Performance Summary:

Power Summary:

Power Details:

Validation Errors:

•   No Validation Errors Found

Power Measurement Configuration:

Physical Configuration:

Virtual Configuration:

Notes:

Physical System Notes

• Firmware version PSE113P-1.30 [Lenovo internal version] (Public equivalent: PSE114P-1.30)
• Firmware settings used:
• Operating Mode: Maximum Performance
• Processor Uncore Frequency Scaling: Disable
• Memory Patrol Scrub: Disable
• The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented:
• Yes: hosts, guests
• The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented:
• Yes: hosts, guests
• The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented:
• Yes: hosts, guests

Storage Notes

• The System Under Test has 24 800GB internal SSDs configured as two RAID5 arrays with twelve disks each.
• One of the arrays contains the logical volume for the hypervisor OS that was booted.
• Each RAID disk has a large parition that was made into a volume group. The disks for the VMs were each allocated as a logical volume from one of the volume groups.

Virtualization Software Notes

• The following packages for SLES 12 SP3 from SUSE were updated on the SUT to provide the mitigations for CVE-2017-5754, CVE-2017-5753, and CVE-2017-5715:
• kernel-devel-4.4.114-94.11.2.noarch.rpm kernel-default-devel-4.4.114-94.11.3.x86_64.rpm kernel-default-4.4.114-94.11.3.x86_64.rpm kernel-macros-4.4.114-94.11.2.noarch.rpm kernel-source-4.4.114-94.11.2.noarch.rpm
• qemu-block-rbd-2.9.1-6.12.1.x86_64.rpm qemu-ipxe-1.0.0-6.12.1.noarch.rpm qemu-block-curl-2.9.1-6.12.1.x86_64.rpm qemu-block-ssh-2.9.1-6.12.1.x86_64.rpm qemu-vgabios-1.10.2-6.12.1.noarch.rpm qemu-kvm-2.9.1-6.12.1.x86_64.rpm qemu-sgabios-8-6.12.1.noarch.rpm qemu-seabios-1.10.2-6.12.1.noarch.rpm qemu-tools-2.9.1-6.12.1.x86_64.rpm qemu-2.9.1-6.12.1.x86_64.rpm qemu-x86-2.9.1-6.12.1.x86_64.rpm
• The following kernel boot options were used:
• audit=0 elevator=deadline hpet=disable clocksource=tsc tsc=reliable nohz=on highres=off cgroup_disable=cpu,cpuacct,memory,blkio,hugetlb intel_iommu=on iommu=pt pci=realloc intel_idle.max_cstate=0 processor.max_cstate=1 mce=ignore_ce nowatchdog ipv6.disable=1 default_hugepagesz=1G hugepagesz=1G
• The following services were disabled after OS installation:
• cron, irqbalance, postfix, smartd
• The following items were added in /usr/lib/sysctl.d/99-specvirt.conf:
• fs.aio-max-nr = 1572864
• kernel.perf_event_max_sample_rate = 250
• kernel.sched_compat_yield = 1
• kernel.sched_min_granularity_ns = 30000000
• kernel.sched_wakeup_granularity_ns = 30000000
• kernel.sched_latency_ns = 100000
• kernel.sched_migration_cost_ns = 13000
• kernel.sched_rt_runtime_us = 960000
• kernel.numa_balancing = 0
• vm.dirty_background_ratio = 5
• vm.dirty_ratio = 10
• vm.swappiness = 0
• Configuration file /etc/modprobe.d/i40e.conf includes:
• blacklist i40evf
• options i40e max_vfs=0,0,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64,64
• Network configuration was as follows:
• Ethernet devices eth2, eth3, eth4, eth5, eth8, eth9, eth12, and eth13 were the physical functions that were used by the host to provide physical transport for the virtual functions.
• Kernel module i40e does not have a max_vfs option and ignores it. Instead, a systemd initialization script reads the max_vfs option from /etc/modprobe.d/i40e.conf and allocates the virtual functions.
• 357 virtual functions were used for all the VMs.
• All VMs were assigned a VF that is routed to the NUMA node to which the VM's VCPUs were pinned.
• After the system booted, 1GB huge pages were manually allocated on the NUMA nodes. 348 hugepages were each allocated on nodes 0 and 2. 349 huge pages were allocated on nodes 1 and 3.
• After the system booted, a kernel scheduler option was set manually with the command: echo NO_WAKEUP_PREEMPTION >/sys/kernel/debug/sched_features
• VM configurations were as follows:
• All VMs were managed with libvirt and created using the virsh utility.
• All VMs were created with the following XML template:
  • <domain type='kvm'>
  •   <name>$vm_name</name>
  •   <memory unit='MiB'>$vm_memory</memory>
  •   <vcpu cpuset='$host-cpu-list'>$vm_vcpus</vcpu>
  •   <os>
  •     <type arch='x86_64' machine='pc'>hvm</type>
  •     <boot dev='hd'/>
  •   </os>
  •   <features>
  •     <acpi/>
  •   </features>
  •   <cpu mode='host-passthrough'>
  •     <topology sockets='1' cores='$vm_vcpus' threads='1'/>
  •   </cpu>
  •   <clock offset='variable' adjustment='0' basis=utc'>
  •     <timer name='pit' tickpolicy='delay'/>
  •     <timer name='rtc' tickpolicy='catchup'/>
  •     <timer name='hpet' present='no'/>
  •   </clock>
  •   <on_poweroff>destroy</on_poweroff>
  •   <on_reboot>restart</on_reboot>
  •   <on_crash>restart</on_crash>
  •   <devices>
  •     <emulator>/usr/bin/qemu-kvm</emulator>
  •     <disk type='block' device='disk'>
  •     <driver name='qemu' type='raw' cache='none' io='native'/>
  •     <source dev='$vm_disk'/>
  •     <target dev='vda' bus='virtio'/>
  •     </disk>
  •     <interface type='hostdev' managed='yes'>
  •       <mac address='$mac'/>
  •       <source>
  •         <address type='pci' domain='0x0000' bus='$bus' slot='$slot' function='$function'/>
  •       </source>
  •     </interface>
  •     <serial type='pty'>
  •       <target port='0'/>
  •     </serial>
  •     <console type='pty'>
  •      <target type='serial' port='0'/>
  •     </console>
  •     <input type='mouse' bus='ps2'/>
  •     <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/>
  •     <memballoon model='none'/>
  •   </devices>
  • </domain>
• App, Db, Mail, Web, and Batch VMs have this additional XML:
  •   <memoryBacking>
  •     <hugepages>
  •       <page size='1' unit='GiB'/>
  •     </hugepages/>
  •   </memoryBacking>
• Db and Mail VMs have this additional XML for their data disk:
  •   <disk type='block' device='disk'>
  •     <driver name='qemu' type='raw' cache='none' io='native'/>
  •     <source dev='$vm_data_disk'/>
  •     <target dev='vdb' bus='virtio'/>
  •   </disk>
• VMs were bound to host CPUs via their XML configuration in the following manner:
  • All VMs of tiles 04, 07, 10, 13, 20, 23, 26, 29, 36, 39, 42, 45, 52, 55, 58, 61, and 68 were bound to NUMA node 0.
  • All VMs of tiles 01, 08, 11, 14, 17, 24, 27, 30, 33, 40, 43, 46, 49, 56, 59, 62, and 65, except Db for tile 65, were bound to NUMA node 1.
  • All VMs of tiles 02, 05, 12, 15, 18, 21, 28, 31, 34, 37, 44, 47, 50, 53, 60, 63, and 66 were bound to NUMA node 2.
  • All VMs of tiles 03, 06, 09, 16, 19, 22, 25, 32, 35, 38, 41, 48, 51, 54, 57, 64, and 67 were bound to NUMA node 3.
• App VMs were reniced 0.
• Db VMs were reniced -3.
• Web VMs were reniced -3.
• Mail VMs were reniced 19.
• Infra VMs were reniced 19.
• Batch VMs were reniced -16.

Web Server VM Notes

• The following boot options were used:
• selinux=0 audit=0 elevator=deadline clocksource=tsc tsc=reliable highres=off ipv6.disable=1 nowatchdog intel_idle.max_cstate=0 processor.max_cstate=1 cgroup_disable=memory,cpu,blkio
• The following services were disabled:
• abrt-ccpp abrt-oops abrtd atd auditd autofs certmonger cgconfig cgred cpuspeed crond cups haldaemon htcacheclean httpd ip6tables iptables irqbalance kdump mcelogd messagebus netconsole nfs nfslock nginx ntpd ntpdate numad oddjobd php-fpm portreserve postfix psacct quota_nld rdisc restorecond rhnsd rhsmcertd rngd rpcgssd rpcsvcgssd saslauthd smartd sssd svnserve sysstat winbind ypbind
• root file system mount options: noatime,barrier=0
• Intel i40evf version 2.0.30 kernel module was built and installed from offical source code with default options.
• Created /sbin/ifup-local to run the commands: ethtool -C eth0 adaptive-rx off adaptive-tx off rx-usecs 2500; ethtool -K eth0 gro on gso on
• The tuned package was installed and activated with the virtual-guest profile.
• The following items were added in /etc/sysctl.conf:
• fs.file-max = 500000
• net.core.somaxconn = 81920
• net.ipv4.conf.default.arp_filter = 1
• net.ipv4.conf.all.arp_filter = 1
• net.ipv4.tcp_max_tw_buckets = 1500000
• net.ipv4.tcp_tw_reuse=1
• net.ipv4.tcp_tw_recycle = 1
• net.ipv4.tcp_keepalive_time = 120
• net.ipv4.tcp_keepalive_intvl = 30
• net.ipv4.tcp_timestamps = 0
• vm.swappiness = 0
• The following lines were added to /etc/security/limits.conf:
• * soft memlock unlimited
• * hard memlock unlimited
• The following commands were run before the benchmark was started:
• ulimit -n 1048576
• ulimit -u 1000000
• The php-fpm package was installed. /etc/php-fpm.d/www.conf changes:
• user = nginx
• group = nginx
• pm.max_children = 700
• pm.start_servers = 100
• pm.min_spare_servers = 100
• pm.max_spare_servers = 200
• /etc/nginx/nginx.conf changes:
• worker_processes 4;
• worker_cpu_affinity 0001 0001 0010 0010;
• worker_rlimit_nofile 65535;
• #error_log /var/log/nginx/error.log warn;
• use epoll;
• worker_connections 65535;
• multi_accept on;
• accept_mutex off;
• # log_format main '$remote_addr - $remote_user [$time_local] "$request" '
• # '$status $body_bytes_sent "$http_referer" '
• # '"$http_user_agent" "$http_x_forwarded_for"';
• log_format common '$remote_addr - $remote_user [$time_local] $request'
•   '"$status" $body_bytes_sent ';
• access_log /var/log/nginx/access.log.gz common gzip buffer=4m flush=1m;
• sendfile_max_chunk 1m;
• tcp_nopush on;
• tcp_nodelay on;
• keepalive_timeout 120;
• keepalive_requests 10000;
• open_file_cache max=204800 inactive=20s;
• open_file_cache_min_uses 1;
• open_file_cache_valid 30s;
• open_file_cache_errors on;
• read_ahead 4096;
• charset utf-8;
• server_names_hash_bucket_size 128;
• client_header_buffer_size 2k;
• large_client_header_buffers 4 4k;
• /etc/nginx/conf.d/default.conf changes:
• upstream fastcgi_backend {
•   server 127.0.0.1:9000;
•   keepalive 128;
• }
• listen 80 backlog=81920;
• location / {
•   root /var/www/html;
•   index index.html index.htm index.php;
• }
• location = /error.log {
•   root /var/log/nginx;
• }
• location ~ .*\.(html|htm|gif|jpg|jpeg|bmp|png|ico|txt|js|css)$ {
•   root /var/www/html;
•   expires 100d;
• }
• location ~ ^/images/ {
•   root /var/www/html/support;
•   expires 100d;
• }
• location ~ \.php$ {
•   root html;
•   fastcgi_pass fastcgi_backend;
•   fastcgi_keep_conn on;
•   fastcgi_index index.php;
•   fastcgi_param SCRIPT_FILENAME /var/www/html$fastcgi_script_name;
•   include fastcgi_params;
• }
• /etc/nginx/conf.d/ssl.conf changes:
• server {
•   listen 443 ssl backlog=81920;
•   ssl on;
•   ssl_certificate /etc/pki/tls/certs/localhost.crt;
•   ssl_certificate_key /etc/pki/tls/private/localhost.key;
•   ssl_session_cache shared:SSL:1m;
•   ssl_session_timeout 5m;
•   ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2;
•   ssl_ciphers ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW;
•   ssl_prefer_server_ciphers on;
•   location / {
•     root /var/www/html;
•     index index.html index.htm index.php;
•   }
•   location ~ .*\.(html|htm|gif|jpg|jpeg|bmp|png|ico|txt|js|css)$ {
•     root /var/www/html;
•     expires 100d;
•   }
•   location ~ ^/images/ {
•     root /var/www/html/support;
•     expires 100d;
•   }
•   location ~ \.php$ {
•     root html;
•     fastcgi_pass fastcgi_backend;
•     fastcgi_keep_conn on;
•     fastcgi_index index.php;
•     fastcgi_param SCRIPT_FILENAME /var/www/html$fastcgi_script_name;
•     include fastcgi_params;
•   }
• }
• Web VM used NFS to access files from infra VM.
• After the Infra VM was booted and its NFS service was up, the Web VM mounted the NFS file system via test automation software.
• The datastore was mounted on /var/www/html/support/downloads
• NFS mount options used: noatime,actimeo=14400,nocto

Application Server VM Notes

• The following boot options were used:
• selinux=0 audit=0 elevator=deadline clocksource=tsc tsc=reliable highres=off ipv6.disable=1 nowatchdog intel_idle.max_cstate=0 processor.max_cstate=1 cgroup_disable=memory,cpu,blkio
• The following services were disabled:
• abrt-ccpp abrt-oops abrtd atd auditd autofs certmonger cgconfig cgred cpuspeed crond cups haldaemon ip6tables iptables irqbalance kdump mcelogd messagebus netconsole nfs nfslock ntpd ntpdate numad oddjobd portreserve postfix psacct quota_nld rdisc restorecond rhnsd rhsmcertd rngd rpcgssd rpcsvcgssd saslauthd smartd sssd svnserve sysstat winbind ypbind
• root file system mount options: noatime,barrier=0
• Intel i40evf version 2.0.30 kernel module was built and installed from offical source code with default options.
• Created /sbin/ifup-local to run the commands: ethtool -C eth0 adaptive-rx off adaptive-tx off rx-usecs 200; ethtool -K eth0 gro on gso on
• The tuned package was installed and activated with the virtual-guest profile.
• The following items were added in /etc/sysctl.conf:
• fs.file-max = 500000
• net.core.somaxconn = 8192
• net.ipv4.conf.default.arp_filter = 1
• net.ipv4.conf.all.arp_filter = 1
• net.ipv4.tcp_max_tw_buckets = 500000
• vm.swappiness = 0
• The following lines were added to /etc/security/limits.conf:
• * soft memlock unlimited
• * hard memlock unlimited
• The following commands were run before the benchmark was started:
• ulimit -n 1048576
• ulimit -u 1000000
• There were two WebSphere profiles, AppSrv01 for SPECjAppServer2004 and AppSrv02 for SPEC Emulator.
• Heap size for AppSrv01 has been changed to 2880 MB.

Mail Server VM Notes

• The following boot options were used:
• selinux=0 audit=0 elevator=deadline clocksource=tsc tsc=reliable highres=off ipv6.disable=1 nowatchdog intel_idle.max_cstate=0 processor.max_cstate=1 cgroup_disable=memory,cpu,blkio
• The following services were disabled:
• abrt-ccpp abrt-oops abrtd atd auditd autofs certmonger cgconfig cgred cpuspeed crond cups haldaemon ip6tables iptables irqbalance kdump lvm2-monitor mcelogd mdmonitor messagebus netconsole nfs nfslock numad oddjobd portreserve postfix psacct quota_nld rdisc restorecond rhnsd rhsmcertd rngd rpcgssd rpcsvcgssd saslauthd smartd sssd svnserve sysstat winbind ypbind
• root file system mount options: noatime,barrier=0
• Mail store file system mount options: noatime,barrier=0,data=writeback
• Intel i40evf version 2.0.30 kernel module was built and installed from offical source code with default options.
• Created /sbin/ifup-local to run the commands: ethtool -C eth0 adaptive-rx off adaptive-tx off rx-usecs 1000; ethtool -K eth0 gro on gso on
• The tuned package was installed and activated with the virtual-guest profile.
• The following items were added in /etc/sysctl.conf:
• fs.file-max = 500000
• net.core.somaxconn = 8192
• net.ipv4.conf.default.arp_filter = 1
• net.ipv4.conf.all.arp_filter = 1
• net.ipv4.tcp_max_tw_buckets = 500000
• The following lines were added to /etc/security/limits.conf:
• * soft memlock unlimited
• * hard memlock unlimited
• The following commands were run before the benchmark was started:
• ulimit -n 1048576
• ulimit -u 1000000
• Dovecot was compiled with default options, and the following dovecot.conf was used:
• base_dir = /var/run/dovecot/
• ssl = no
• ssl_cert =
• ssl_key =
• disable_plaintext_auth = no
• listen = *
• log_path = /var/log/dovecot.log
• mail_debug = no
• mail_location = dbox:/mailstore/dovecot/maildir/%u
• mdbox_rotate_size = 8192
• maildir_very_dirty_syncs = yes
• mbox_very_dirty_syncs = yes
• mbox_write_locks = fcntl
• mmap_disable = yes
• mail_fsync = never
• mailbox_list_index = yes
• mailbox_list_index_very_dirty_syncs=yes
• auth_cache_size = 5000
• passdb {
•   args = scheme=plain /etc/passwd.dovecot
•   driver = passwd-file
• }
• protocols = imap
• service auth {
•   user = root
• }
• service imap-login {
•   inet_listener imap {
•     port = 143
•   }
•   process_min_avail = 10
•   service_count = 0
• }
• service imap {
•   process_min_avail = 10
• }
• userdb {
•   driver = passwd
• }
• dict {
• }

Database Server VM Notes

• The following boot options were used:
• selinux=0 audit=0 elevator=deadline clocksource=tsc tsc=reliable highres=off ipv6.disable=1 nowatchdog intel_idle.max_cstate=0 processor.max_cstate=1 cgroup_disable=memory,cpu,blkio
• The following services were disabled:
• abrt-ccpp abrt-oops abrtd atd auditd autofs certmonger cgconfig cgred cpuspeed crond cups haldaemon ip6tables iptables irqbalance kdump mcelogd messagebus netconsole nfs nfslock ntpd ntpdate numad oddjobd portreserve postfix psacct quota_nld rdisc restorecond rhnsd rhsmcertd rngd rpcgssd rpcsvcgssd saslauthd smartd sssd svnserve sysstat winbind ypbind
• root file system mount options: noatime,barrier=0
• DB storage file system mount options: noatime,barrier=0,data=writeback
• Intel i40evf version 2.0.30 kernel module was built and installed from offical source code with default options.
• Created /sbin/ifup-local to run the commands: ethtool -C eth0 adaptive-rx off adaptive-tx off rx-usecs 250; ethtool -K eth0 gro on gso on
• The tuned package was installed and activated with the virtual-guest profile.
• The following items were added in /etc/sysctl.conf:
• fs.file-max = 500000
• kernel.randomize_va_space=0
• net.core.somaxconn = 32384
• net.ipv4.tcp_max_tw_buckets = 1000000
• net.ipv4.conf.default.arp_filter = 1
• net.ipv4.conf.all.arp_filter = 1
• vm.swappiness = 0
• The following lines were added to /etc/security/limits.conf:
• * soft memlock unlimited
• * hard memlock unlimited
• The following commands were run before the benchmark was started:
• ulimit -n 1048576
• ulimit -u 1000000
• 13312 2MB huge-pages were allocated prior to starting the database instance.
• Database tuning options:
• db2 update db cfg for specdb using DATABASE_MEMORY 6553600
• db2set DB2_LARGE_PAGE_MEM=DB
• db2set DB2_PINNED_BP=ON
• alter bufferpool IBMDEFAULTBP size 5898240
• alter tablespace roll_space NO FILE SYSTEM CACHING
• alter tablespace C_cust_space NO FILE SYSTEM CACHING
• alter tablespace C_supp_space NO FILE SYSTEM CACHING
• alter tablespace C_site_space NO FILE SYSTEM CACHING
• alter tablespace C_parts_space NO FILE SYSTEM CACHING
• alter tablespace C_custinv_space NO FILE SYSTEM CACHING
• alter tablespace M_parts_space NO FILE SYSTEM CACHING
• alter tablespace M_bom_space NO FILE SYSTEM CACHING
• alter tablespace M_wo_space NO FILE SYSTEM CACHING
• alter tablespace M_lo_space NO FILE SYSTEM CACHING
• alter tablespace M_inv_space NO FILE SYSTEM CACHING
• alter tablespace O_cust_space NO FILE SYSTEM CACHING
• alter tablespace O_ords_space NO FILE SYSTEM CACHING
• alter tablespace O_ordl_space NO FILE SYSTEM CACHING
• alter tablespace O_item_space NO FILE SYSTEM CACHING
• alter tablespace S_comp_space NO FILE SYSTEM CACHING
• alter tablespace S_sc_space NO FILE SYSTEM CACHING
• alter tablespace S_po_space NO FILE SYSTEM CACHING
• alter tablespace S_site_space NO FILE SYSTEM CACHING
• alter tablespace S_supp_space NO FILE SYSTEM CACHING
• alter tablespace U_space NO FILE SYSTEM CACHING
• update database config for specdb using LOGFILSIZ 65536
• update database config for specdb using logprimary 64 logsecond 4

Infraserver VM Notes

• The following boot options were used:
• selinux=0 audit=0 elevator=deadline clocksource=tsc tsc=reliable highres=off ipv6.disable=1 nowatchdog intel_idle.max_cstate=0 processor.max_cstate=1 cgroup_disable=memory,cpu,blkio
• The following services were disabled:
• abrt-ccpp abrt-oops abrtd atd auditd autofs certmonger cgconfig cgred cpuspeed crond cups haldaemon htcacheclean httpd ip6tables iptables irqbalance kdump lvm2-monitor mcelogd mdmonitor messagebus netconsole nfs nfslock numad oddjobd portreserve postfix psacct quota_nld rdisc restorecond rhnsd rhsmcertd rngd rpcgssd rpcsvcgssd saslauthd smartd sssd svnserve sysstat winbind ypbind
• root file system mount options: noatime,barrier=0,data=writeback
• Intel i40evf version 2.0.30 kernel module was built and installed from offical source code with default options.
• Created /sbin/ifup-local to run the commands: ethtool -C eth0 rx-usecs 333; ethtool -K eth0 gro on gso on
• The tuned package was installed and activated with the virtual-guest profile.
• The following items were added in /etc/sysctl.conf:
• fs.file-max = 500000
• net.core.somaxconn = 81920
• net.ipv4.conf.default.arp_filter = 1
• net.ipv4.conf.all.arp_filter = 1
• net.ipv4.tcp_max_tw_buckets = 1500000
• net.ipv4.tcp_tw_reuse=1
• net.ipv4.tcp_keepalive_time = 120
• net.ipv4.tcp_keepalive_intvl = 30
• net.ipv4.tcp_timestamps = 0
• net.ipv4.tcp_syn_retries = 4
• net.ipv4.tcp_retries2 = 7
• vm.swappiness=0
• The following lines were added to /etc/security/limits.conf:
• * soft memlock unlimited
• * hard memlock unlimited
• The following commands were run before the benchmark was started:
• ulimit -n 1048576
• ulimit -u 1000000
• httpd.conf changes:
• ServerLimit 10240
• MaxClients 10240
• Listen 81
• Include conf/fcgi.conf
• fcgi package was built from Fedora 14 source RPM, which includes patch to compile with GCC 4.4.
• The following items were added to/etc/httpd/conf/fcgi.conf:
• LoadModule fastcgi_module modules/mod_fastcgi.so
• ScriptAlias /fcgi-bin/ "/var/www/fcgi-bin/"
• FastCgiIpcDir /etc/httpd/fastcgi
• <Directory "/var/www/fcgi-bin">
•   AllowOverride None
•   Options +ExecCGI -Includes
•   SetHandler fastcgi-script
•   Order allow,deny
•   Allow from all
• </Directory>
• AddHandler fastcgi-script fcgi
• FastCgiServer /var/www/fcgi-bin/besim_fcgi.fcgi -processes 50
• Standard Linux NFS server was enabled to serve files to the Web VM.
• /etc/exports file contains:
• /support-download *(rw,async,no_subtree_check,crossmnt,no_root_squash)

Batch Server VM Notes

• The following boot options were used:
• selinux=0 audit=0 elevator=deadline clocksource=tsc tsc=reliable highres=off ipv6.disable=1 nowatchdog intel_idle.max_cstate=0 processor.max_cstate=1 cgroup_disable=memory,cpu,blkio
• The following services were disabled:
• abrt-ccpp abrt-oops abrtd atd auditd autofs certmonger cgconfig cgred cpuspeed crond cups haldaemon ip6tables iptables irqbalance kdump lvm2-monitor mcelogd mdmonitor messagebus netconsole nfs nfslock numad oddjobd portreserve postfix psacct quota_nld rdisc restorecond rhnsd rhsmcertd rngd rpcgssd rpcsvcgssd saslauthd smartd sssd svnserve sysstat winbind ypbind
• root file system mount options: noatime,barrier=0
• Intel i40evf version 2.0.30 kernel module was built and installed from offical source code with default options.
• The tuned package was installed and activated with the virtual-guest profile.
• The following items were added in /etc/sysctl.conf:
• fs.file-max = 500000
• net.core.somaxconn = 8192
• net.ipv4.tcp_max_tw_buckets = 500000
• net.ipv4.conf.default.arp_filter = 1
• net.ipv4.conf.all.arp_filter = 1
• The following lines were added to /etc/security/limits.conf:
• * soft memlock unlimited
• * hard memlock unlimited
• The following commands were run before the benchmark was started:
• ulimit -n 1048576
• ulimit -u 1000000

Client Driver Notes

• Four client systems each host eight prime client VMs. Four client systems each host nine prime client VMs. One client system hosts the prime controller VM.
• Each prime client VM has 8 VCPUs, 10 GB memory, and a 16 GB disk. 1 ixgbevf and 1 virtio_blk device were used in all client VMs.
• All prime client VMs run Red Hat Enterprise Linux 6.10.

Power Configuration Notes

• The SUT has four power supplies.
• The two power meters were each connected to two of the SUT's power supplies via a Y power cable.
• There was no power meter for external storage because there was no external storage.

Other Notes

• An external 10Gb Lenovo RackSwitch G8264 switch was used to connect the client systems to the system under test (SUT).
• The SUT used the four dual-port 10Gb PCIe NICs for communication with the VMs.
• The SUT NICs and the external client systems were connected to the switch using 10Gb SFP+ DAC cables.
• An external 1Gb Lenovo RackSwitch G8052 switch was used to manage all the systems.
• All systems were connected to the 1Gb switch via a separate cable plugged into a 1Gb port on the system.

Performance Details: