| MPI2007 license: | 021 | Test date: | Feb-2008 |
|---|---|---|---|
| Test sponsor: | Scali, Inc | Hardware Availability: | Sep-2007 |
| Tested by: | Scali, Inc | Software Availability: | Feb-2008 |
SPEC has determined that this result was not in compliance with the SPEC
MPI2007 run and reporting rules. Specifically, the result did not meet the
requirement for baseline optimization flags to not use assertion flags (the
flag -fno-alias is a violation of this rule). The result was found to be
performance neutral compared to runs without -fno-alias. Replacement
results could not be produced because of system access limitations.
Results Table
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 104.milc | NC | NC | NC | NC | NC | NC | NC | |||||||
| 107.leslie3d | NC | NC | NC | NC | NC | NC | NC | |||||||
| 113.GemsFDTD | NC | NC | NC | NC | NC | NC | NC | |||||||
| 115.fds4 | NC | NC | NC | NC | NC | NC | NC | |||||||
| 121.pop2 | NC | NC | NC | NC | NC | NC | NC | |||||||
| 122.tachyon | NC | NC | NC | NC | NC | NC | NC | |||||||
| 126.lammps | NC | NC | NC | NC | NC | NC | NC | |||||||
| 127.wrf2 | NC | NC | NC | NC | NC | NC | NC | |||||||
| 128.GAPgeofem | NC | NC | NC | NC | NC | NC | NC | |||||||
| 129.tera_tf | NC | NC | NC | NC | NC | NC | NC | |||||||
| 130.socorro | NC | NC | NC | NC | NC | NC | NC | |||||||
| 132.zeusmp2 | NC | NC | NC | NC | NC | NC | NC | |||||||
| 137.lu | NC | NC | NC | NC | NC | NC | NC | |||||||
| Hardware Summary | |
|---|---|
| Type of System: | Homogenous |
| Compute Node: | Linux Networx LS-1 |
| Interconnect: | InfiniBand |
| File Server Node: | Linux Networx LS1 I/O Nodes |
| Total Compute Nodes: | 8 |
| Total Chips: | 16 |
| Total Cores: | 32 |
| Total Threads: | 32 |
| Total Memory: | 64 GB |
| Base Ranks Run: | 32 |
| Minimum Peak Ranks: | -- |
| Maximum Peak Ranks: | -- |
| Software Summary | |
|---|---|
| C Compiler: | Intel C 9.1.045 |
| C++ Compiler: | Intel C++ 9.1.045 |
| Fortran Compiler: | Intel Fortran 9.1.040 |
| Base Pointers: | 64-bit |
| Peak Pointers: | Not Applicable |
| MPI Library: | Scali MPI Connect 5.6.1-58818 |
| Other MPI Info: | IB Gold VAPI |
| Pre-processors: | None |
| Other Software: | None |
Node Description: Linux Networx LS-1
| Hardware | |
|---|---|
| Number of nodes: | 8 |
| Uses of the node: | compute |
| Vendor: | Linux Networx, Inc. |
| Model: | LS-1 |
| CPU Name: | Intel Xeon 5160 |
| CPU(s) orderable: | 1-2 chips |
| Chips enabled: | 2 |
| Cores enabled: | 4 |
| Cores per chip: | 2 |
| Threads per core: | 1 |
| CPU Characteristics: | 1333 Mhz FSB |
| CPU MHz: | 3000 |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 4 MB I+D on chip per chip |
| L3 Cache: | None |
| Other Cache: | None |
| Memory: | 8 GB (8 x 1GB DIMMs 667 MHz) |
| Disk Subsystem: | 250GB SAS hard drive |
| Other Hardware: | None |
| Adapter: | Mellanox MHGA28-XTC PCI-Express DDR InfiniBand HCA |
| Number of Adapters: | 1 |
| Slot Type: | PCIe x8 |
| Data Rate: | InfiniBand 4x DDR |
| Ports Used: | 1 |
| Interconnect Type: | Infiniband |
| Software | |
|---|---|
| Adapter: | Mellanox MHGA28-XTC PCI-Express DDR InfiniBand HCA |
| Adapter Driver: | IBGD 1.8.2 |
| Adapter Firmware: | 5.1.4 |
| Operating System: | SLES9 SP3 |
| Local File System: | Not applicable |
| Shared File System: | GPFS |
| System State: | multi-user |
| Other Software: | None |
Node Description: Linux Networx LS1 I/O Nodes
| Hardware | |
|---|---|
| Number of nodes: | 8 |
| Uses of the node: | file server |
| Vendor: | Linux Networx, Inc. |
| Model: | LS1 |
| CPU Name: | Intel Xeon 5150 |
| CPU(s) orderable: | 1-2 chips |
| Chips enabled: | 2 |
| Cores enabled: | 4 |
| Cores per chip: | 2 |
| Threads per core: | 1 |
| CPU Characteristics: | 1333 Mhz FSB |
| CPU MHz: | 2660 |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 4 MB I+D on chip per chip |
| L3 Cache: | None |
| Other Cache: | None |
| Memory: | 4 GB (4 x 1GB DIMMs 667 MHz) |
| Disk Subsystem: | 18 TB SAN interconnected by FC4 |
| Other Hardware: | None |
| Adapter: | Mellanox MHGA28-XTC PCI-X DDR InfiniBand HCA |
| Number of Adapters: | 1 |
| Slot Type: | PCIe x8 |
| Data Rate: | InfiniBand 4x DDR |
| Ports Used: | 1 |
| Interconnect Type: | InfiniBand |
| Software | |
|---|---|
| Adapter: | Mellanox MHGA28-XTC PCI-X DDR InfiniBand HCA |
| Adapter Driver: | IBGD 1.8.2 |
| Adapter Firmware: | 5.2.0 |
| Operating System: | SLES9 SP3 |
| Local File System: | Not applicable |
| Shared File System: | GPFS |
| System State: | multi-user |
| Other Software: | None |
Interconnect Description: InfiniBand
| Hardware | |
|---|---|
| Vendor: | QLogic |
| Model: | QLogic Silverstorm 9120 Fabric Director |
| Switch Model: | 9120 |
| Number of Switches: | 1 |
| Number of Ports: | 144 |
| Data Rate: | InfiniBand 4x SDR and InfiniBand 4x DDR |
| Firmware: | 4.1.1.1.11 |
| Topology: | Single switch (star) |
| Primary Use: | MPI and filesystem traffic |
General Notes
The following approved srcalts are used tera_tf - fixbuffer wrf2 - fixcalling
Base Compiler Invocation
C benchmarks:
| /opt/scali/bin/mpicc -ccl icc |
C++ benchmarks:
| 126.lammps: | /opt/scali/bin/mpicc -ccl icpc |
Fortran benchmarks:
| /opt/scali/bin/mpif77 -ccl ifort |
Benchmarks using both Fortran and C:
| /opt/scali/bin/mpicc -ccl icc /opt/scali/bin/mpif77 -ccl ifort |
Base Portability Flags
| 121.pop2: | -DSPEC_MPI_CASE_FLAG |
| 127.wrf2: | -DSPEC_MPI_LINUX -DSPEC_MPI_CASE_FLAG |