# Contents © Copyright 2014, Standard Performance Evaluation Corporation # # This is a comment line as are all lines starting with "#". # # This file contains the information used by the ProEscore program to # to generate the Benchmark report. It is intended to allow the # ProEscore program to be independant of the version of ProE being # evaluated. # # # The following line must exactly match the beginning of the ProE # generated version/copyright line found near the beginning of the # trail file that was generated when the apc.txt file was run. !Creo TM Version P-10-16 # # The following line defines a reference time and weight for File Time # If it is non-zero, then it will be included in the score. file 0 1.0 # # The following line enforces a requirement for generating a score: require 103 steps 8 tests 8 groups # # The following "group" lines assign: # a reference time # a label # to each group number. # # NOTE: group 0 is not counted in the "require" line because # group 0 is automatically used to collect any unassigned tests. # group reference times are 100 because scoring is done at the step level group 0 100 0.0 Unassigned_Steps group 1 100 1.0 CPU Composite group 2 100 1.0 I/O Composite group 3 100 0.75 Wireframe Graphics Subscore group 4 100 1.0 Shaded Graphics Subscore group 5 100 1.0 Shaded Edges Graphics Subscore group 6 100 1.0 Shaded Reflection Graphics Subscore group 7 100 1.0 Hidden Graphics Subscore group 8 100 1.0 No-hidden Graphics Subscore # # The following "test" lines assign: # a reference time in seconds # a weight # an optional label # to each test number. # # NOTE: test 0 is not counted in "require" record because # test 0 is automatically used to collect any unassigned steps. # test reference times are 100 because scoring is done at the step level test 0 100 0.0 unassigned_steps test 1 100 1.0 Worldcar_Graphics test 2 100 1.0 Worldcar_Regen test 3 100 1.0 Worldcar_Retessellation test 4 100 1.0 Worldcar_Engine_Mass_Properties test 5 100 1.0 Worldcar_Load_Erase_Load test 6 100 1.0 Worldcar_Body_Graphics test 7 100 1.0 IGES_Import_Export test 8 100 1.0 Worldcar_Engine_Drawing_New # # The following "step" lines assign: # a step number # a test number # a group number # reference runtime (sec) # an optional label # to each "elapsed time" time stamp found in the trail file # numbered in order from 1. # 1 start graphical test sequence for file 0000_worldcar_2001_toplevel.asm step 1 0 0 116 open files 0000_worldcar_2001_toplevel.asm/turn off datum display/activate fastHLR step 2 0 0 6 set up RUTH named view step 3 0 0 1 snapshot step 4 1 4 137 shaded mode rotate/pan/zoom step 5 1 1 12 explode shaded model step 6 0 0 1 snapshot step 7 1 4 134 exploded shaded mode rotate/pan/zoom step 8 1 1 454 unexplode/clip model step 9 1 4 361 clipped plane shaded mode rotate/pan/zoom step 10 0 0 6 turn off clipping/switch to shaded with edges mode step 11 0 0 0 snapshot step 12 1 5 187 shaded with edges mode rotate/pan/zoom step 13 0 0 5 switch to shaded with reflection mode step 14 0 0 1 snapshot step 15 1 6 239 shaded with reflection mode rotate/pan/zoom step 16 1 1 13 switch to wireframe mode step 17 0 0 0 snapshot step 18 1 3 110 wireframe mode rotate/pan/zoom step 19 0 0 3 switch to no-hidden mode step 20 0 0 0 snapshot step 21 1 8 645 no-hidden mode rotate/pan/zoom step 22 0 0 6 switch to hidden mode step 23 0 0 1 snapshot step 24 1 7 787 hidden mode rotate/pan/zoom step 25 0 0 7 switch to shaded mode/enable full screen 2X anti-aliasing step 26 1 4 155 full screen 2X anti-aliasing shaded mode rotate/pan/zoom step 27 0 0 2 enable full screen 4X anti-aliasing step 28 1 4 174 full screen 4X anti-aliasing shaded mode rotate/pan/zoom step 29 0 0 2 enable full screen 8X anti-aliasing step 30 0 0 1 snapshot step 31 1 4 204 full screen 8X anti-aliasing shaded mode rotate/pan/zoom step 32 0 0 18 switch to shaded reflection mode/set transparency with color step 33 0 0 0 snapshot step 34 1 6 423 shaded reflection mode 8x AA with OIT transparent body rotate/pan/zoom step 35 1 6 181 set up complex lighting step 36 1 6 380 shaded reflection mode 8x AA with OIT and complex lighting rotate/pan/zoom step 37 0 0 111 erase and load advanced model/turn off datum planes step 38 0 0 7 set up RUTH named view step 39 1 6 418 shaded with reflection mode 8x AA rotate/pan/zoom step 40 0 0 2 Enable SSAO step 41 0 0 1 snapshot step 42 1 6 601 shaded with reflection mode 8x AA and SSAO rotate/pan/zoom step 43 0 0 2 Disable SSAO step 44 0 0 10 Enable perspective\select background step 45 0 0 3 snapshot step 46 1 6 572 shaded with reflection mode 8x AA rotate/pan/zoom in perspective render mode step 47 1 2 11 Disable perspective render mode/turn on datum display/erase file step 48 0 0 0 start regeneration sequence for file 0000_worldcar_2001_toplevel.asm step 49 0 0 98 open file 0000_worldcar_2001_toplevel.asm step 50 0 0 1 turn off datum display step 51 2 1 39 regenerate file 0000_worldcar_2001_toplevel.asm's three subassemblies step 52 2 2 8 turn on datum display/erase file 0000_worldcar_2001_toplevel.asm from session step 53 0 0 0 start retessellation sequence for file 0000_worldcar_2001_toplevel.asm step 54 3 2 96 open file 0000_worldcar_2001_toplevel.asm step 55 0 0 2 turn datum display off/zoom step 56 3 1 62 retessellate file 0000_worldcar_2001_toplevel.asm to level 5 and back to 10 step 57 3 2 9 turn on datum display/erase file 0000_worldcar_2001_toplevel.asm from session step 58 0 0 0 start mass properties analysis sequence for file 01-20000.asm step 59 4 2 20 turn off datum display/open file 01-20000.asm step 60 0 0 2 zoom 01-20000.asm step 61 4 1 15 run mass properties analysis step 62 0 0 2 turn on datum display/erase file 01-20000.asm from session step 63 5 2 96 open file 0000_worldcar_2001_toplevel.asm step 64 5 2 9 turn off datum display/erase file 0000_worldcar_2001_toplevel.asm from session step 65 5 2 98 open file 0000_worldcar_2001_toplevel.asm step 66 5 2 9 zoom/turn on datum display/erase file 0000_worldcar_2001_toplevel.asm from session step 67 0 0 0 start worldcar body graphical test sequence step 68 6 2 16 open worldcar body file 8111000.asm step 69 0 0 1 turn off datum display/fastHLR already activated/switch to no hidden mode/enable 8x AA step 70 6 8 188 no-hidden mode 8x AA rotate/pan/zoom step 71 0 0 2 switch to hidden mode step 72 6 7 233 hidden mode 8x AA rotate/pan/zoom step 73 0 0 8 set edge quality to very high step 74 6 7 308 very high edge quality wireframe mode 8x AA rotate/pan/zoom step 75 0 0 9 set edge quality to default medium/switch to wireframe mode step 76 6 3 61 wireframe mode 8x AA rotate/pan/zoom step 77 0 0 1 disable anti-aliasing/switch to shaded mode step 78 6 4 125 shaded mode rotate/pan/zoom step 79 0 0 2 switch to shaded with edges mode step 80 6 5 166 shaded with edges mode rotate/pan/zoom step 81 0 0 1 switch to shaded with reflection mode step 82 6 6 389 shaded with reflection mode rotate/pan/zoom step 83 0 0 2 default view/switch to shaded with edges mode/enable full screen 2X anti-aliasing step 84 6 5 234 full screen 2X anti-aliasing shaded with edges mode rotate/pan/zoom step 85 0 0 2 default view/enable full screen 4X anti-aliasing step 86 6 5 251 full screen 4X anti-aliasing shaded with edges mode rotate/pan/zoom step 87 0 0 2 default view/enable full screen 8X anti-aliasing step 88 6 5 275 full screen 8X anti-aliasing shaded with edges mode rotate/pan/zoom step 89 0 0 1 default view/set shaded reflection mode/disable AA step 90 0 0 1 turn on datum display/erase file 8111000.asm from session step 91 0 0 0 start start drawing sequence and export of iges files sequence step 92 7 2 38 open file 4901000.asm step 93 0 0 1 turn off datum display step 94 7 2 43 export file 4901000.asm/create file 4901000.igs step 95 0 0 4 open file 4903000.asm step 96 0 0 5 export file 4903000.asm/create file 4903000.igs step 97 0 0 2 create file 4903000_asm.asm/import file 4903000.igs step 98 0 0 6 erase all files from current session step 99 0 0 0 start EngineDrawingNew sequence step 100 8 2 20 open file 01-20000.asm step 101 8 1 49 drawing creation process step 102 8 1 8 draw back, bottom, front, left, right, top of image step 103 0 0 2 erase all files from current session