SPECfp_rate95

Sun Microsystems

Ultra 5 Model 270

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Base # Copies	Base Run Time	Base SPEC Ratio	Peak # Copies	Peak Run Time	Peak SPEC Ratio
101.tomcatv	2	469	142	2	436	153
102.swim	2	817	189	2	714	217
103.su2cor	2	581	43.4	2	562	44.8
104.hydro2d	2	910	47.5	2	895	48.3
107.mgrid	2	567	79.4	2	565	79.6
110.applu	2	619	64.0	2	499	79.3
125.turb3d	2	987	74.8	2	774	95.4
141.apsi	2	623	60.7	2	602	62.8
145.fpppp	2	1975	87.5	2	885	195
146.wave5	2	492	110	2	409	132
SPECfp_rate_base95			81.1
			SPECfp_rate95			96.5

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Sep-98
Hardware Avail:	Nov-98
Software Avail:	Oct-98

Hardware Information:

Model Name:	Ultra 5 Model 270
CPU:	270 MHz UltraSPARC-IIi
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	256KB(I+D) off chip
Other Cache:	None
Memory:	512MB
Disk Subsystem:	1 x 4.3GB
Other Hardware:	Fast Ethernet
	System clock frequency: 90 MHz

Software Information:

Operating System:	Solaris 2.6 3/98
Compiler:	Sun f77 SF775.0 EFT1 (8/98)
File System:	UFS
System State:	Single User
Kernel Extensions:

Notes:

P1= -xprofile=collect:`pwd`/../feedback
P2= -xprofile=use:`pwd`/../feedback
BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp; 
Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch
Peak:    
101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch -Qoption iropt -O4+data_access
102.swim:    -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2
103.su2cor:  -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2  ${BCOPY}
103.su2cor:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde -fsimple=2
104.hydro2d: PASS1= ${P1}; PASS2= ${P2}
107.mgrid:   -fast -xarch=v8plusa -xprefetch -fsimple=2  ${BCOPY}
107.mgrid:   PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
110.applu:   -fast -xarch=v8plusa -Qoption iropt -O4+scalarrep+ddint+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr -fsimple=2
125.turb3d:  -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
125.turb3d:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
141.apsi:    -fast -xarch=v8plusa -xchip=ultra3 -fsimple=2 -stackvar  -Qoption iropt -Si36  ${INV} -Qoption iropt -O4+algassoc
141.apsi:    PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
145.fpppp:   -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1
145.fpppp:   PASS1= ${P1}; PASS2= ${P2}
146.wave5:   -fast -xarch=v8plusa  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Shell limits: # ulimit -n 1024  or % limit descriptors 1024
Config file: ultra5_fp.cfg

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).