This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 238 |
---|---|
SPECfp_rate_base95 | 230 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 4 | 401 | 332 | 4 | 401 | 332 |
102.swim | 4 | 642 | 482 | 4 | 554 | 559 |
103.su2cor | 4 | 539 | 93.5 | 4 | 531 | 95.0 |
104.hydro2d | 4 | 761 | 114 | 4 | 754 | 115 |
107.mgrid | 4 | 518 | 174 | 4 | 475 | 189 |
110.applu | 4 | 500 | 158 | 4 | 498 | 159 |
125.turb3d | 4 | 611 | 242 | 4 | 590 | 250 |
141.apsi | 4 | 339 | 223 | 4 | 338 | 224 |
145.fpppp | 4 | 784 | 441 | 4 | 784 | 441 |
146.wave5 | 4 | 291 | 371 | 4 | 282 | 384 |
SPECfp_rate_base95 | 230 | |||||
SPECfp_rate95 | 238 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Aug-96 |
Hardware Avail: | Jan-96 |
Software Avail: | Sep-96 |
Hardware Information:
Model Name: | HP 9000 Model K410 4-CPU |
---|---|
CPU: | 120 MHz PA-RISC 7200 |
FPU: | Integrated |
Number of CPU(s): | 4 |
Primary Cache: | 256KBI+256KBD off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B3906AA B.10.20.01 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
Base Flags: All: +Oall Linker Flag: All: -Wl, -a,archive Peak Flags: 101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +DC7200 +I/+P 102: +Oall +Ocache_pad_common +Odataprefetch +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +DC7200 +I/+P +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P 103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P 104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P 107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 110: +Oall +Onofastaccess 125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +DC7200 141: +Oall +Onofastaccess +DC7200 145: +Oall 146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl, -a,archive Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Wed Sep 25 17:26:54 PDT 1996