_LIBRARY_PATH} % define build_ncpus 64 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ # CPU 2026 backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # after setup, force a sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes # Temporary flags file: #flagsurl = $[top]/config/flags/aocc.xml # Normal flag files: flagsurl000 = http://www.spec.org/cpu2026/results/flags/HPE-Platform-Flags-AMD-Turin-rev1.11.xml flagsurl001 = http://www.spec.org/cpu2026/results/flags/aocc-flags.2026-05-04.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} # Set default iterations to one: iterations = 1 line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak # Turn off checksums (3 lines, disables reportable runs): %if '%{allow_reportable}' eq 'false' check_md5 = 0 verify_binaries = 0 strict_rundir_verify = 0 %endif threads = 1 # EDIT to change number of OpenMP threads (see above) # keep going on failures = 1/yes: ignore_errors = 1 # set the default job count: makeflags = --jobs=%{build_ncpus} ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_rate_aocc510_znver5_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 5.1.0 SPEC CPU 2026 Kit RC2 (0.902.0) Rate Zen5 Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: # Compilers: CC = clang -m64 -std=c18 CXX = clang++ -m64 -std=c++17 FC = flang -m64 -Mstandard # Linkers: CLD = clang -m64 -std=c18 CXXLD = clang++ -m64 -std=c++17 FLD = flang -m64 -Mstandard # Version switches: CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver5 \ $(VECMATHLIB) OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto EXTRA_FLIBS = -lflang # Fortran run-time library ################################################################################ # Portability and workaround include files ################################################################################ # Portability flags include file: #include: %{port_flags_inc_file_name} # ----- Begin inclusion of 'amd_rate_aocc510_znver5_A1_flags_portability.inc' ############################################################################ ################################################################################ # AMD AOCC 5.1.0 SPEC CPU 2026 Kit RC2 (0.902.0) Rate Zen5 Portability Flags for # AMD64 Linux ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 736.ocio_r: PORTABILITY = -fno-finite-math-only 737.gmsh_r: PORTABILITY = -fno-fast-math 748.flightdm_r: PORTABILITY = -fno-reciprocal-math 767.nest_r: PORTABILITY = -fno-finite-math-only ################################################################################ # End Portability Flags ################################################################################ # ---- End inclusion of '/home/cpu2026/config/amd_rate_aocc510_znver5_A1_flags_portability.inc' # Workaround flags include file: #include: %{workaround_flags_inc_file_name} # ----- Begin inclusion of 'amd_rate_aocc510_znver5_A1_flags_workaround.inc' ############################################################################ ################################################################################ # AMD AOCC 5.1.0 SPEC CPU 2026 Kit RC2 (0.902.0) Rate Zen5 Workaround Flags for # AMD64 Linux ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: #EXTRA_CFLAGS = NONE #EXTRA_CXXFLAGS = NONE #EXTRA_FFLAGS = NONE #LDOPTIONS = NONE #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## # # *** NONE *** # ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## # # *** NONE *** # ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # # ---- End inclusion of '/home/cpu2026/config/amd_rate_aocc510_znver5_A1_flags_workaround.inc' ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -fno-PIE \ -no-pie \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -fepilog-vectorization-of-inductions \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false \ -Wl,-mllvm -Wl,-extra-inliner LDCFLAGS = -Wl,-mllvm -Wl,-ldist-scalar-expand \ -fenable-aggressive-gather LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-aggressive-gather=true \ -Wl,-mllvm -Wl,-enable-masked-gather-sequence=false # Libraries: EXTRA_LIBS = -lamdlibm \ -lm \ -lamdalloc \ -lflang EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATH_LIBS because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATH_LIBS. MATH_LIBS = ######################## # intrate tuning flags # ######################## intrate: EXTRA_CXXOPTIMIZE = -fno-PIE \ -no-pie \ -fvirtual-function-elimination \ -fvisibility=hidden LDCFLAGS = -Wl,-mllvm -Wl,-ldist-scalar-expand \ -fenable-aggressive-gather \ -Wl,-mllvm -Wl,-extra-inliner LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split # Libraries: EXTRA_LIBS = -lamdlibm \ -lm \ -lflang EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc EXTRA_FLIBS = -lamdalloc ############################ # fprate base tuning flags # ############################ fprate=base: OPTIMIZE = -ffast-math ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -fepilog-vectorization-of-inductions \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw #libraries: EXTRA_LIBS = -lamdlibm \ -lm \ -lamdalloc \ -ldl EXTRA_FLIBS = -lflang fprate=peak: EXTRA_OPTIMIZE = -ffast-math ######################################## # Benchmark specific peak tuning flags # ######################################## 736.ocio_r=peak: #lang='CXX' basepeak = yes 737.gmsh_r=peak: #lang='C,CXX' basepeak = yes 748.flightdm_r=peak: #lang='CXX' basepeak = yes 767.nest_r=peak: #lang='CXX' basepeak = yes # ---- End inclusion of '/home/cpu2026/config/amd_rate_aocc510_znver5_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:48a8d7b01266a01cbc82d54e6ed932a3aef19f427c374d8a35ccb8e3a4d4098a) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2026/bin/sysinfo notes_plat_sysinfo_010 = Rev: 069f95da7e7f5d81b2ce48a82150e54f notes_plat_sysinfo_015 = running on admin1 Wed Jan 28 10:08:01 2026 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -srvm notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 255 (255.4-1ubuntu8.12) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Disk information notes_plat_sysinfo_150 = 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_155 = 22. dmidecode notes_plat_sysinfo_160 = 23. BIOS notes_plat_sysinfo_165 = ------------------------------------------------------------ notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = 1. uname -srvm notes_plat_sysinfo_185 = Linux 6.8.0-90-generic #91-Ubuntu SMP PREEMPT_DYNAMIC Tue Nov 18 14:14:30 UTC 2025 x86_64 notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = ------------------------------------------------------------ notes_plat_sysinfo_200 = 2. w notes_plat_sysinfo_205 = 10:08:01 up 6:51, 9 users, load average: 0.14, 0.03, 0.01 notes_plat_sysinfo_210 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_215 = admin1 172.16.0.111 10:07 2:43m 0.00s 0.02s sshd: admin1 [priv] notes_plat_sysinfo_220 = admin1 172.16.0.111 10:07 2:43m 0.00s 0.02s sshd: admin1 [priv] notes_plat_sysinfo_225 = admin1 172.16.0.111 10:07 2:43m 0.00s 0.02s sshd: admin1 [priv] notes_plat_sysinfo_230 = admin1 172.16.0.111 10:07 2:43m 0.00s 0.02s sshd: admin1 [priv] notes_plat_sysinfo_235 = admin1 172.16.0.100 07:54 2:43m 0.00s 0.03s sshd: admin1 [priv] notes_plat_sysinfo_240 = admin1 172.16.0.100 07:48 2:43m 0.00s 0.06s sshd: admin1 [priv] notes_plat_sysinfo_245 = admin1 172.16.0.100 07:41 2:43m 0.00s 0.02s sshd: admin1 [priv] notes_plat_sysinfo_250 = admin1 172.16.0.100 03:23 2:43m 0.00s 0.10s sshd: admin1 [priv] notes_plat_sysinfo_255 = admin1 tty1 - 03:22 6:45m 0.08s 0.03s -bash notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = ------------------------------------------------------------ notes_plat_sysinfo_270 = 3. Username notes_plat_sysinfo_275 = From environment variable $USER: root notes_plat_sysinfo_280 = From the command 'logname': admin1 notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = ------------------------------------------------------------ notes_plat_sysinfo_295 = 4. ulimit -a notes_plat_sysinfo_300 = time(seconds) unlimited notes_plat_sysinfo_305 = file(blocks) unlimited notes_plat_sysinfo_310 = data(kbytes) unlimited notes_plat_sysinfo_315 = stack(kbytes) unlimited notes_plat_sysinfo_320 = coredump(blocks) 0 notes_plat_sysinfo_325 = memory(kbytes) unlimited notes_plat_sysinfo_330 = locked memory(kbytes) 2097152 notes_plat_sysinfo_335 = process 3094496 notes_plat_sysinfo_340 = nofiles 1024 notes_plat_sysinfo_345 = vmemory(kbytes) unlimited notes_plat_sysinfo_350 = locks unlimited notes_plat_sysinfo_355 = rtprio 0 notes_plat_sysinfo_360 = notes_plat_sysinfo_365 = ------------------------------------------------------------ notes_plat_sysinfo_370 = 5. sysinfo process ancestry notes_plat_sysinfo_375 = /sbin/init notes_plat_sysinfo_380 = sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups notes_plat_sysinfo_385 = sshd: admin1 [priv] notes_plat_sysinfo_390 = sshd: admin1@notty notes_plat_sysinfo_395 = /bin/bash $SPEC/run_fprate_sh.sh notes_plat_sysinfo_400 = sudo ./run_fprate.py notes_plat_sysinfo_405 = python3 ./run_fprate.py notes_plat_sysinfo_410 = /bin/bash ./amd_rate_aocc510_znver5_A1.sh notes_plat_sysinfo_415 = runcpu --config amd_rate_aocc510_znver5_A1.cfg --tune base --reportable --iterations 3 fprate notes_plat_sysinfo_420 = runcpu --configfile amd_rate_aocc510_znver5_A1.cfg --tune base --reportable --iterations 3 --nopower notes_plat_sysinfo_425 = --runmode rate --tune base --size test:train:refrate fprate --nopreenv --note-preenv --logfile notes_plat_sysinfo_430 = $SPEC/tmp/CPU2026.001/templogs/preenv.fprate.001.0.log --lognum 001.0 --from_runcpu 2 notes_plat_sysinfo_435 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_440 = $SPEC = /home/cpu2026 notes_plat_sysinfo_445 = notes_plat_sysinfo_450 = ------------------------------------------------------------ notes_plat_sysinfo_455 = 6. /proc/cpuinfo notes_plat_sysinfo_460 = model name : AMD EPYC 9654P 96-Core Processor notes_plat_sysinfo_465 = vendor_id : AuthenticAMD notes_plat_sysinfo_470 = cpu family : 25 notes_plat_sysinfo_475 = model : 17 notes_plat_sysinfo_480 = stepping : 1 notes_plat_sysinfo_485 = microcode : 0xa101158 notes_plat_sysinfo_490 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass srso vmscape notes_plat_sysinfo_495 = TLB size : 3584 4K pages notes_plat_sysinfo_500 = cpu cores : 96 notes_plat_sysinfo_505 = siblings : 96 notes_plat_sysinfo_510 = 1 physical ids (chips) notes_plat_sysinfo_515 = 96 processors (hardware threads) notes_plat_sysinfo_520 = physical id 0: core ids 0-95 notes_plat_sysinfo_525 = physical id 0: apicids 0-95 notes_plat_sysinfo_530 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_535 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_540 = notes_plat_sysinfo_545 = ------------------------------------------------------------ notes_plat_sysinfo_550 = 7. lscpu notes_plat_sysinfo_555 = notes_plat_sysinfo_560 = From lscpu from util-linux 2.39.3: notes_plat_sysinfo_565 = Architecture: x86_64 notes_plat_sysinfo_570 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_575 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_580 = Byte Order: Little Endian notes_plat_sysinfo_585 = CPU(s): 96 notes_plat_sysinfo_590 = On-line CPU(s) list: 0-95 notes_plat_sysinfo_595 = Vendor ID: AuthenticAMD notes_plat_sysinfo_600 = BIOS Vendor ID: Advanced Micro Devices, Inc. notes_plat_sysinfo_605 = Model name: AMD EPYC 9654P 96-Core Processor notes_plat_sysinfo_610 = BIOS Model name: AMD EPYC 9654P 96-Core Processor CPU @ 2.4GHz notes_plat_sysinfo_615 = BIOS CPU family: 107 notes_plat_sysinfo_620 = CPU family: 25 notes_plat_sysinfo_625 = Model: 17 notes_plat_sysinfo_630 = Thread(s) per core: 1 notes_plat_sysinfo_635 = Core(s) per socket: 96 notes_plat_sysinfo_640 = Socket(s): 1 notes_plat_sysinfo_645 = Stepping: 1 notes_plat_sysinfo_650 = Frequency boost: enabled notes_plat_sysinfo_655 = CPU(s) scaling MHz: 103% notes_plat_sysinfo_660 = CPU max MHz: 2400.0000 notes_plat_sysinfo_665 = CPU min MHz: 1500.0000 notes_plat_sysinfo_670 = BogoMIPS: 4792.58 notes_plat_sysinfo_675 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat notes_plat_sysinfo_680 = pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb notes_plat_sysinfo_685 = rdtscp lm constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid notes_plat_sysinfo_690 = extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid notes_plat_sysinfo_695 = sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm notes_plat_sysinfo_700 = cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch notes_plat_sysinfo_705 = osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext notes_plat_sysinfo_710 = perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba perfmon_v2 notes_plat_sysinfo_715 = ibrs ibpb stibp ibrs_enhanced vmmcall fsgsbase bmi1 avx2 smep bmi2 notes_plat_sysinfo_720 = erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma notes_plat_sysinfo_725 = clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec notes_plat_sysinfo_730 = xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_735 = user_shstk avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd notes_plat_sysinfo_740 = amd_ppin cppc amd_ibpb_ret arat npt lbrv svm_lock nrip_save tsc_scale notes_plat_sysinfo_745 = vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic notes_plat_sysinfo_750 = v_vmsave_vmload vgif x2avic v_spec_ctrl vnmi avx512vbmi umip pku notes_plat_sysinfo_755 = ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_760 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_765 = debug_swap ibpb_exit_to_user notes_plat_sysinfo_770 = Virtualization: AMD-V notes_plat_sysinfo_775 = L1d cache: 3 MiB (96 instances) notes_plat_sysinfo_780 = L1i cache: 3 MiB (96 instances) notes_plat_sysinfo_785 = L2 cache: 96 MiB (96 instances) notes_plat_sysinfo_790 = L3 cache: 384 MiB (12 instances) notes_plat_sysinfo_795 = NUMA node(s): 12 notes_plat_sysinfo_800 = NUMA node0 CPU(s): 0-7 notes_plat_sysinfo_805 = NUMA node1 CPU(s): 8-15 notes_plat_sysinfo_810 = NUMA node2 CPU(s): 16-23 notes_plat_sysinfo_815 = NUMA node3 CPU(s): 24-31 notes_plat_sysinfo_820 = NUMA node4 CPU(s): 32-39 notes_plat_sysinfo_825 = NUMA node5 CPU(s): 40-47 notes_plat_sysinfo_830 = NUMA node6 CPU(s): 48-55 notes_plat_sysinfo_835 = NUMA node7 CPU(s): 56-63 notes_plat_sysinfo_840 = NUMA node8 CPU(s): 64-71 notes_plat_sysinfo_845 = NUMA node9 CPU(s): 72-79 notes_plat_sysinfo_850 = NUMA node10 CPU(s): 80-87 notes_plat_sysinfo_855 = NUMA node11 CPU(s): 88-95 notes_plat_sysinfo_860 = Vulnerability Gather data sampling: Not affected notes_plat_sysinfo_865 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_870 = Vulnerability L1tf: Not affected notes_plat_sysinfo_875 = Vulnerability Mds: Not affected notes_plat_sysinfo_880 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_885 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_890 = Vulnerability Reg file data sampling: Not affected notes_plat_sysinfo_895 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_900 = Vulnerability Spec rstack overflow: Mitigation; Safe RET notes_plat_sysinfo_905 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl notes_plat_sysinfo_910 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_915 = Vulnerability Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP notes_plat_sysinfo_920 = disabled; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected notes_plat_sysinfo_925 = Vulnerability Srbds: Not affected notes_plat_sysinfo_930 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_935 = Vulnerability Vmscape: Mitigation; IBPB before exit to userspace notes_plat_sysinfo_940 = notes_plat_sysinfo_945 = From lscpu --cache: notes_plat_sysinfo_950 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_955 = L1d 32K 3M 8 Data 1 64 1 64 notes_plat_sysinfo_960 = L1i 32K 3M 8 Instruction 1 64 1 64 notes_plat_sysinfo_965 = L2 1M 96M 8 Unified 2 2048 1 64 notes_plat_sysinfo_970 = L3 32M 384M 16 Unified 3 32768 1 64 notes_plat_sysinfo_975 = notes_plat_sysinfo_980 = ------------------------------------------------------------ notes_plat_sysinfo_985 = 8. numactl --hardware notes_plat_sysinfo_990 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_995 = available: 12 nodes (0-11) notes_plat_sysinfo_1000= node 0 cpus: 0-7 notes_plat_sysinfo_1005= node 0 size: 64194 MB notes_plat_sysinfo_1010= node 0 free: 63510 MB notes_plat_sysinfo_1015= node 1 cpus: 8-15 notes_plat_sysinfo_1020= node 1 size: 64509 MB notes_plat_sysinfo_1025= node 1 free: 64322 MB notes_plat_sysinfo_1030= node 2 cpus: 16-23 notes_plat_sysinfo_1035= node 2 size: 64509 MB notes_plat_sysinfo_1040= node 2 free: 64244 MB notes_plat_sysinfo_1045= node 3 cpus: 24-31 notes_plat_sysinfo_1050= node 3 size: 64465 MB notes_plat_sysinfo_1055= node 3 free: 64276 MB notes_plat_sysinfo_1060= node 4 cpus: 32-39 notes_plat_sysinfo_1065= node 4 size: 64509 MB notes_plat_sysinfo_1070= node 4 free: 64324 MB notes_plat_sysinfo_1075= node 5 cpus: 40-47 notes_plat_sysinfo_1080= node 5 size: 64509 MB notes_plat_sysinfo_1085= node 5 free: 64347 MB notes_plat_sysinfo_1090= node 6 cpus: 48-55 notes_plat_sysinfo_1095= node 6 size: 64509 MB notes_plat_sysinfo_1100= node 6 free: 64349 MB notes_plat_sysinfo_1105= node 7 cpus: 56-63 notes_plat_sysinfo_1110= node 7 size: 64509 MB notes_plat_sysinfo_1115= node 7 free: 64349 MB notes_plat_sysinfo_1120= node 8 cpus: 64-71 notes_plat_sysinfo_1125= node 8 size: 64509 MB notes_plat_sysinfo_1130= node 8 free: 64340 MB notes_plat_sysinfo_1135= node 9 cpus: 72-79 notes_plat_sysinfo_1140= node 9 size: 64509 MB notes_plat_sysinfo_1145= node 9 free: 64271 MB notes_plat_sysinfo_1150= node 10 cpus: 80-87 notes_plat_sysinfo_1155= node 10 size: 64509 MB notes_plat_sysinfo_1160= node 10 free: 64352 MB notes_plat_sysinfo_1165= node 11 cpus: 88-95 notes_plat_sysinfo_1170= node 11 size: 64461 MB notes_plat_sysinfo_1175= node 11 free: 64212 MB notes_plat_sysinfo_1180= node distances: notes_plat_sysinfo_1185= node 0 1 2 3 4 5 6 7 8 9 10 11 notes_plat_sysinfo_1190= 0: 10 11 11 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1195= 1: 11 10 11 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1200= 2: 11 11 10 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1205= 3: 12 12 12 10 11 11 12 12 12 12 12 12 notes_plat_sysinfo_1210= 4: 12 12 12 11 10 11 12 12 12 12 12 12 notes_plat_sysinfo_1215= 5: 12 12 12 11 11 10 12 12 12 12 12 12 notes_plat_sysinfo_1220= 6: 12 12 12 12 12 12 10 11 11 12 12 12 notes_plat_sysinfo_1225= 7: 12 12 12 12 12 12 11 10 11 12 12 12 notes_plat_sysinfo_1230= 8: 12 12 12 12 12 12 11 11 10 12 12 12 notes_plat_sysinfo_1235= 9: 12 12 12 12 12 12 12 12 12 10 11 11 notes_plat_sysinfo_1240= 10: 12 12 12 12 12 12 12 12 12 11 10 11 notes_plat_sysinfo_1245= 11: 12 12 12 12 12 12 12 12 12 11 11 10 notes_plat_sysinfo_1250= notes_plat_sysinfo_1255= ------------------------------------------------------------ notes_plat_sysinfo_1260= 9. /proc/meminfo notes_plat_sysinfo_1265= MemTotal: 792272784 kB notes_plat_sysinfo_1270= notes_plat_sysinfo_1275= ------------------------------------------------------------ notes_plat_sysinfo_1280= 10. who -r notes_plat_sysinfo_1285= run-level 5 Jan 28 03:17 notes_plat_sysinfo_1290= notes_plat_sysinfo_1295= ------------------------------------------------------------ notes_plat_sysinfo_1300= 11. Systemd service manager version: systemd 255 (255.4-1ubuntu8.12) notes_plat_sysinfo_1305= Default Target Status notes_plat_sysinfo_1310= graphical running notes_plat_sysinfo_1315= notes_plat_sysinfo_1320= ------------------------------------------------------------ notes_plat_sysinfo_1325= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1330= STATE UNIT FILES notes_plat_sysinfo_1335= enabled ModemManager apparmor apport blk-availability cloud-config cloud-final cloud-init notes_plat_sysinfo_1340= cloud-init-local console-setup cron dmesg e2scrub_reap finalrd getty@ gpu-manager notes_plat_sysinfo_1345= grub-common grub-initrd-fallback keyboard-setup lvm2-monitor multipathd notes_plat_sysinfo_1350= networkd-dispatcher open-iscsi open-vm-tools pollinate rsyslog secureboot-db setvtrgb notes_plat_sysinfo_1355= snapd sysstat systemd-networkd systemd-networkd-wait-online systemd-pstore notes_plat_sysinfo_1360= systemd-resolved thermald tuned ua-reboot-cmds ubuntu-advantage udisks2 ufw notes_plat_sysinfo_1365= unattended-upgrades vgauth notes_plat_sysinfo_1370= enabled-runtime netplan-ovs-cleanup systemd-fsck-root systemd-remount-fs notes_plat_sysinfo_1375= disabled console-getty debug-shell iscsid nftables rsync serial-getty@ ssh notes_plat_sysinfo_1380= systemd-boot-check-no-failures systemd-confext systemd-network-generator notes_plat_sysinfo_1385= systemd-networkd-wait-online@ systemd-pcrlock-file-system systemd-pcrlock-firmware-code notes_plat_sysinfo_1390= systemd-pcrlock-firmware-config systemd-pcrlock-machine-id systemd-pcrlock-make-policy notes_plat_sysinfo_1395= systemd-pcrlock-secureboot-authority systemd-pcrlock-secureboot-policy systemd-sysext notes_plat_sysinfo_1400= systemd-time-wait-sync systemd-timesyncd upower notes_plat_sysinfo_1405= indirect systemd-sysupdate systemd-sysupdate-reboot uuidd notes_plat_sysinfo_1410= masked cryptdisks cryptdisks-early hwclock multipath-tools-boot screen-cleanup sudo x11-common notes_plat_sysinfo_1415= notes_plat_sysinfo_1420= ------------------------------------------------------------ notes_plat_sysinfo_1425= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1430= BOOT_IMAGE=/boot/vmlinuz-6.8.0-90-generic notes_plat_sysinfo_1435= root=UUID=c8895b10-3344-47fb-81a4-2b6fb85bbd20 notes_plat_sysinfo_1440= ro notes_plat_sysinfo_1445= notes_plat_sysinfo_1450= ------------------------------------------------------------ notes_plat_sysinfo_1455= 14. cpupower frequency-info notes_plat_sysinfo_1460= analyzing CPU 48: notes_plat_sysinfo_1465= current policy: frequency should be within 1.50 GHz and 2.40 GHz. notes_plat_sysinfo_1470= The governor "performance" may decide which speed to use notes_plat_sysinfo_1475= within this range. notes_plat_sysinfo_1480= boost state support: notes_plat_sysinfo_1485= Supported: yes notes_plat_sysinfo_1490= Active: yes notes_plat_sysinfo_1495= Boost States: 0 notes_plat_sysinfo_1500= Total States: 3 notes_plat_sysinfo_1505= Pstate-P0: 2400MHz notes_plat_sysinfo_1510= notes_plat_sysinfo_1515= ------------------------------------------------------------ notes_plat_sysinfo_1520= 15. tuned-adm active notes_plat_sysinfo_1525= Current active profile: balanced notes_plat_sysinfo_1530= notes_plat_sysinfo_1535= ------------------------------------------------------------ notes_plat_sysinfo_1540= 16. sysctl notes_plat_sysinfo_1545= kernel.numa_balancing 1 notes_plat_sysinfo_1550= kernel.randomize_va_space 0 notes_plat_sysinfo_1555= vm.compaction_proactiveness 20 notes_plat_sysinfo_1560= vm.dirty_background_bytes 0 notes_plat_sysinfo_1565= vm.dirty_background_ratio 10 notes_plat_sysinfo_1570= vm.dirty_bytes 0 notes_plat_sysinfo_1575= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1580= vm.dirty_ratio 8 notes_plat_sysinfo_1585= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1590= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1595= vm.extfrag_threshold 500 notes_plat_sysinfo_1600= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1605= vm.nr_hugepages 0 notes_plat_sysinfo_1610= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1615= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1620= vm.swappiness 1 notes_plat_sysinfo_1625= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1630= vm.watermark_scale_factor 10 notes_plat_sysinfo_1635= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1640= notes_plat_sysinfo_1645= ------------------------------------------------------------ notes_plat_sysinfo_1650= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1655= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1660= enabled [always] madvise never notes_plat_sysinfo_1665= hpage_pmd_size 2097152 notes_plat_sysinfo_1670= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1675= notes_plat_sysinfo_1680= ------------------------------------------------------------ notes_plat_sysinfo_1685= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1690= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1695= defrag 1 notes_plat_sysinfo_1700= max_ptes_none 511 notes_plat_sysinfo_1705= max_ptes_shared 256 notes_plat_sysinfo_1710= max_ptes_swap 64 notes_plat_sysinfo_1715= pages_to_scan 4096 notes_plat_sysinfo_1720= scan_sleep_millisecs 10000 notes_plat_sysinfo_1725= notes_plat_sysinfo_1730= ------------------------------------------------------------ notes_plat_sysinfo_1735= 19. OS release notes_plat_sysinfo_1740= From /etc/*-release /etc/*-version notes_plat_sysinfo_1745= os-release Ubuntu 24.04.3 LTS notes_plat_sysinfo_1750= notes_plat_sysinfo_1755= ------------------------------------------------------------ notes_plat_sysinfo_1760= 20. Disk information notes_plat_sysinfo_1765= SPEC is set to: /home/cpu2026 notes_plat_sysinfo_1770= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1775= /dev/nvme0n1p2 ext4 438G 92G 325G 23% / notes_plat_sysinfo_1780= notes_plat_sysinfo_1785= ------------------------------------------------------------ notes_plat_sysinfo_1790= 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1795= Vendor: HPE notes_plat_sysinfo_1800= Product: ProLiant DL325 Gen11 notes_plat_sysinfo_1805= Product Family: ProLiant notes_plat_sysinfo_1810= Serial: DL325G11-008 notes_plat_sysinfo_1815= notes_plat_sysinfo_1820= ------------------------------------------------------------ notes_plat_sysinfo_1825= 22. dmidecode notes_plat_sysinfo_1830= Additional information from dmidecode 3.5 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1835= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1840= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1845= "DMTF SMBIOS" standard. notes_plat_sysinfo_1850= Memory: notes_plat_sysinfo_1855= 3x Hynix HMCG94AEBRA103N 64 GB 2 rank 4800 notes_plat_sysinfo_1860= 1x Hynix HMCG94AEBRA123N 64 GB 2 rank 4800 notes_plat_sysinfo_1865= 8x Hynix HMCG94MEBRA121N 64 GB 2 rank 4800 notes_plat_sysinfo_1870= notes_plat_sysinfo_1875= notes_plat_sysinfo_1880= ------------------------------------------------------------ notes_plat_sysinfo_1885= 23. BIOS notes_plat_sysinfo_1890= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1895= BIOS Vendor: HPE notes_plat_sysinfo_1900= BIOS Version: 2.90 notes_plat_sysinfo_1905= BIOS Date: 01/09/2026 notes_plat_sysinfo_1910= BIOS Revision: 2.90 notes_plat_sysinfo_1915= Firmware Revision: 1.70 hw_cpu_name = AMD EPYC 9654P hw_memory001 = 755.570 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 1 hw_ncores = 96 hw_nthreadspercore = 1 hw_storage = 1 x 480 GB NVMe SSD prepared_by = root (is never output, only tags rawfile) sw_file = ext4 sw_os001 = Ubuntu 24.04.3 LTS sw_state = Run level 5 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS is set to prefer performance at the power_management001 = cost of additional power usage notes_plat_000 =BIOS Configurations : Parameters are selected in the order shown below notes_plat_005 =Workload Profile set to General Throughput Compute notes_plat_010 =AMD Core Performance Boost set to Enabled notes_plat_015 =AMD SMT Option set to Disabled notes_plat_020 =Determinism Control set to Manual notes_plat_025 =Performance Determinism set to Power Deterministic notes_plat_030 =Last-Level Cache (LLC) as NUMA Node set to Enabled notes_plat_035 =NUMA memory domains per socket set to Four memory domains per socket notes_plat_040 =Memory Patrol Scrubbing set to Disabled notes_plat_045 =ACPI CST C2 Latency set to 18 microseconds notes_plat_050 =Thermal Configuration set to Maximum Cooling notes_plat_055 = Workload Profile set to Custom notes_plat_060 = Power Regulator set to OS Control Mode