SPECfp95

Sun Microsystems

Sun Enterprise 3500

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	46.8	79.1	39	94.6
102.swim	8600	40.4	213	35	242
103.su2cor	1400	42.1	33.3	32	43.1
104.hydro2d	2400	46.0	52.2	43	56.0
107.mgrid	2500	26.5	94.4	27	92.8
110.applu	2200	137	16.0	124	17.7
125.turb3d	4100	220	18.7	211	19.5
141.apsi	2100	73.2	28.7	73	28.6
145.fpppp	9600	398	24.1	251	38.3
146.wave5	3000	111	27.0	98	30.7
SPECfp_base95			41.6
		SPECfp95			47.6

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Sep-98
Hardware Avail:	Dec-98
Software Avail:	Oct-98

Hardware Information:

Model Name:	Sun Enterprise 3500
CPU:	400MHz UltraSPARC II
FPU:	Integrated
Number of CPU(s):	6
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	4096KB(I+D) off chip
Other Cache:	None
Memory:	8192MB
Disk Subsystem:	2 x 9GB
Other Hardware:	FastEthernet

Software Information:

Operating System:	Solaris 2.7
Compiler:	Sun F77 5.0
File System:	UFS
System State:	Multi-User
Kernel Extensions:

Notes:

BCOPY =  -Qoption iropt -O4+bcopy
INV =    -Qoption iropt -O4+invccexp
FULTRA = -xarch=v8plusa -xchip=ultra
Baseline: -fast -xarch=v8plusa -xprefetch -xparallel
101.tomcatv: -fast ${FULTRA} -xpad=local:23 -xprefetch -xparallel -xreduction
102.swim: -fast ${FULTRA} -xpad=common:15 -xprefetch -fsimple=2 -xparallel
103.su2cor: -fast ${FULTRA} -xvector -Qoption cg -Qms_pipe+nfll=5
103 cont: -fsimple=2 -xprefetch ${BCOPY} -xparallel -xreduction -lmvec 
104.hydro2d: -fast ${FULTRA} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use -xparallel
107.mgrid: -fast ${FULTRA} -xprefetch ${BCOPY} -xparallel
110.applu: -fast ${FULTRA} -fsimple=2 -xparallel
110.cont: -Qoption iropt -O4+ddint+scalarrep+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr
125.turb3d: -fast ${FULTRA} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
141.apsi: -fast ${FULTRA} -fsimple=2 -stackvar -Qoption iropt
141 cont: -Si36 ${INV} -Qoption iropt -O4+algassoc 
145.fpppp: -fast ${FULTRA} -xO5 -xsafe=mem -fsimple=2 
145 cont: -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1 -xprofile=use 
146.wave5: -fast ${FULTRA}  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Config Version @(#)udm.cfg 1.0 98/09/03

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).