|
Lenovo Global Technology ThinkSystem SR665 V3 |
SPECrate®2026_int_base = 818 |
|
SPECrate®2026_int_peak = 818 |
| CPU2026 License: | 9017 | Test Date: | Feb-2026 |
|---|---|---|---|
| Test Sponsor: | Lenovo Global Technology | Hardware Availability: | Jul-2025 |
| Tested by: | Lenovo Global Technology | Software Availability: | Jan-2026 |
| Hardware | |
|---|---|
| CPU Name: | AMD EPYC 9845 |
| Max MHz: | 3700 |
| Nominal: | 2100 |
| Enabled: | 320 cores, 2 chips, 2 threads/core |
| Orderable: | 1,2 chips |
| Cache L1: | 32 KB I + 48 KB D on chip per core |
| L2: | 1 MB I+D on chip per core |
| L3: | 320 MB I+D on chip per chip, 32 MB shared / 16 cores |
| Other: | None |
| Memory: | 1536 GB (24 x 64 GB 2Rx4 PC5-6400B-R, running at 5200) |
| Storage: | 1 x 480 GB SATA SSD |
| Cooling: | Air |
| Other: | None |
| Software | |
|---|---|
| OS: | SUSE Linux Enterprise Server 15 SP7 Kernel 6.4.0-150700.51-default |
| Compiler: | C/C++/Fortran: Version 5.1.0 of AOCC |
| Compiler Category: | Vendor |
| Firmware: | Lenovo BIOS Version KAE141G 5.81 released Jan-2026 |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| Other: | None |
| Power Management: | BIOS and OS set to balance power and performance |
| Power | |
|---|---|
| Max. Power (W): | 1118 |
| Idle Power (W): | 146.1 |
| Min. Temperature (C): | 22.25 |
| Elevation (m): | 43 |
| Line Standard: | 220 V / 50 Hz / 1 phase / 3 wires |
| Provisioning: | Line-powered |
| Power Settings | |
|---|---|
| Management FW: | Version 56.2 of KAX367O |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 1800 W (non-redundant) |
| Details: | ThinkSystem 1800W 230V Platinum Hot-Swap Gen2 Power Supply v2 4P57A78362 |
| Backplane: | 8 x 2.5-inch HDD back plane |
| Other Storage: | None |
| Storage Model #s: | 4XB7A82259 |
| NICs Installed: | 1 x ThinkSystem Ethernet 4-port Adaptor @ 1 Gb |
| NICs Enabled (FW/OS): | 4 / 1 |
| NICs Connected/Speed: | 1 @ 1 Gb |
| Other HW Model #s: | 6 x Performance fans |
| Power Analyzer | |
|---|---|
| Power Analyzer: | WIN:9888 |
| Hardware Vendor: | YOKOGAWA, Inc. |
| Model: | YokogawaWT310E |
| Serial Number: | C3UD17023E |
| Input Connection: | Default |
| Metrology Institute: | CNAS |
| Calibration By: | CEPREI Calibration and Testing Centre |
| Calibration Label: | 1GA25011731-0005 |
| Calibration Date: | 15-Sep-2025 |
| PTDaemon® Version: | 1.11.1 (462c978e; 2024-09-07) |
| Setup Description: | Connected to PSU1 |
| Current Ranges Used: | 5A |
| Voltage Range Used: | 300V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | WIN:9889 |
| Hardware Vendor: | Digi International, Inc. |
| Model: | DigiWATCHPORT_H |
| Serial Number: | W63181846 |
| Input Connection: | USB |
| PTDaemon Version: | 1.11.1 (462c978e; 2024-09-07) |
| Setup Description: | 50 mm in front of SUT main intake |
Base Results Table
| Benchmark | Copies | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 706.stockfish_r | 640 | 395 | 2040 | 359 | 191 | 908 | 1070 | 395 | 2040 | 362 | 189 | 918 | 1080 | 392 | 2060 | 361 | 190 | 922 | 1070 |
| 707.ntest_r | 640 | 413 | 917 | 314 | 101 | 760 | 804 | 413 | 917 | 315 | 101 | 763 | 808 | 412 | 919 | 316 | 101 | 766 | 807 |
| 708.sqlite_r | 640 | 533 | 634 | 463 | 61.3 | 868 | 1120 | 532 | 635 | 463 | 61.2 | 870 | 1120 | 532 | 636 | 461 | 61.5 | 867 | 1120 |
| 710.omnetpp_r | 640 | 415 | 749 | 330 | 79.4 | 795 | 950 | 409 | 761 | 327 | 80.1 | 799 | 950 | 413 | 754 | 329 | 79.5 | 798 | 957 |
| 714.cpython_r | 640 | 293 | 1050 | 256 | 100 | 873 | 1060 | 293 | 1050 | 256 | 99.9 | 874 | 1090 | 294 | 1040 | 258 | 99.5 | 876 | 1080 |
| 721.gcc_r | 640 | 748 | 587 | 603 | 61.3 | 806 | 913 | 750 | 586 | 603 | 61.4 | 804 | 910 | 748 | 587 | 601 | 61.5 | 803 | 913 |
| 723.llvm_r | 640 | 425 | 763 | 362 | 75.1 | 852 | 920 | 424 | 765 | 360 | 75.7 | 847 | 920 | 424 | 765 | 360 | 75.6 | 848 | 922 |
| 727.cppcheck_r | 640 | 345 | 666 | 307 | 62.8 | 891 | 1010 | 345 | 667 | 306 | 63.0 | 888 | 1000 | 345 | 667 | 306 | 63.1 | 888 | 1000 |
| 729.abc_r | 640 | 468 | 628 | 381 | 64.5 | 815 | 966 | 468 | 628 | 380 | 64.8 | 812 | 967 | 467 | 629 | 380 | 64.8 | 813 | 963 |
| 734.vpr_r | 640 | 473 | 624 | 395 | 62.6 | 834 | 961 | 472 | 625 | 394 | 62.7 | 835 | 964 | 475 | 622 | 394 | 62.6 | 831 | 958 |
| 735.gem5_r | 640 | 308 | 1010 | 262 | 99.4 | 851 | 963 | 306 | 1020 | 262 | 99.4 | 856 | 964 | 306 | 1020 | 262 | 99.7 | 855 | 963 |
| 750.sealcrypto_r | 640 | 427 | 804 | 407 | 71.1 | 954 | 972 | 427 | 804 | 405 | 71.4 | 950 | 970 | 426 | 805 | 406 | 71.4 | 952 | 971 |
| 753.ns3_r | 640 | 280 | 1400 | 246 | 134 | 876 | 939 | 279 | 1400 | 245 | 135 | 876 | 940 | 280 | 1400 | 245 | 135 | 873 | 941 |
| 777.zstd_r | 640 | 869 | 474 | 691 | 50.0 | 795 | 920 | 873 | 472 | 691 | 50.1 | 792 | 915 | 864 | 477 | 689 | 50.2 | 798 | 914 |
| SPECrate®2026_int_base | 818 | ||||||||||||||||||
| SPECrate®2026_int_energy_base | 81.0 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
Peak Results Table
| Benchmark | Copies | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 706.stockfish_r | 640 | 395 | 2040 | 359 | 191 | 908 | 1070 | 395 | 2040 | 362 | 189 | 918 | 1080 | 392 | 2060 | 361 | 190 | 922 | 1070 |
| 707.ntest_r | 640 | 413 | 917 | 314 | 101 | 760 | 804 | 413 | 917 | 315 | 101 | 763 | 808 | 412 | 919 | 316 | 101 | 766 | 807 |
| 708.sqlite_r | 640 | 533 | 634 | 463 | 61.3 | 868 | 1120 | 532 | 635 | 463 | 61.2 | 870 | 1120 | 532 | 636 | 461 | 61.5 | 867 | 1120 |
| 710.omnetpp_r | 640 | 415 | 749 | 330 | 79.4 | 795 | 950 | 409 | 761 | 327 | 80.1 | 799 | 950 | 413 | 754 | 329 | 79.5 | 798 | 957 |
| 714.cpython_r | 640 | 293 | 1050 | 256 | 100 | 873 | 1060 | 293 | 1050 | 256 | 99.9 | 874 | 1090 | 294 | 1040 | 258 | 99.5 | 876 | 1080 |
| 721.gcc_r | 640 | 748 | 587 | 603 | 61.3 | 806 | 913 | 750 | 586 | 603 | 61.4 | 804 | 910 | 748 | 587 | 601 | 61.5 | 803 | 913 |
| 723.llvm_r | 640 | 425 | 763 | 362 | 75.1 | 852 | 920 | 424 | 765 | 360 | 75.7 | 847 | 920 | 424 | 765 | 360 | 75.6 | 848 | 922 |
| 727.cppcheck_r | 640 | 345 | 666 | 307 | 62.8 | 891 | 1010 | 345 | 667 | 306 | 63.0 | 888 | 1000 | 345 | 667 | 306 | 63.1 | 888 | 1000 |
| 729.abc_r | 640 | 468 | 628 | 381 | 64.5 | 815 | 966 | 468 | 628 | 380 | 64.8 | 812 | 967 | 467 | 629 | 380 | 64.8 | 813 | 963 |
| 734.vpr_r | 640 | 473 | 624 | 395 | 62.6 | 834 | 961 | 472 | 625 | 394 | 62.7 | 835 | 964 | 475 | 622 | 394 | 62.6 | 831 | 958 |
| 735.gem5_r | 640 | 308 | 1010 | 262 | 99.4 | 851 | 963 | 306 | 1020 | 262 | 99.4 | 856 | 964 | 306 | 1020 | 262 | 99.7 | 855 | 963 |
| 750.sealcrypto_r | 640 | 427 | 804 | 407 | 71.1 | 954 | 972 | 427 | 804 | 405 | 71.4 | 950 | 970 | 426 | 805 | 406 | 71.4 | 952 | 971 |
| 753.ns3_r | 640 | 280 | 1400 | 246 | 134 | 876 | 939 | 279 | 1400 | 245 | 135 | 876 | 940 | 280 | 1400 | 245 | 135 | 873 | 941 |
| 777.zstd_r | 640 | 869 | 474 | 691 | 50.0 | 795 | 920 | 873 | 472 | 691 | 50.1 | 792 | 915 | 864 | 477 | 689 | 50.2 | 798 | 914 |
| SPECrate®2026_int_peak | 818 | ||||||||||||||||||
| SPECrate®2026_int_energy_peak | 81.0 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
Compiler Notes
The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/
Submit Notes
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
Operating System Notes
'ulimit -s unlimited' was used to set environment stack size limit 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. To free node-local memory and avoid remote memory usage, 'sysctl -w vm.zone_reclaim_mode=1' run as root. To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. To disable address space layout randomization (ASLR) to reduce run-to-run variability, 'sysctl -w kernel.randomize_va_space=0' run as root. To enable Transparent Hugepages (THP) for all allocations, 'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and 'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root.
Environment Variables Notes
Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
"/home/cpu2026-0.902.0-amd_aocc510_znver5_A1/amd_rate_aocc510_znver5_A_l
ib/lib:/home/cpu2026-0.902.0-amd_aocc510_znver5_A1/amd_rate_aocc510_znve
r5_A_lib/lib32:"
MALLOC_CONF = "retain:true"
General Notes
Binaries were compiled on a system with 2x AMD EPYC Venice256 CPU + 2TiB Memory using Ubuntu 24.04
Platform Notes
BIOS configuration:
Choose Operating Mode set to Custom Mode
NUMA Nodes per Socket set to NPS2
Core Performance Boost set to Disabled
Memory Speed set to 5200MHz
L1 Stride Prefetcher set to Disabled
Sysinfo program /home/cpu2026-0.902.0-amd_aocc510_znver5_A1/bin/sysinfo
Rev: 069f95da7e7f5d81b2ce48a82150e54f
running on localhost Tue Feb 3 22:06:40 2026
SUT (System Under Test) info as seen by some common utilities.
------------------------------------------------------------
Table of contents
------------------------------------------------------------
1. uname -srvm
2. w
3. Username
4. ulimit -a
5. sysinfo process ancestry
6. /proc/cpuinfo
7. lscpu
8. numactl --hardware
9. /proc/meminfo
10. who -r
11. Systemd service manager version: systemd 254 (254.24+suse.148.g83b9060b6e)
12. Services, from systemctl list-unit-files
13. Linux kernel boot-time arguments, from /proc/cmdline
14. cpupower frequency-info
15. sysctl
16. /sys/kernel/mm/transparent_hugepage
17. /sys/kernel/mm/transparent_hugepage/khugepaged
18. OS release
19. Disk information
20. /sys/devices/virtual/dmi/id
21. dmidecode
22. BIOS
------------------------------------------------------------
------------------------------------------------------------
1. uname -srvm
Linux 6.4.0-150700.51-default #1 SMP PREEMPT_DYNAMIC Wed Apr 30 21:35:43 UTC 2025 (6930611) x86_64
------------------------------------------------------------
2. w
22:06:40 up 4 min, 1 user, load average: 0.35, 0.57, 0.31
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
------------------------------------------------------------
3. Username
From environment variable $USER: root
------------------------------------------------------------
4. ulimit -a
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 6188806
max locked memory (kbytes, -l) 2097152
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) unlimited
cpu time (seconds, -t) unlimited
max user processes (-u) 6188806
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
------------------------------------------------------------
5. sysinfo process ancestry
/usr/lib/systemd/systemd --switched-root --system --deserialize=42
sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
sshd: root [priv]
sshd: root@notty
/bin/bash ./02.remote_local_SPECcpu_1.02.sh
/bin/bash ./Run022-compliant-amd-rateint_base.sh
python3 ./run_amd_rate_aocc510_znver5_A1.py
/bin/bash ./amd_rate_aocc510_znver5_A1.sh
runcpu --power --config amd_rate_aocc510_znver5_A1.cfg --tune base --reportable --iterations 3 intrate
runcpu --power --configfile amd_rate_aocc510_znver5_A1.cfg --tune base --reportable --iterations 3 --runmode
rate --tune base --size test:train:refrate intrate --nopreenv --note-preenv --logfile
$SPEC/tmp/CPU2026.017/templogs/preenv.intrate.017.0.log --lognum 017.0 --from_runcpu 2
specperl $SPEC/bin/sysinfo
$SPEC = /home/cpu2026-0.902.0-amd_aocc510_znver5_A1
------------------------------------------------------------
6. /proc/cpuinfo
model name : AMD EPYC 9845 160-Core Processor
vendor_id : AuthenticAMD
cpu family : 26
model : 17
stepping : 0
microcode : 0xb10104f
bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass srso
TLB size : 192 4K pages
cpu cores : 160
siblings : 320
2 physical ids (chips)
640 processors (hardware threads)
physical id 0: core ids 0-159
physical id 1: core ids 0-159
physical id 0: apicids 0-319
physical id 1: apicids 512-831
Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for
virtualized systems. Use the above data carefully.
------------------------------------------------------------
7. lscpu
From lscpu from util-linux 2.40.4:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 52 bits physical, 57 bits virtual
Byte Order: Little Endian
CPU(s): 640
On-line CPU(s) list: 0-639
Vendor ID: AuthenticAMD
Model name: AMD EPYC 9845 160-Core Processor
CPU family: 26
Model: 17
Thread(s) per core: 2
Core(s) per socket: 160
Socket(s): 2
Stepping: 0
CPU(s) scaling MHz: 71%
CPU max MHz: 2100.0000
CPU min MHz: 1500.0000
BogoMIPS: 4193.82
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid
extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid
sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext
perfctr_llc mwaitx cat_l3 cdp_l3 hw_pstate ssbd mba perfmon_v2 ibrs
ibpb stibp ibrs_enhanced vmmcall fsgsbase tsc_adjust bmi1 avx2 smep
bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap
avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt
xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
cqm_mbm_local user_shstk avx_vnni avx512_bf16 clzero irperf
xsaveerptr rdpru wbnoinvd amd_ppin cppc amd_ibpb_ret arat npt lbrv
svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists
pausefilter pfthreshold avic v_vmsave_vmload vgif x2avic v_spec_ctrl
vnmi avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq
avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid bus_lock_detect
movdiri movdir64b overflow_recov succor smca fsrm avx512_vp2intersect
flush_l1d debug_swap hv_inuse_wr_allowed srso_user_kernel_no
amd_lbr_pmc_freeze
Virtualization: AMD-V
L1d cache: 15 MiB (320 instances)
L1i cache: 10 MiB (320 instances)
L2 cache: 320 MiB (320 instances)
L3 cache: 640 MiB (20 instances)
NUMA node(s): 4
NUMA node0 CPU(s): 0-79,320-399
NUMA node1 CPU(s): 80-159,400-479
NUMA node2 CPU(s): 160-239,480-559
NUMA node3 CPU(s): 240-319,560-639
Vulnerability Gather data sampling: Not affected
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Not affected
Vulnerability Mds: Not affected
Vulnerability Meltdown: Not affected
Vulnerability Mmio stale data: Not affected
Vulnerability Reg file data sampling: Not affected
Vulnerability Retbleed: Not affected
Vulnerability Spec rstack overflow: Mitigation; IBPB on VMEXIT only
Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP
always-on; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
From lscpu --cache:
NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE
L1d 48K 15M 12 Data 1 64 1 64
L1i 32K 10M 8 Instruction 1 64 1 64
L2 1M 320M 16 Unified 2 1024 1 64
L3 32M 640M 16 Unified 3 32768 1 64
------------------------------------------------------------
8. numactl --hardware
NOTE: a numactl 'node' might or might not correspond to a physical chip.
available: 4 nodes (0-3)
node 0 cpus: 0-79,320-399
node 0 size: 386377 MB
node 0 free: 385365 MB
node 1 cpus: 80-159,400-479
node 1 size: 387029 MB
node 1 free: 385988 MB
node 2 cpus: 160-239,480-559
node 2 size: 387029 MB
node 2 free: 385996 MB
node 3 cpus: 240-319,560-639
node 3 size: 386791 MB
node 3 free: 385743 MB
node distances:
node 0 1 2 3
0: 10 12 32 32
1: 12 10 32 32
2: 32 32 10 12
3: 32 32 12 10
------------------------------------------------------------
9. /proc/meminfo
MemTotal: 1584361980 kB
------------------------------------------------------------
10. who -r
run-level 3 Feb 3 22:03
------------------------------------------------------------
11. Systemd service manager version: systemd 254 (254.24+suse.148.g83b9060b6e)
Default Target Status
multi-user running
------------------------------------------------------------
12. Services, from systemctl list-unit-files
STATE UNIT FILES
enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron getty@ irqbalance issue-generator
kbdsettings klog lvm2-monitor nscd postfix purge-kernels rollback rsyslog smartd sshd
systemd-pstore wicked wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 wickedd-nanny
enabled-runtime systemd-remount-fs
disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait
chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info
firewalld fsidd gpm grub2-once haveged hwloc-dump-hwdata ipmi ipmievd issue-add-ssh-keys
kexec-load lunmask man-db-create multipathd nfs nfs-blkmap rpcbind rpmconfigcheck rsyncd
serial-getty@ smartd_generate_opts snmpd snmptrapd systemd-boot-check-no-failures
systemd-confext systemd-network-generator systemd-sysext systemd-time-wait-sync
systemd-timesyncd
generated ntp_sync
indirect systemd-userdbd wickedd
------------------------------------------------------------
13. Linux kernel boot-time arguments, from /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-6.4.0-150700.51-default
root=UUID=6b4a02b3-a7c2-4def-af3d-b12e11842422
splash=silent
mitigations=auto
quiet
security=apparmor
------------------------------------------------------------
14. cpupower frequency-info
analyzing CPU 543:
current policy: frequency should be within 1.50 GHz and 2.10 GHz.
The governor "ondemand" may decide which speed to use
within this range.
boost state support:
Supported: no
Active: no
------------------------------------------------------------
15. sysctl
kernel.numa_balancing 1
kernel.randomize_va_space 0
vm.compaction_proactiveness 20
vm.dirty_background_bytes 0
vm.dirty_background_ratio 10
vm.dirty_bytes 0
vm.dirty_expire_centisecs 3000
vm.dirty_ratio 8
vm.dirty_writeback_centisecs 500
vm.dirtytime_expire_seconds 43200
vm.extfrag_threshold 500
vm.min_unmapped_ratio 1
vm.nr_hugepages 0
vm.nr_hugepages_mempolicy 0
vm.nr_overcommit_hugepages 0
vm.swappiness 1
vm.watermark_boost_factor 15000
vm.watermark_scale_factor 10
vm.zone_reclaim_mode 1
------------------------------------------------------------
16. /sys/kernel/mm/transparent_hugepage
defrag [always] defer defer+madvise madvise never
enabled [always] madvise never
hpage_pmd_size 2097152
shmem_enabled always within_size advise [never] deny force
------------------------------------------------------------
17. /sys/kernel/mm/transparent_hugepage/khugepaged
alloc_sleep_millisecs 60000
defrag 1
max_ptes_none 511
max_ptes_shared 256
max_ptes_swap 64
pages_to_scan 4096
scan_sleep_millisecs 10000
------------------------------------------------------------
18. OS release
From /etc/*-release /etc/*-version
os-release SUSE Linux Enterprise Server 15 SP7
------------------------------------------------------------
19. Disk information
SPEC is set to: /home/cpu2026-0.902.0-amd_aocc510_znver5_A1
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda3 xfs 444G 130G 315G 30% /
------------------------------------------------------------
20. /sys/devices/virtual/dmi/id
Vendor: Lenovo
Product: ThinkSystem SR665 V3
Product Family: ThinkSystem
Serial: 1234567890
------------------------------------------------------------
21. dmidecode
Additional information from dmidecode 3.6 follows. WARNING: Use caution when you interpret this section.
The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
"DMTF SMBIOS" standard.
Memory:
4x Samsung M321R8GA0PB2-CCPEC 64 GB 2 rank 6400, configured at 5200
9x Samsung M321R8GA0PB2-CCPKC 64 GB 2 rank 6400, configured at 5200
10x Samsung M321R8GA0PB2-CCPPC 64 GB 2 rank 6400, configured at 5200
1x Samsung M321R8GA0PB2-CCPWC 64 GB 2 rank 6400, configured at 5200
------------------------------------------------------------
22. BIOS
(This section combines info from /sys/devices and dmidecode.)
BIOS Vendor: Lenovo
BIOS Version: KAE141G-5.81
BIOS Date: 01/22/2026
BIOS Revision: 5.81
Firmware Revision: 56.20
Compiler Version Notes
==============================================================================
C | 708.sqlite_r(base) 714.cpython_r(base) 777.zstd_r(base)
------------------------------------------------------------------------------
AMD clang version 17.0.6 (CLANG: AOCC_5.1.0-Build#1994 2025_12_23)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-5.1.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 706.stockfish_r(base) 707.ntest_r(base) 727.cppcheck_r(base)
| 753.ns3_r(base)
------------------------------------------------------------------------------
AMD clang version 17.0.6 (CLANG: AOCC_5.1.0-Build#1994 2025_12_23)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-5.1.0/bin
------------------------------------------------------------------------------
==============================================================================
C++, C | 710.omnetpp_r(base) 721.gcc_r(base) 723.llvm_r(base) 729.abc_r(base)
| 734.vpr_r(base) 735.gem5_r(base) 750.sealcrypto_r(base)
------------------------------------------------------------------------------
AMD clang version 17.0.6 (CLANG: AOCC_5.1.0-Build#1994 2025_12_23)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-5.1.0/bin
------------------------------------------------------------------------------
Base Compiler Invocation
C benchmarks:
| clang |
C++ benchmarks:
| clang++ |
Benchmarks using both C and C++:
| clang++ clang |
Base Portability Flags
| 706.stockfish_r: | -DSPEC_LP64 |
| 707.ntest_r: | -DSPEC_LP64 |
| 708.sqlite_r: | -DSPEC_LP64 |
| 710.omnetpp_r: | -DSPEC_LP64 |
| 714.cpython_r: | -DSPEC_LP64 |
| 721.gcc_r: | -DSPEC_LP64 |
| 723.llvm_r: | -DSPEC_LP64 |
| 727.cppcheck_r: | -DSPEC_LP64 |
| 729.abc_r: | -DSPEC_LP64 |
| 734.vpr_r: | -DSPEC_LP64 |
| 735.gem5_r: | -DSPEC_LP64 |
| 750.sealcrypto_r: | -DSPEC_LP64 |
| 753.ns3_r: | -DSPEC_LP64 |
| 777.zstd_r: | -DSPEC_LP64 |
Base Optimization Flags
C benchmarks:
C++ benchmarks:
Benchmarks using both C and C++:
Peak Optimization Flags
C benchmarks:
| 708.sqlite_r: | basepeak = yes |
| 714.cpython_r: | basepeak = yes |
| 777.zstd_r: | basepeak = yes |
C++ benchmarks:
| 706.stockfish_r: | basepeak = yes |
| 707.ntest_r: | basepeak = yes |
| 727.cppcheck_r: | basepeak = yes |
| 753.ns3_r: | basepeak = yes |
Benchmarks using both C and C++:
| 710.omnetpp_r: | basepeak = yes |
| 721.gcc_r: | basepeak = yes |
| 723.llvm_r: | basepeak = yes |
| 729.abc_r: | basepeak = yes |
| 734.vpr_r: | basepeak = yes |
| 735.gem5_r: | basepeak = yes |
| 750.sealcrypto_r: | basepeak = yes |