This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 169 |
|---|---|
| SPECfp_rate_base95 | 153 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 1 | 129 | 259 | 1 | 129 | 258 |
| 102.swim | 1 | 285 | 272 | 1 | 173 | 446 |
| 103.su2cor | 1 | 119 | 106 | 1 | 117 | 108 |
| 104.hydro2d | 1 | 236 | 91.6 | 1 | 237 | 91.1 |
| 107.mgrid | 1 | 176 | 128 | 1 | 157 | 143 |
| 110.applu | 1 | 157 | 126 | 1 | 154 | 128 |
| 125.turb3d | 1 | 336 | 110 | 1 | 294 | 125 |
| 141.apsi | 1 | 191 | 98.9 | 1 | 183 | 103 |
| 145.fpppp | 1 | 339 | 255 | 1 | 288 | 300 |
| 146.wave5 | 1 | 115 | 235 | 1 | 114 | 237 |
| SPECfp_rate_base95 | 153 | |||||
| SPECfp_rate95 | 169 | |||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Cupertino, CA |
| Test Date: | Aug-96 |
| Hardware Avail: | Sep-96 |
| Software Avail: | Sep-96 |
Hardware Information:
| Model Name: | HP 9000 Model K450 |
|---|---|
| CPU: | 160 MHz PA-RISC 8000 |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 1MBI+1MBD off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 2GB |
| Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
| Other Hardware: | None |
Software Information:
| Operating System: | HP-UX B.10.20 |
|---|---|
| Compiler: | HP FORTRAN B3906AA B.10.20.01 |
| File System: | HP-UX |
| System State: | Multi-user |
Notes:
Base Flags: All: +Oall +Odataprefetch Linker Flag: All: -Wl,-aarchive Peak Flags: 101: +O3 +Odataprefetch +Oloop_unroll +Onolimit +Oregionsched +Ovectorize 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 103: +O2 +Odataprefetch +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I +P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl,-aarchive The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Wed Sep 25 17:27:24 PDT 1996