SPECint_rate95

Siemens Nixdorf Informationssysteme

RM600 Model E60

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Base # Copies	Base Run Time	Base SPEC Ratio	Peak # Copies	Peak Run Time	Peak SPEC Ratio
099.go	8	338	980	8	326	1016
124.m88ksim	8	144	952	8	124	1105
126.gcc	8	130	940	8	128	959
129.compress	8	118	1098	8	118	1097
130.li	8	146	934	8	134	1020
132.ijpeg	8	188	917	8	185	935
134.perl	8	133	1030	8	111	1235
147.vortex	8	211	922	8	206	946
SPECint_rate_base95			970
			SPECint_rate95			1035

Tester Information:

SPEC License #:	22
Tested By:	SNI, Paderborn / Germany
Test Date:	Dec-97
Hardware Avail:	Apr-98
Software Avail:	Jan-98

Hardware Information:

Model Name:	RM600-E60
CPU:	250 MHz R10000
FPU:	Integrated
Number of CPU(s):	8
Primary Cache:	32KBI+32KBD on chip
Secondary Cache:	8MB(I+D) off chip per CPU
Other Cache:	None
Memory:	4096MB
Disk Subsystem:	24 x 9GB (striped)
Other Hardware:	None

Software Information:

Operating System:	Reliant UNIX 5.44 A 00
Compiler:	pyrC 6.0A00
File System:	VxFS
System State:	Multi user, no extra processes

Notes:

Baseline: 
PASS1 = -qfeedback; PASS2 = [empty]; OPTIMIZE = -WM,-Omips4 -WM,-G44 -dn 
Peak:
099.go: -WM,-G1799 -Wo,-loopunroll,8 -Wo,-unrolllimit,2000 -Wg,-inline_limit,200
124.m88ksim: -WM,-G4000 -KOlimit:3500 -Wg,-inline_limit,1000  -Wo,-splitedges,0 -WM,-pre_opt
-Wo,-loopunroll,32,-unrolllimit,350 -Wb,-br_likely_cntl,60,200 -WG,-space_time:0.5
126.gcc: -WM,-G44 -WG,-boc,0.38,-only_clone_recursion,-recursion_depth,1,-clone_expansion,1.1 -Wb,-prefetch,512,0 -Wo,-recursive_calls
129.compress: -WM,-G44 -Wb,-no_self_copy
130.li: -WM,-G4000 -Wo,-unrolllimit,1000 -WG,-boc,0.35,-inline_limit,1500,-recursion_depth,3,-recursion_limit,400
-WG,-clone_expansion,1.25,-only_clone_recursion -Wg,-dont_prune_zero_edges 
132.ijpeg: -WM,-G44 -Wo,-no_const_in_reg -Wo,-unrolllimit:800 -WG,-space_time:3.4 -Wb,-prefetch,100,0
134.perl: -WM,-G32 -KOlimit:5000 -Wo,-unrolllimit,500 -Wo,-recursive_calls -WG,-boc,0.25 -Wg,-recursion_limit,4700
-Wn,-recursion_limit,1000000,-recursion_depth,1,-only_clone_recursion -Wc,-xjp_mh_opt,1,30 -WM,-no_positioning
147.vortex: -WM,-G46 -Wo,-unrolllimit,1000 -Wg,-boc,0.91,-inline_limit,300

1-pass feedback for 099, 124, 129, 132, 147:
PASS1 = -qfeedback -WM,-Omips4 -dn 
PASS2 = -WM,-Omips4 -dn, plus: see above

2-pass feedback for 126, 130, 134:
PASS1 = -qfeedback -WM,-Omips4 -dn
PASS2 = -qfeedback2 -WM,-Omips4 -dn, plus: see above
fdo_run1 = %command%
fdo_run2 = %command%
fdo_post2 = ksh -c "cd %benchtop%/src; `grep '/usr/opt/pyrC/bin/cc' %benchtop%/src/make2.out | tail -1 | sed -e 's/-qfeedback2/-WM,-use_fb2/'`"
i.e. use all flags of PASS2 except that "-qfeedback2" is replaced by "-WM,-use_fb2"

For Portability: 134.perl: -DI_TIME -DI_SYS_TIME

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).